After spending a lot of time trying to track down what was going on, I have
isolated the "black screen" failures when using boot1 to boot a G4 machine.
It turns out we were replacing the traps before installing the temporary
BAT entry for the bottom of physical memory. That meant that until the MMU
was bootstrapped, the cached translations were the only thing keeping us
from losing.
Throwing boot1 into the mix was affecting execution flow enough to cause us
to hit an uncached page and crash.
Fix this by properly setting up the initial BAT entry at the same time we
are replacing the OpenFirmware traps, so we can continue executing in
segment 0 until the rest of the DMAP has been set up.
A second thing discovered while researching this is that we were entering a
BAT region for segment 16. It turns out this range was a) considered part
of KVA, and b) has firmware mappings with varying attributes.
If we ever accessed an unmapped page in segment 16, it would cause a BAT
entry to be installed for the whole segment, which would bypass the
existing mappings until it was flushed out again.
Instead, translate the OFW memory attributes into VM memory attributes and
install the ranges into the kernel address space properly.
Reviewed by: adalava
MFC after: 3 weeks
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25547
This fixes spurious "XIVE[ IC 00 ] ISN 1 lead to invalid IVE !" messages
generated by OPAL when running with the debug level cranked up.
Discussed with jhibbits.
Sponsored by: Tag1 Consulting, Inc.
When files are read from .rc or .4th, verify_file is asked to
guess the severity (VE_TRY,VE_WANT,VE_MUST)
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
than command in the loader.conf, the latter needs to be nul terminated,
otherwise garbage trailer left from zfs_nextboot() will be passed to
parse_cmd() together with loader.conf command.
While here, reset cmd to empty string if read() returns error.
Reviewed by: tsoome
To define USDT probes, dtrace -G makes use of relocations for undefined
symbols: the target address is overwritten with NOPs and the location is
recorded in the DOF section of the output object file. To avoid link
errors, the original relocation is destroyed. However, this means that
the same input object file cannot be processed multiple times, as
happens during incremental rebuilds. Instead, only set the relocation
type to NONE, so that all information required to reconstruct USDT
probes is preserved.
Reported by: bdrewery
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
This file is too complicated as it is and has diverged a fair bit from
illumos due to toolchain differences, so just drop unused code
(including SPARC support).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
supposedly having too many segments, when lld 11 links it. Such kernels
should load just fine.
Note that we may still do some tweaking of our kernel linker scripts, to
lower the number of segments, although the exact benefit is not entirely
clear.
The AMD's Ryzen 3 3200g XHCI controllers apparently need the evaluate
control endpoint context command, but we don't need to issue this
command when the bMaxPacketSize is received after the read of the USB
device descriptor, because this part should be handled automatically.
PR: 248784
Tested by: emaste, hselasky
MFC after: 1 week
Sponsored by: Mellanox Technologies
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
with vnode locked, use NOWAIT alloc and only report when we don't overflow.
These changes were accidentally omitted from r364402, except for the not
reporting on overflow. They were lumped in with a debugging commit in my tree
that I omitted w/o realizing this.
Other issues from the review are pending some other changes I need to do first.
It can be useful to know what type of machine we are running on for desktop
related thing.
It also allow us to support all the DMI variable that linux driver can fetch.
MFC after: 1 week
Sponsored by: Sponsored-by: The FreeBSD Foundation
"ipdata.meta.pfs_type & HAMMER2_PFSTYPE_SUPROOT" happened to have
the same result (except HAMMER2_PFSTYPE_DUMMY could also match).
Obtained from: Dragonfly (git 29e6489bbd4f8e237c9c17b300ac8b711f36770)
The XTIME_TO_NSEC macro already calls the htole32(), so there is no need
to call it twice. This code does nothing on LE platforms and affects only
nanosecond and birthtime fields so it's difficult to notice on regular use.
Hinted by: DragonFlyBSD (git ae503f8f6f4b9a413932ffd68be029f20c38cab4)
X-MFC with: r361136
I have no idea what this does (and until now that it even existed), but
apparently it needs this entry changed for the MSG_TLSAPPDATA, since
it is kernel only.
ZFS unmounts a dataset while receiving into it and remounts it afterwards.
