Merge the ZFS I/O deadman thread from vendor (illumos).
This feature panics the system on hanging ZFS I/O, helps debugging
and resumes failed service.
The panic behavior can be controlled with the loader-only tunables:
vfs.zfs.deadman_enabled (enable or disable panic on stalled ZFS I/O)
vfs.zfs.deadman_synctime (expiration time for stalled ZFS I/O)
By default, ZFS I/O deadman is enabled by default on amd64 and i386
excluding virtual guest machines.
Illumos ZFS issues:
3246 ZFS I/O deadman thread
References:
https://www.illumos.org/issues/3246
MFC after: 2 weeks
kernel. Properly restore, continue, and detach from processes
being DTraced when DTrace exits with an error so the program
being inspected is not terminated.
cddl/contrib/opensolaris/cmd/dtrace/dtrace.c:
In fatal(), the generic error handler, close the DTrace
handle as is done in the "probe/script" error handler
dfatal(). fatal() can be invoked after DTrace attaches
to processes (e.g. a script specified by command line
argument can't be found) and closing the handle will
release them.
Submitted by: Spectra Logic Corporation
Reviewed by: rpaulo, gnn
* Illumos zfs issue #3035 [1] LZ4 compression support in ZFS.
LZ4 is a new high-speed BSD-licensed compression algorithm created
by Yann Collet that delivers very high compression and decompression
performance compared to lzjb (>50% faster on compression, >80% faster
on decompression and around 3x faster on compression of incompressible
data), while giving better compression ratio [1].
This version of LZ4 corresponds to upstream's [2] revision 85.
Please note that for obvious reasons this is not backward read
compatible. This means once a pool have LZ4 compressed data, these
data can no longer be read by older ZFS implementations.
Local changes:
- On-stack hash table disabled and using kernel slab allocator
instead, at this time. This requires larger kernel thread stack
for zio workers. This may change in the future should we adjusted
the zio workers' thread stack size.
- likely and unlikely will be undefined if they are already defined,
this is required for i386 XEN build.
- Removed De Bruijn sequence based __builtin_ctz family of builtins
in favor of the latter. Both GCC and clang supports these builtins.
- Changed the way the LZ4 code detects endianness.
- Manual pages modifications to mention the feature based on Illumos
counterpart.
- Boot loader changes to make it support LZ4 decompression.
[1] https://www.illumos.org/issues/3035
[2] http://code.google.com/p/lz4/source/list
Obtained from: Illumos (13921:9d721847e469)
Tested on: FreeBSD/amd64
MFC after: 1 month
of files other than the actual libraries.
Use LIBRARIES_ONLY to supress the inclusion of files in the lib32
distribution that are duplicates of files in base.
Sponsored by: DARPA, AFRL
Reviewed by: emaste
the underlying zap_count() to return no errors. However, it is possible
that the pool reaches to such a state where zap_count would return error,
leading to panics when a pool is imported.
This commit changes the ddt_zap_count to return error returned from
zap_count and handle the error appropriately. With this change, it's now
possible to let zpool rollback damaged transaction groups and import the
pool.
Obtained from: ZFS on Linux github (e8fd45a0f975c6b8ae8cd644714fc21f14fac2bf)
MFC after: 1 month
random order instead of creation order.
Eliminates needless filesystem renames caused by removed parent snapshots
which subsequently causes many more errors.
PR: kern/172259
Submitted by: Steven Hartland
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
MFC after: 2 weeks
Introduce a new dataset aclmode setting "restricted" to protect ACL's
being destroyed or corrupted by a drive-by chmod.
illumos-gate 13889:a67716f16746
3254 add support in zfs for aclmode=restricted
References:
https://www.illumos.org/issues/3254
MFC after: 2 weeks
Import the zio nop-write improvement from Illumos. To reduce I/O,
nop-write omits overwriting data if the checksum (cryptographically
secure) of new data matches the checksum of existing data.
It also saves space if snapshots are in use.
It currently works only on datasets with enabled compression, disabled
deduplication and sha256 checksums.
IllumOS 13887:196932ec9e6a and 13888:7204b3392a58
3236 zio nop-write
References:
https://www.illumos.org/issues/3236
MFC after: 2 weeks
Illumos 13886:e3261d03efbf
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
References:
https://www.illumos.org/issues/3349
MFC after: 1 week
Illumos r13840:97fd5cdf328a:
3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()
Illumos r13849:3468a95b27cd:
3258 ztest's use of file descriptors is unstable
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
MFC after: 2 weeks
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> Security: Vulnerability reference (one per line) or description.
> Empty fields above will be automatically removed.
M zpool_main.c
impatient if we sent more than 2 INT signals. This fixes a bug where
we wouldn't see aggregations print on the command line if we Ctrl-C'd
a dtrace script or command line invocation.
MFC after: 2 weeks
Merge changes from illumos
906 dtrace depends_on pragma should search all library paths, not just the
current one
949 dtrace should only include the first instance of a library found on
its library path
Illumos Revisions: 13353:936a1e45726c
13354:2b2c36a81512
Reference:
https://www.illumos.org/issues/906https://www.illumos.org/issues/949
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 3 weeks
These probes are most useful when looking into the structures
they provide, which are listed in io.d. For example:
dtrace -n 'io:genunix::start { printf("%d\n", args[0]->bio_bcount); }'
Note that the I/O systems in FreeBSD and Solaris/Illumos are sufficiently
different that there is not a 1:1 mapping from scripts that work
with one to the other.
MFC after: 1 month
Bryan Cantrill implemented the equivalent of semi-log graph
paper for Dtrace so llquantize will use one logarithmic and
one linear scale.
Special thanks to Mark Peek for providing fix to an
assertion and to Fabian Keill for testing the port.
Illumos Revision: 13355:15b74a2a9a9d
Reference:
https://www.illumos/issues/905
Obtained from: Illumos
Tested by: Fabian Keill, mp
MFC after: 4 days
1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v".
The added expandsize property has currently no value on FreeBSD.
This changeset allows adding expansion support to individual vdevs
in the future.
References:
https://www.illumos.org/issues/1948
Obtained from: illumos (issue #1948)
MFC after: 2 weeks
2703 add mechanism to report ZFS send progress
If the zfs send command is used with the -v flag, the amount of bytes
transmitted is reported in per second updates.
References:
https://www.illumos.org/issues/2703
Obtained from: illumos (issue #2703)
MFC after: 2 weeks
in the system-wide version of <stdlib.h> by wrapping the #include_next
<stdlib.h> within the scope of its own header protection. On FreeBSD this has
no effect, since both header protections are equivalent. However the GNU version
of <stdlib.h> implements a special header protection mechanism which allows it
to be included multiple times (in different modes).
Simply by moving the #include_next off the header protection, we allow
system-wide <stdlib.h> to implement its own protection policy, whichever that
may be.
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
