Commit Graph

822 Commits

Author SHA1 Message Date
ken
c27186df49 Disable cache syncs for a broken NEC drive.
Reviewed by:	gibbs
Submitted by:	Blaz Zupan <blaz@gold.amis.net>
1998-10-13 23:34:54 +00:00
dg
3defb6d13f Fixed two potentially serious classes of bugs:
1) The vnode pager wasn't properly tracking the file size due to
   "size" being page rounded in some cases and not in others.
   This sometimes resulted in corrupted files. First noticed by
   Terry Lambert.
   Fixed by changing the "size" pager_alloc parameter to be a 64bit
   byte value (as opposed to a 32bit page index) and changing the
   pagers and their callers to deal with this properly.
2) Fixed a bogus type cast in round_page() and trunc_page() that
   caused some 64bit offsets and sizes to be scrambled. Removing
   the cast required adding casts at a few dozen callers.
   There may be problems with other bogus casts in close-by
   macros. A quick check seemed to indicate that those were okay,
   however.
1998-10-13 08:24:45 +00:00
ken
404d9ee9f6 Add quirk entries to disable the synchronize cache command for Micropolis
2217's (reported by Matthew Jacob in NetBSD PR kern/6027) and Fujitsu
M2954's (reported by Tom Jackson).

Some of the Fujitsus at least hang when they get a cache sync command.
(Others just return illegal request.)

Also, make error printing in dashutdown() a little more selective.  Don't
print any error when the sense key is illegal request.  Drives that don't
support the synchronize cache command usually return illegal request.
Also, make sure the scsi status is check condition before going into
scsi_sense_print().

Reviewed by:	gibbs
1998-10-12 17:16:47 +00:00
ken
2543811159 Bring over a quirk entry from the old SCSI code for a Chinon CDROM drive
that returns track numbers in BCD.

Reviewed by:	gibbs
1998-10-12 17:02:37 +00:00
ken
68c2a3a49f Add the quirk entry framework to handle disabling the synchronize cache
command on drives that don't like it.  Right now, there's just a bogus
quirk entry in the table that doesn't do anything, but that should be
changed once we get actual inquiry data for drives that don't like the
synchronize cache command.

Also, add a shutdown hook that runs through all direct access peripherals
and runs a synchronize cache on them if they're still open, and if
synchronize cache isn't disabled via a quirk entry.

Add a synchronize cache call at the end of dadump() (again, conditionalized
on the quirk entry), so we can insure that the disk cache contents get
flushed to physical media after a dump.

Check the new quirk entry in daclose() to decide whether or not to
synchronize the cache for a disk at final close.

Reviewed by:	gibbs
1998-10-08 05:46:38 +00:00
imp
213e62e351 Up the read capacity timeout from 20 seconds to 60 seconds to keep my
JAZ drive happy.  This shouldn't impact fast drives, and will keep cam
from failing on very slow ones (that are spinning up, say).  20
seconds was almost long enough, but not in all cases.

Suggested by: gibbs
1998-10-07 03:09:19 +00:00
ken
e99a1c7e41 Some fixes for the CD and DA drivers from bde. (and some of my own as
well)  Among them:

[ cd driver ]
1. Old labeling code was still there.
2. Error handling for dsopen() was broken (no test for the `error'
   returned by dsopen(); bogus test of an `error' that is known to be 0).
3. cdopen() closed the physical device after certain errors although there
   may still be open partitions on it.
4. cdclose() closed the physical device although there may still be open
   partitions on it.
5. Some printf format fixes was incomplete or missing.
6. cdioctl() truncated unit numbers mod 256.
7. cdioctl() was missing locking.

[ da driver ]
1. daclose() closed the physical device although there may still be open
   partitions on it.  This was fixed many years ago in sd.c rev.1.57.
2. A minor optimization (the dk_slices != NULL test) in sdopen() became
   uglier in daopen().  It is not worth doing.  da only regressed compared
   with od and my version of sd, since I never committed the change to sd.
   daopen() should probably do less if some partition is already open.
   This is not addressed by the diffs.
[ ... ]
5. "opt_hw_wdog.h" was not included, so the HW_WDOG code was unreachable.

- Added a getdev CCB call in the cdopen() and daopen() calls so that the
  vendor name and device name are available for the disklabel.  (suggested
  by bde)

- Removed vestigal devfs support in both drivers, since we can't properly
  work with devfs yet.  (ask bde for details on this)

- Cleaned up the probe code in both drivers in the failure cases.  There
  were a number of things wrong here.  The peripheral driver instances
  weren't getting properly cleaned up.  Sometimes the wrong probe message
  would get printed out (with the failure message appended), so it wasn't
  very clear that we failed to attach.  SCSI sense information was printed,
  even when the error in question wasn't a SCSI error.  I put similar fixes
  into the changer driver in revision 1.2 of scsi_ch.c.

Reviewed by:	gibbs
Submitted by:	bde (partially)
1998-10-07 02:57:57 +00:00
ken
2ec620105a Fix a printf format warning that shows up when CAMDEBUG is defined. 1998-10-02 21:20:21 +00:00
ken
1ad6536975 Add a new CAM debugging mode, CAM_DEBUG_CDB. This causes the kernel to
print out a one line description/dump of every SCSI CDB sent to a
particular debugging target or targets.

