Commit Graph

46 Commits

Author SHA1 Message Date
luigi
2afce45ffc Add ipfw hooks to ether_demux() and ether_output_frame().
Ipfw processing of frames at layer 2 can be enabled by the sysctl variable

	net.link.ether.ipfw=1

Consider this feature experimental, because right now, the firewall
is invoked in the places indicated below, and controlled by the
sysctl variables listed on the right.  As a consequence, a packet
can be filtered from 1 to 4 times depending on the path it follows,
which might make a ruleset a bit hard to follow.

I will add an ipfw option to tell if we want a given rule to apply
to ether_demux() and ether_output_frame(), but we have run out of
flags in the struct ip_fw so i need to think a bit on how to implement
this.

		to upper layers
	     |			     |
	     +----------->-----------+
	     ^			     V
	[ip_input]		[ip_output]	net.inet.ip.fw.enable=1
	     |			     |
	     ^			     V
	[ether_demux]      [ether_output_frame]	net.link.ether.ipfw=1
	     |			     |
	     +->- [bdg_forward]-->---+		net.link.ether.bridge_ipfw=1
	     ^			     V
	     |			     |
		 to devices
2002-05-13 10:37:19 +00:00
jhb
3706cd3509 Simple p_ucred -> td_ucred changes to start using the per-thread ucred
reference.
2002-02-27 18:32:23 +00:00
luigi
f565e0a1df MFS: sync the ipfw/dummynet/bridge code with the one recently merged
into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
ps
d0afbb304a Make it so dummynet and bridge can be loaded as modules.
Submitted by:	billf
2001-10-05 05:45:27 +00:00
luigi
0fb106cc3f Two main changes here:
+ implement "limit" rules, which permit to limit the number of sessions
   between certain host pairs (according to masks). These are a special
   type of stateful rules, which might be of interest in some cases.
   See the ipfw manpage for details.

 + merge the list pointers and ipfw rule descriptors in the kernel, so
   the code is smaller, faster and more readable. This patch basically
   consists in replacing "foo->rule->bar" with "rule->bar" all over
   the place.
   I have been willing to do this for ages!

MFC after: 1 week
2001-09-27 23:44:27 +00:00
brooks
b9f9861d89 Include sys/proc.h for the definition of securelevel_ge().
Submitted by:	LINT
2001-09-26 21:53:20 +00:00
rwatson
823d828036 o Modify IPFW and DUMMYNET administrative setsockopt() calls to use
securelevel_gt() to check the securelevel, rather than direct access
  to the securelevel variable.

Obtained from:	TrustedBSD Project
2001-09-26 19:58:29 +00:00
luigi
bc66105b1d Sync with the bridge/dummynet/ipfw code already tested in stable.
In ip_fw.[ch] change a couple of variable and field names to
avoid having types, variables and fields with the same name.
2001-02-10 00:10:18 +00:00
phk
e87f7a15ad Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
luigi
afaf9310f9 MFS: bridge/ipfw/dummynet fixes (bridge.c will be committed separately) 2001-02-02 00:18:00 +00:00
luigi
3366175318 Minor cleanups after yesterday's patch.
The code (bridging and dummynet) actually worked fine!
2001-01-26 19:43:54 +00:00
luigi
8a9237833e Bring dummynet in line with the code that now works in -STABLE.
It compiles, but I cannot test functionality yet.
2001-01-26 06:49:34 +00:00
luigi
2d9565a950 Change critical section protection for dummynet from splnet() to
splimp() -- we need it because dummynet can be invoked by the
bridging code at splimp().

This should cure the pipe "stalls" that several people have been
reporting on -stable while using bridging+dummynet (the problem
would not affect routers using dummynet).
2001-01-22 23:04:13 +00:00
luigi
e09ccfbadf Some dummynet patches that I forgot to commit last summer.
One of them fixes a potential panic when bridging is used and
you run out of mbufs (though i have no idea if the bug has
ever hit anyone).
2001-01-16 23:49:49 +00:00
dwmalone
dd75d1d73b Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
bmilekic
ebe3dfc2d8 Fixup (hopefully) bridging + ipfw + dummynet together...
* Some dummynet code incorrectly handled a malloc()-allocated pseudo-mbuf
  header structure, called "pkt," and could consequently pollute the mbuf
  free list if it was ever passed to m_freem(). The fix involved passing not
  pkt, but essentially pkt->m_next (which is a real mbuf) to the mbuf
  utility routines.

* Also, for dummynet, in bdg_forward(), made the code copy the ethernet header
  back into the mbuf (prepended) because the dummynet code that follows expects
  it to be there but it is, unfortunately for dummynet, passed to bdg_forward
  as a seperate argument.

PRs: kern/19551 ; misc/21534 ; kern/23010
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: bmilekic
Approved by: luigi
2000-11-23 22:25:03 +00:00
luigi
a44e53d698 close PR 19544 - ipfw pipe delete causes panic when no pipes defined
PR: 19544
2000-07-17 20:03:27 +00:00
luigi
021d03f5bf Fix behaviour of "ipfw pipe show" -- previous code gave
ambiguous data to the userland program (kernel operation was
safe, anyways).
2000-06-14 10:07:22 +00:00
luigi
e2bccbe2b7 Implement WF2Q+ in dummynet. 2000-06-08 09:45:23 +00:00
jake
961b97d434 Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
jake
d93fbc9916 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
archie
fa21035b4e Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
luigi
61618b1620 Forgot one line: don't try to match flags when looking for a flow.
Approved-by: jordan
2000-02-11 13:23:14 +00:00
luigi
0a7657b332 Support for stateful (dynamic) ipfw rules. They are very
similar to ipfilter's keep-state.