But if ZFS is resuming an incomplete receive, it screws up and ends up with
a dataset that is mounted, but returns EIO for every access. This commit
fixes that condition.
While the vulnerable code also exists in OpenZFS, the problem is not
reproducible there. Apparently OpenZFS doesn't unmount the destination
dataset during receive, like FreeBSD does.
PR: 248606
Reviewed by: mmacy
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D26034
The ACPI table-mapping code used pmap_kenter_temporary() to create
mappings, which in turn uses the fixed-size crashdump map. Moreover,
the code was not verifying that the table fits in this map, so when
mapping large tables we could clobber adjacent mappings. This use of
pmap_kenter_temporary() appears to predate support in pmap_mapbios() for
creating early mappings, but that restriction no longer applies.
PR: 248746
Reviewed by: kib, mav
Tested by: gallatin, Curtis Villamizar <curtis@ipv6.occnc.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26125
data records.
The kernel RPC cannot process non-application data records when
using TLS. It must to an upcall to a userspace daemon that will
call SSL_read() to process them.
This patch adds a new flag called MSG_TLSAPPDATA that the kernel
RPC can use to tell sorecieve() to return ENXIO instead of a non-application
data record, when that is what is at the top of the receive queue.
I put the code in #ifdef KERN_TLS/#endif, although it will build without
that, so that it is recognized as only useful when KERN_TLS is enabled.
The alternative to doing this is to have the kernel RPC re-queue the
non-application data message after receiving it, but that seems more
complicated and might introduce message ordering issues when there
are multiple non-application data records one after another.
I do not know what, if any, changes will be required to support TLS1.3.
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D25923
Remove most special treatment for ifnet TLS in the TCP stack, except
for code to avoid mixing handshakes and bulk data.
This code made heroic efforts to send down entire TLS records to
NICs. It was added to improve the PCIe bus efficiency of older TLS
offload NICs which did not keep state per-session, and so would need
to re-DMA the first part(s) of a TLS record if a TLS record was sent
in multiple TCP packets or TSOs. Newer TLS offload NICs do not need
this feature.
At Netflix, we've run extensive QoE tests which show that this feature
reduces client quality metrics, presumably because the effort to send
TLS records atomically causes the server to both wait too long to send
data (leading to buffers running dry), and to send too much data at
once (leading to packet loss).
Reviewed by: hselasky, jhb, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26103
MOUNT notifies when a filesystem is mounted
REMOUNT notifies when a filesystem is mounted again
UNMOUNT notifies when a filesystem is unmounted
These events are asynchronous to the actual state of the event (though the data
is recorded at a time when it is stable). The mount event is reported after the
filesystem is mounted. However, in the interim it may be unmounted by another
agent. Likewise, umount is called just before the mountpoint is finished tearing
down. It may be remounted (or maybe if the process scheduling is wonky and devd
gets to run before the last few steps are complete).
Sponsored by: Netflix
Diffential Revision: https://reviews.freebsd.org/D25969
Report when a filesystem is mounted, remounted or unmounted via devd, along with
details about the mount point and mount options.
Discussed with: kib@
Reviewed by: kirk@ (prior version)
Sponsored by: Netflix
Diffential Revision: https://reviews.freebsd.org/D25969
Linking the full version of clang 11 results in errors similar to:
lld: error: /usr/src/contrib/llvm-project/clang/lib/StaticAnalyzer/Frontend/AnalysisConsumer.cpp:736:(.text._ZN5clang4ento22CreateAnalysisConsumerERNS_16CompilerInstanceE+0xE0): relocation R_MIPS_CALL16 out of range: 48920 is not in [-32768, 32767]; references operator new(unsigned long)
Add -mxgot to the compilation flags for llvm libraries to work around
this error. This may be too big of a hammer, but it can always be
refined later.
MFC after: 6 weeks
Those messages were printed hundreds of times during boot, often multiple
times for each table. We already print information about the tables in
more organized form once to not duplicate it when random ACPI drivers are
attaching.
MFC after: 1 week
The command would only work if PWD happened to be WORKDIR.
Also, exit 1 in case WORKDIR exists, but isn't accessible
by the current user.
PR: 242709
Reported by: Max Fiedler
MFC after: 1 week
