The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.
Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713
the value in a new global intf_mtu for use by the application.
These changes were inspired by the patch provided by Robert Blayzor in
PR 187094, and will allow loader(8) to propagate the value to the kernel
along with the other nfs_diskless parms delivered via environment vars.
wrapped in an i386 ifdef with a comment questioning their usefulness even
there. It turns out they aren't referenced anywhere, but their presence
prevents using sys/endian.h in libstand code.
These days, sys/endian.h provides much better support for such things, using
compiler builtins and inline functions (and creating connections between
libstand code and header files from sys/ would not be breaking new ground).
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Although we don't use it in tree yet libstand is installed as user-
facing /usr/liblibstand.a, and some work in progress makes use of it.
Instead of conflicting with ongoing libstand Makefile deduplication,
just add it now.
libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
relocation fixups unsupported by the self_reloc() code, and don't optimize
memcpy/memset using floating point registers, because in a standalone
environment nothing has initialized the fpu hardware.
variables in loader(8) and other libstand applications.
Sometimes a dhcp server provides incorrect information along with the IP
address. It would be useful to have a way to override this with
locally-supplied information, such as command line parameters passed from a
prior-stage bootloader. This change allows pre-existing env vars to take
precedence over values delivered by the dhcp or bootp server.
The bootp/dhcp code in libstand automatically creates environment variables
from the data provided by the server (dhcp.root-path, dhcp.domain-name,
etc). It also transcribes the values to some global variables such as
'rootpath' and 'hostname'.
This change does two things:
When adding dhcp.* vars to the environment, don't replace existing
vars/values.
When setting the global vars rootpath and hostname, use the
dhcp.root-path and dhcp.host-name env var values if they exist.
This allows the platform-specific part of loader(8) to obtain override
values in some platform-specific way and store them in the environment
before opening the network device. The set of values that can be overriden
is currently limited to just string options. The values that are delivered
as binary data are things that probably shouldn't be overridden (IP,
netmask, gateway, etc).
The original patch this evolved from was submitted by martymac@
PR: 202098
Differential Revision: https://reviews.freebsd.org/D4559
normal libc versions of these functions use asprintf and sscanf, both
of which aren't available in the libstand world. It's easier to
rewrite these than to try to claw those functions into libstand.
Also include uuid_create_nil, since it's safe to include. These were
written from scratch, except for bits of comments that I got from the
libc version, which are acknowledged in the source.
Differential Revision: https://reviews.freebsd.org/D4540
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This should be a non-functional change. A future change should
address the functional differences between these three and converge
on a single source.
Differential Revision: https://reviews.freebsd.org/D2058
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
redzone below the stack pointer for scratch space and requires
interrupt and signal frames to avoid overwriting it. However, EFI uses
the Windows ABI which does not support this. As a result, interrupt
handlers in EFI push their interrupt frames directly on top of the
stack pointer. If the compiler used the red zone in a function in the
EFI loader, then a device interrupt that occurred while that function
was running could trash its local variables. In practice this happens
fairly reliable when using gzipfs as an interrupt during decompression
can trash the local variables in the inflate_table() function
resulting in corrupted output or hangs.
Fix this by disabling the redzone for amd64 EFI binaries. This
requires building not only the loader but any libraries used by the
loader without redzone support.
Thanks to Jilles for pointing me at the redzone once I found the stack
corruption.
Differential Revision: https://reviews.freebsd.org/D2054
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Cisco Systems, Inc.
confusion, the _setjmp.S in libstand was never being used and was instead
being shadowed by the libc version. Since the libc version now uses FPRs,
it caused loader to crash.
in bitfield argument is wrong, as it will be treated as bit 10, causing any
code printing >=10 bits with bit 10 on as having a trailing comma.
Newline (intended one) should be part of the format string (already present
in the examples).
Also fix grammar and kill EOL whitespace in comment while here.
PR: 195005
Approved by: bdrewery
be some kind of problem with the version of makefs used for these disks.
There may be a better way to handle this problem, so I've set the MFC
timer for a fairly long time period.
MFC after: 2 weeks
only happen on every Nth call. Update the existing twiddle() calls done in
various IO loops to roughly reflect the relative IO sizes. That is, tftp
and nfs call twiddle() on every 1K block, ufs on every filesystem block,
so the network calls now use a much larger divisor than disk IO calls.
Also add a new twiddle_divisor() function that allows an application to set
a global divisor that is applied on top of the per-call divisors. Nothing
calls this yet, but loader(8) will be using it to further throttle the
cursor for slow serial consoles.
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
compressed tarball, aka package. The file system assumes that the
files are layed-out in the same order as needed to allow for the
package to be streamed. As such, it does not read an entire package
into memory first.
Some properties of the file system:
o Files that start with '+' are silently skipped. These are found
in FreeBSD package files.
o Files smaller than or equal to 4KB will be cached in memory and
as such allow for some flexibility in accessing files out of
order.
o Files with the .tgz suffix are assumed to be (sub-)packages and
signal the end for a directory scan.
Obtained from: Juniper Networks, Inc.