This is a good bit more useful than the other debugging modes, I think.

Change some things in LINT to note the availability of this new option.

Fix an erroneous argument to scsi_cdb_string() in scsi_all.c

Reviewed by:	gibbs
1998-10-02 21:00:58 +00:00
ken
555e391274 Modify the changer driver so it can handle (hopefully!) changers that need
block descriptors enabled on mode sense commands.

Basically, we try sending a mode sense with block descriptors disabled (the
previous default), and if it fails, we try sending the mode sense with
block descriptors enabled.  If that works, we note that in a runtime quirk
entry, so we don't bother disabling block descriptors again for the device.

This problem was first reported by Chris Jones <cjones@honors.montana.edu>
on one of the NetBSD lists, but I'd imagine that some FreeBSD users would
have run into it eventually as well, since our changer driver is derived
form the NetBSD changer driver.

Also, change some of the probe logic so that we do the right thing in the
case of a failure to attach.

Fix a memory leak in chgetparams().

Add a couple of inline helper functions to scsi_all.h to correctly return
the start of a mode page.

NetBSD PR:	kern/6214
Reviewed by:	gibbs
1998-10-02 05:25:49 +00:00
ken
c19e09786a Patches from DES to create three new kernel config options to control
timeouts in the SA driver (timeouts for space, rewind and erase).  Folks
can lengthen the timeouts if their hardware is especially slow, or shorten
them if they want to be notified of errors a little sooner.

Also, get rid of two OD driver options.  The od driver has been made
obsolete by the da driver.

Reviewed by:	ken, gibbs
Submitted by:	Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
1998-10-02 05:15:51 +00:00
ken
124f5232aa In the bootverbose case, print out error messages for all errors that will
not be retried again, even if the SF_NO_PRINT flag is set.

Reviewed by:	gibbs
1998-09-29 22:11:30 +00:00
ken
aa7f228f65 Treat not ready errors (asc 0x04) as non-fatal errors for attach. We
already allowed medium not present type errors (0x3a), but some Philips and
HP WORM drives return 0x04,0x00 when you issue a read capacity without
media in the drive.
1998-09-23 03:17:08 +00:00
ken
dafd644ddd Some fixes to the CD driver that may fix PR kern/7996. The data direction
flags on some of the operations in the driver weren't quite right.  Also,
clean up scsi_cd.h, change u_char to u_int8_t.

I'm surprised this problem didn't show up sooner.  (the code has been in
there almost a year and a half)

PR:		        7996
Reviewed by:	        ken
Submitted (mostly) by:	gibbs
1998-09-20 22:48:15 +00:00
gibbs
9b0d027ad3 Don't invalidate devices due to unexpected unit attention errors. In
a perfect world, we'd notice the UA and do some device validation to ensure
that the device hasn't changed.  We may get this before the year ends,
but not before 3.0R.  This change gives the adminstrator ample ammunition
to take off a foot or two, but hey this *is* UN*X.
1998-09-20 07:17:11 +00:00
gibbs
dc569b076a Don't leave the device queue in a frozen state if the Synchronize Cache
command on close fails.
1998-09-19 04:59:35 +00:00
ken
fb53c69912 Fix error recovery in scsi_interpret_sense(). It turns out that ERESTART
wasn't getting sent back for most errors, even if there were retries left
on the command.  I'm not sure how I ever let this slip by before...

In any case, we now send back ERESTART if there are retries left for the
command, and send back the default error code when there are no retries
left.

Reviewed by:	gibbs
1998-09-19 01:23:04 +00:00
ken
b1e2d556fc Fix the CAM code so that people can compile kernels with the CD driver but
without the DA driver.

The problem was that the CD driver depended on scsi_read_write() and
scsi_start_stop(), which were defined in scsi_da.c.

I moved both functions, and their associated data structures and defines
from scsi_da.* to scsi_all.*.  This is technically the "wrong" thing to do
since those commands are really only for direct-access type devices, not
for all SCSI devices.  I think, though, that the advantage (allowing people
to compile kernels without the disk driver) outweighs any architectural
purity arguments.

PR:		kern/7969
Reviewed by:	gibbs
1998-09-18 22:33:59 +00:00
ken
4842598c26 Some Alpha patches for CAM from Doug Rabson.
Reviewed by:	gibbs
Submitted by:	dfr
1998-09-16 23:30:11 +00:00
ken
89e0714ec8 Check to make sure that this device is opened read-write, not just read
only.  Previously, if the device was chmoded 644, someone could open it
with the O_RDONLY flag and issue any ioctl to the device.

Reviewed by:	imp, gibbs
1998-09-16 00:11:53 +00:00
gibbs
77349ff389 Correct printf format bugs. 1998-09-15 22:05:44 +00:00
gibbs
cb986cde46 SCSI Peripheral drivers for CAM:
da	- Direct Access Devices (disks, optical devices, SS disks)
	cd	- CDROM (or devices that can act like them, WORM, CD-RW, etc)
	ch	- Medium Changer devices.
	sa	- Sequential Access Devices (tape drives)
	pass	- Application pass-thru driver
	targ	- Target Mode "Processor Target" Emulator
	pt	- Processor Target Devices (scanners, cpus, etc.)

Submitted by:	The CAM Team
1998-09-15 06:36:34 +00:00