Add a TestFloat based test suite for floating-point implementations
currently supporting sparc64. After a `make depend all` there are
three programs; testsoftfloat for testing against the SoftFloat in
src/lib/libc/softfloat for reference purposes, testemufloat for
testing the emulator source in src/lib/libc/sparc64/fpu and testfloat
for testing with the installed libc. Support for other architectures
can be added as needed.
PR: 144900
Submitted by: Peter Jeremy
Two fixes:
(1) We don't need a custom install_kernel. We can install without
symbols by adding INSTALL_NODEBUG (which likely should be
WITHOUT_KERNEL_SYMBOLS_FILE, or something shorter) to CONF_INSTALL
(2) for make buildenv stage, use NANO_MAKE_CONF_BUILD rather than the
non-existant NANO_MAKE_CONF.
MFC after: 7 days
Stop hard coding i386 as the arch for the build. Instead, default to the
processor we're running on. Also, supply amd64 version of create_diskimage
that's the same as i386's.
# didn't fix the confusion between using the processor for this and using
# the machine (which would be more appropriate). NANO_ARCH smashes the two
# together right now.
MFC after: 7 days
- When we run our trap cleanup handler, echo that we are running this
handler to make it more clear why we are 'suddenly' running df,
umount, and mdconfig.
- Remove trap handler again after we have unconfigured the memory
device etc. Before we could end up running the trap handler if a
later stage failed, which was a bit confusing and not really useful.
MFC after: 2 weeks
Remove GNU cpio after fix of CVE-2010-0624.
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Various testcases that work correctly with stable/8 sh.
Note: this creates some gaps in the numbering due to lower-numbered tests
for new functionality which is not or not yet MFC'ed.
(S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
The devices that supported EVFILT_NETDEV kqueue filters were removed in
r195175. Remove all definitions, documentation, and usage.
The change of function signature for vlan_link_state() was not merged to
maintain the ABI.
The gaps in the numbering sequence cannot really be avoided, as HEAD changes
are not necessarily merged in the same order as they are made (if they are
merged at all).
* retry various system calls on EINTR
* retry the rest after a short read (common if there is more than about 1K
of output)
* block SIGCHLD like system(3) does (note that this does not and cannot
work fully in threaded programs, they will need to be careful with wait
functions)
PR: 90580
- Update config to doxygen 1.5.2 (I use this with 1.5.9).
- Add linprocfs and linsysfs to the linuxulator dox.
- Take the generated includes from the .m files from a subdirectory
instead of putting everything into $(.OBJDIR). This imporves the
human readbility of the source directory contents a lot, if you do not
create a separate OBJDIR.
- Assume UTF-8 encoding for every input file.
- Strip the source and dest path from the output, we are not interested
in the absolute location on the machine where the docs are created,
relative the the root of the FreeBSD source is what interests us.
- Exclude .svn directories.
- Switch to alphabetic index.
- Use one line per INCLUDE_PATH member in the common dox-config.
- Bump the __FreeBSD__ version to 9. [here in the MFC: to 8]
- Switch from hardcoded .m files to an run-time generated one. Takes
a little bit more time to get started with actual work, but at least
is more future-proof. If you generate dox for all subsystems, the
time to find all .m files in the source is magnitutes lower than
producing the docs.
- Make the *DEST_PATH overidable from the environment. This allows to
produce the output directly in the docroot of a webserver.
- Fix the path when telling the user where he can find the API docs.
sh: Fix crash when undefining or redefining a currently executing function
Add a reference count to function definitions.
Memory may leak if a SIGINT arrives in interactive mode at exactly the wrong
time, this will be fixed later by changing SIGINT handling.
PR: bin/137640
Approved by: re (kib)
Fix the conformance of poll(2) for sockets after r195423 by
returning POLLHUP instead of POLLIN for several cases. Now, the
tools/regression/poll results for FreeBSD are closer to that of the
Solaris and Linux.
Also, improve the POSIX conformance by explicitely clearing POLLOUT
when POLLHUP is reported in pollscan(), making the fix global.
Submitted by: bde
Reviewed by: rwatson
MFC r196556
Fix poll() on half-closed sockets, while retaining POLLHUP for fifos.
This reverts part of r196460, so that sockets only return POLLHUP if both
directions are closed/error. Fifos get POLLHUP by closing the unused
direction immediately after creating the sockets.
The tools/regression/poll/*poll.c tests now pass except for two other
things:
- if POLLHUP is returned, POLLIN is always returned as well instead of
only when there is data left in the buffer to be read
- fifo old/new reader distinction does not work the way POSIX specs it
Reviewed by: kib, bde
MFC r196554
Add some tests for poll(2)/shutdown(2) interaction.
Approved by: re (kensmith)
Bugfix: all requests for creating vnets via vimage -c were always
reported as failures, even if the actual library / system call
would succeed, because error message would be reported if the return
value from jail_setv() call was >= 0, and if not, then if that same
value was < 0, i.e. always. The correct behavior is to abort (only)
if jail_setv() returns < 0.
Approved by: re (rwatson), julian (mentor)
Approved by: re (rwatson)
vimage(8) is a legacy CLI interface for managing jails associated with
network stack instances, which is provided for compatibility with
older applications. This change brings it back to life in a followup
to the initial conversion of vimage to use the new jail(4)
userland-kernel API:
- when creating vimages via "vimage -c", by default turn on a few
options expected by legacy applications, such as allow operations on
raw sockets, FS mounts etc, and allow jail-related parameters to be
optionally configured.
- introduce the "-m" modifier which allows for configuring jail
parameters of existing vimages / vnet-jails.
- make "vimage name command ..." actually work.
- when reassigning ifnets to vnets using "vimage -i", attempt to rename
the ifnet as "ethXXX" on arrival in the target vnet. Several legacy
applications are known to depend heavily on such behavior.
- vimage -l lists only jails associated with vnets. The output is
sorted using vimage / jail names as keys.
- vimage -l by default searches only the current level in the jail
hierarchy. Recursive listing can be requested via -r switch.
- vimage -l by default prints only jail names on each line, making
such output suitable for pipelining to other commands. More verbose
output can be obtained via -v switch, and even more jail specific
information will be displayed if -j switch is turned on.
- there's no need to build vimage as statically linked, so update the
Makefile accordingly.
- update the vimage.8 man page.
Approved by: re (rwatson), julian (mentor)
Approved by: re (rwatson)
Start respecting WITHOUT_INET6.
Make regression/priv compile again after the multi-IP jail
changes. Note that we are still using the legacy jail(2)
rather than the jail_set(2)/jail(3) syscall.
Add an IPv4, and an IPv6 loopback address in case we compile
with INET6 enabled.
Make the priv_vfs_extattr_system compile on amd64 as well using the
proper length modifier to printf(3) for ssize_t.
Reviewed by: rwatson
Approved by: re (kib)
o do not force monitor mode; the wlanX ifnet must be an ahdemo mode vap
o move channel change work before marking ifnet up to avoid churning
the state machine
o change default ifnet name to "wlan0"
Approved by: re (kensmith)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
display '+' on them. Taken from kern/125613, with cosmetic
changes.
PR: kern/125613
Submitted by: Jaakko Heinonen <jh at saunalahti dot fi>
Approved by: re (kib)
