Commit Graph

74 Commits

Author SHA1 Message Date
miwi
6b1edbda3b - Add support for MosChip 9865 Single 1284 Printer port
PR:		kern/152663
Submitted by:	Jonathan Chen <jonc@chen.org.nz>
Approved by:	rwatson (mentor)
2011-02-19 17:38:51 +00:00
delphij
a2fd4d4bb7 Add PCI ID for MCS9901's parallel port.
PR:		kern/144713
Submitted by:	gcooper
MFC after:	2 weeks
2010-03-23 20:08:18 +00:00
kaiw
ed3597a696 Added entries for Lava SP-PCI (1 serial + 1 parallel) PCI card. The
card is a multifunction PCI and report itself as two logical devices.
2009-02-11 00:08:03 +00:00
imp
10f81d10bb reset_epp and ecp_sync both return int. 2009-02-05 19:31:55 +00:00
jhb
879505d4df Add locking to ppc and ppbus and mark the whole lot MPSAFE:
- To avoid having a bunch of locks that end up always getting acquired as
  a group, give each ppc(4) device a mutex which it shares with all the
  child devices including ppbus(4), lpt(4), plip(4), etc.  This mutex
  is then used for all the locking.
- Rework the interrupt handling stuff yet again.  Now ppbus drivers setup
  their interrupt handler during attach and tear it down during detach
  like most other drivers.  ppbus(4) only invokes the interrupt handler
  of the device that currently owns the bus (if any) when an interrupt
  occurs, however.  Also, interrupt handlers in general now accept their
  softc pointers as their argument rather than the device_t.  Another
  feature of the ppbus interrupt handlers is that they are called with
  the parent ppc device's lock already held.  This minimizes the number
  of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
  - Add a mutex to protect the global tables in plip(4) and free them on
    module unload.
  - Add a detach routine.
  - Split out the init/stop code from the ioctl routine into separate
    functions.
- Other lpt(4) changes:
  - Use device_printf().
  - Use a dedicated callout for the lptout timer.
  - Allocate the I/O buffers at attach and detach rather than during
    open and close as this simplifies the locking at the cost of
    1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
  - Use an sx lock to serialize open and close.
  - Remove unused HADBUS flag.
  - Add a detach routine.
  - Use a malloc'd buffer for each read and write to avoid races with
    concurrent read/write.
- Other pps(4) changes:
  - Use a callout rather than a callout handle with timeout().
  - Conform to the new ppbus requirements (regular mutex, non-filter
    interrupt handler).  pps(4) is probably going to have to become a
    standalone driver that doesn't use ppbus(4) to satisfy it's
    requirements for low latency as a result.
  - Use an sx lock to serialize open and close.
- Other vpo(4) changes:
  - Use the parent ppc device's lock to create the CAM sim instead of
    Giant.
- Other ppc(4) changes:
  - Fix ppc_isa's detach method to detach instead of calling attach.

Tested by:	  no one :-(
2009-01-21 23:10:06 +00:00
jhb
51d2cc2053 Various whitespace and style fixes. 2008-11-16 17:42:02 +00:00
jhb
bd95a98949 Fix build with PPC_PROBE_CHIPSET enabled. 2008-10-22 19:39:16 +00:00
jhb
03f7a1b892 Several cleanups to remove the need for explicit unit numbers and a few
other fixes:
- Add pointers back to device_t objects in softc structures instead
  of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
  instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
  pulling the unit number from the minor number and using
  devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
  number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
  ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
  from the parent anyway.
- Try to detach all the child devices before deleting them in
  ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
  ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
  numbers.