Look at the updated ipfw(8) manpage for details.

Approved-by: jordan
2000-02-10 14:17:40 +00:00
luigi
b36ea4aac2 Fix a (mostly harmless) scheduling-in-the-past problem with
dummynet (already fixed in -stable, was waiting for Jordan's
approval due to the code freeze).

Reported-By: Mike Tancsa
Approved-By: Jordan
2000-02-04 16:45:33 +00:00
luigi
554cd7f404 Implement per-flow queueing. Using a single pipe config rule,
now you can dynamically create rate-limited queues for different
flows using masks on dst/src IP, port and protocols.
Read the ipfw(8) manpage for details and examples.

Restructure the internals of the traffic shaper to use heaps,
so that it manages efficiently large number of queues.

Fix a bug which was present in the previous versions which could
cause, under certain unfrequent conditions, to send out very large
bursts of traffic.

All in all, this new code is much cleaner than the previous one and
should also perform better.

Work supported by Akamba Corp.
2000-01-08 11:24:46 +00:00
shin
50ba589c66 IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
luigi
12f3e647f6 RTFREE the correct route entry in dummynet_io(). The previous
code failed in handling things like "forward" actions.

Reported-and-tested-by: Jean-Hugues ROYER jhroyer@joher.com
1999-11-26 13:37:09 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
billf
acc990918b Fix a printf() formatter to match its variable.
Reviewed by:	bde, luigi
1999-08-17 22:10:00 +00:00
luigi
fa3e4896b3 Add spl() protection to remove that the timer is invoked multiple
times resulting in higher bandwidth and lower delays.
Reported-by: Jamshid Madhavi
1999-08-11 14:37:58 +00:00
peter
28b30d72a3 Fix two warnings; and note a problem where a pointer is stored in an
int variable - this can't work on an Alpha.
1999-05-06 22:08:57 +00:00
luigi
2085d1a050 Free the dummynet descriptor in ip_dummynet, not in the called
routines. The descriptor contains parameters which could be used
within those routines (eg. ip_output() ).

On passing, add IPPROTO_PGM entry to netinet/in.h
1999-05-04 16:20:33 +00:00
luigi
61851a14d7 assorted dummynet cleanup:
+ plug an mbuf leak when dummynet used with bridging
 + make prototype of dummynet_io consistent with usage
 + code cleanup so that now bandwidth regulation is precise to the
   bit/s and not to (8*HZ) bit/s as before.
1999-05-04 07:30:08 +00:00
peter
f9bc841320 Tidy up some stray / unused stuff in the IPFW package and friends.
- unifdef -DCOMPAT_IPFW  (this was on by default already)
- remove traces of in-kernel ip_nat package, it was never committed.
- Make IPFW and DUMMYNET initialize themselves rather than depend on
  compiled-in hooks in ip_init().  This means they initialize the same
  way both in-kernel and as kld modules.  (IPFW initializes now :-)
1999-04-20 13:32:06 +00:00
peter
8dc2affd00 Convert the dummynet lkm code to be kld aware (this isn't actually used
anywhere that I can see).
1999-04-17 11:09:08 +00:00
luigi
bb2e8627df Use the correct length from the mbuf header instead of the one from
the IP header (this would not work for bridged packets).
This has been fixed long ago in the 2.2 branch.

Problem noticed by: a few people
Fix suggested by: Remy Nonnenmacher
1999-03-26 14:15:59 +00:00
luigi
2e53da61af add missing #include "opt_bdg.h" 1999-03-24 12:43:39 +00:00
dillon
dbf5cd2b57 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-27 22:42:27 +00:00
eivind
8a19f89957 ... _and_ the (void*) casts for %p. Next, I'll forget my own name :-( 1999-01-12 16:43:52 +00:00
eivind
5eadf1333f Avoid unnecessary GCCism - I hadn't noticed the __unused macro. 1999-01-12 16:40:57 +00:00
eivind
cf51804cbf * Print pointers using the correct type (%p) instead of %x.
* Use the correct type for timeout function.
* Add missing #include.
1999-01-12 12:27:54 +00:00
luigi
4d0780a914 Add a missing bzero which could be the source of instability
problems reported recently (the rtentry pointer in the dummynet
queue was not initialized in all cases, resulting in spurious
rt_refcnt decreases in the lucky cases, and memory trashing in
other cases.
1999-01-11 11:08:07 +00:00
luigi
d3efa9889b Remove some unused variables. 1998-12-31 07:35:49 +00:00
luigi
4b628fa86d Last bits (i think) of dummynet for -current. 1998-12-14 18:09:13 +00:00
luigi
d45d8a3cde Bring in new files for dummynet support 1998-09-12 22:03:21 +00:00