Silence on:	current@
2008-10-21 18:30:10 +00:00
jhb
c0edaf988a Rework the handling of interrupt handlers for children of ppc and ppbus:
- Retire IVARs for passing IRQs around.  Instead, ppbus and ppc now allow
  child devices to access the interrupt by via a rid 0 IRQ resource
  using bus_alloc_resource_any().
- ppc creates its own interrupt event to manage the interrupt handlers of
  child devices.  ppc does not allow child devices to use filters.  It
  could allow this if needed, but none of the current drivers use them
  and it adds a good bit of complication.  It uses
  intr_event_execute_handlers() to fire the child device interrupt handlers
  from its threaded interrupt handler.
- Remove the ppbus_dummy_intr() hack.  Now the ppc device always has an
  interrupt handler registered and we no longer bounce all the way up to
  nexus to manage adding/removing ppbus child interrupt handlers.  Instead,
  the child handlers are added and removed to the private interrupt event
  in the ppc device.
2008-09-15 22:26:32 +00:00
nyan
ab24857127 Remove unneeded include. 2008-08-29 12:23:51 +00:00
jhb
8673c8e078 Use bus_foo() rather than bus_space_foo() and remove bus handle and tag
from softc.
2008-08-22 18:43:19 +00:00
jhb
127a7b412c Use ppc_detach() for device_detach instead of ppc_attach().
MFC after:	1 week
2008-08-22 18:42:45 +00:00
nyan
3f9dd9edcb Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource().  This is needed for pc98 by upcoming nexus related
change.
2007-03-21 03:38:37 +00:00
piso
3770ad6ae9 o Wrap ppc_setup_intr() at 80.
o Fix a bit the indentation.
2007-03-06 11:36:33 +00:00
jhb
eeae7be803 Whitespace fix. 2007-02-23 23:05:31 +00:00
jhb
e21fb2b555 Use 'pause' in several places rather than trying to tsleep() on NULL (which
triggers a KASSERT) or local variables.  In the case of kern_ndis, the
tsleep() actually used a common sleep address (curproc) making it
susceptible to a premature wakeup.
2007-02-23 16:25:08 +00:00
piso
6a2ffa86e5 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
jhb
0f921e0992 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
marcel
193a6144b9 Rewrite of puc(4). Significant changes are:
o  Properly use rman(9) to manage resources. This eliminates the
   need to puc-specific hacks to rman. It also allows devinfo(8)
   to be used to find out the specific assignment of resources to
   serial/parallel ports.
o  Compress the PCI device "database" by optimizing for the common
   case and to use a procedural interface to handle the exceptions.
   The procedural interface also generalizes the need to setup the
   hardware (program chipsets, program clock frequencies).
o  Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
   default and non-serdev devices are handled by the bus.
o  Use the serdev I/F to collect interrupt status and to handle
   interrupts across ports in priority order.
o  Sync the PCI device configuration to include devices found in
   NetBSD and not yet merged to FreeBSD.
o  Add support for Quatech 2, 4 and 8 port UARTs.
o  Add support for a couple dozen Timedia serial cards as found
   in Linux.
2006-04-28 21:21:53 +00:00
marcel
6f4efe32b4 o Use __FBSDID
o  Whitespace fixes
o  Non-K&R functions
2006-04-26 21:25:13 +00:00
marcel
deb16135f3 o Move ISA specific code from ppc.c to ppc_isa.c -- a bus front-
end for isa(4).
o  Add a seperate bus frontend for acpi(4) and allow ISA DMA for
   it when ISA is configured in the kernel. This allows acpi(4)
   attachments in non-ISA configurations, as is possible for ia64.
o  Add a seperate bus frontend for pci(4) and detect known single
   port parallel cards.
o  Merge PC98 specific changes under pc98/cbus into the MI driver.
   The changes are minor enough for conditional compilation and
   in this form invites better abstraction.
o  Have ppc(4) usabled on all platforms, now that ISA specifics
   are untangled enough.
2006-04-24 23:31:51 +00:00
iwasaki
0613b693d0 Import ACPI Dock Station support. Note that this is still very young.
Additional detach implementaions (or maybe improvement) for other
deivce drivers is required.

Reviewed by:	njl, imp
MFC after:	1 week
2006-04-15 12:31:34 +00:00
jhb
c4fac66722 G/C unused variable. 2006-02-22 21:47:04 +00:00
jhb
4793b3db38 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
ru
d808b4fd31 Add missing MODULE_DEPEND() so that ppbus.ko and these .ko's can be
loaded dynamically.
2005-12-21 10:54:47 +00:00
ru
522e9c2b7b Fix -Wundef. 2005-12-04 02:12:43 +00:00
imp
60ff5c6430 don't use C keyword register as CPP macro argument name 2005-04-12 23:32:26 +00:00
imp
4b319958e7 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
phk
9d102d7d5a Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
ambrisko
e8f9952165 Forgot an added file in the last commit. 2003-08-01 05:02:55 +00:00
ambrisko
a1fbadfb8d Add printer support to puc(4) driver.
-	Move isa/ppc* to sys/dev/ppc (repo-copy)
      -	Add an attachment method to ppc for puc
      -	In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms.  Testers
wanted.

PR:		38372 (in spirit done differently)
Verified by:	Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00
obrien
a63f21d732 Use __FBSDID(). 2003-06-11 00:34:37 +00:00
phk
e01d5a0a97 Remove break after return;
Found by:       FlexeLint
2003-05-31 20:24:30 +00:00
markm
6cc289554b Fix some easy, global, lint warnings. In most cases, this means
making some local variables static. In a couple of cases, this means
removing an unused variable.
2003-04-30 12:57:40 +00:00
des
2756b6c964 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
nsouch
22ddd5d3ab Restore the original copyright 2002-03-23 15:36:13 +00:00
obrien
7fd9a6a23a Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
msmith
d52fd88ca3 Add ACPI attachments. 2001-08-30 09:17:03 +00:00
nsouch
55113b084f Convert inb/outb to bus_space.
Submitted by:	jcm@FreeBSD-uk.eu.org
2001-06-23 06:52:54 +00:00
nsouch
fe01c653ba Consider that the chipset may be in ECP mode (from BIOS settings)
even if mode PS/2 is forced with bootflags. As a matter of fact,
chipsets needs some extra configuration for accessing PS/2 mode
from ECP. The current patch is only relevant for generic chipsets
since specific code is supposed to deal with this during detection.
2001-01-25 10:51:41 +00:00
nsouch
9d3d001a03 Fix the PR. Getting a dma channel equal to 0 remains a problem though.
PR:		i386/22568
2000-12-19 21:28:17 +00:00
dfr
c97376dfd4 Add support for the PC87303 chipset (found on Miata alphas) and add
support for relocating the port address if the isa hints specify a
different address from the address the chipset currently has.

Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-07-20 09:28:07 +00:00
dfr
5aef58d7b9 Add smc37c935 chipset support and clean up the code which tries to
allocate a short port range in some alpha configurations.

Submitted by: "Andrew M. Miklic" <miklic@udlkern.fc.hp.com>,
	      Mark Abene <phiber@radicalmedia.com>
2000-07-18 09:01:09 +00:00
dfr
ef12e65e9a Only print the diagnostic about extended I/O ports if bootverbose is true. 2000-06-25 09:20:56 +00:00
dfr
503e2bb45e Port ppc driver to alpha.
Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-05-14 13:47:57 +00:00
wollman
494d7321f0 Enable PnP attachment for parallel port controllers.
PR:		17495
2000-04-22 15:08:50 +00:00
peter
1a453ea9ce Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is
'optional ppc' in conf/files*
2000-01-29 14:02:30 +00:00
dfr
7fef19bf38 * Don't use ivars to access resources, bus_set/get_resource is much better.
* First approximation of making this work on alpha (not working yet).
2000-01-25 22:21:45 +00:00
peter
2196bee6e9 Don't do device_set_desc() until after checking for PnP probes. Otherwise
things like sound cards can get called "Parallel port".  A note to the
unwary; the isa-pnp devices in the system are probed like PCI - each
device ID is passed to *all* isa probe routines to find the best match.
If the driver is not prepared to deal with this, it must abort in this
scenario or it will try and claim all PnP devices.
2000-01-14 05:03:23 +00:00