to check the status property in their probe routines.
Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352. Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.
Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
Add an option ATSE_CFI_HACK to allow memory mapped CFI devices to have
their address range allocated sharable so that atse(4) can find it's
Ethernet address in the expected location.
We intend to remove this hack once the BERI platform has a loader.
Rework the timeout code to use actual time rather than a DELAY() loop and
to use both typical and maximum to allow logging of timeout failures.
Also correct the erase timeout, it is specified in milliseconds not
microseconds like the other timeouts. Do not invoke DELAY() between
status queries as this adds significant latency which in turn reduced
write performance substantially.
Sanity check timeout values from the hardware.
Implement support for buffered writes (only enabled on Intel/Sharp parts
for now). This yields an order of magnitude speedup on the 64MB Intel
StrataFlash parts we use.
When making a copy of the block to modify, also keep a clean copy around
until we are ready to commit the block and use it to avoid unnecessary
erases. In the non-buffer write case, also use it to avoid
unnecessary writes when the block has not been erased. This yields a
significant speedup when doing things like zeroing a block.
Sponsored by: DARPA, AFRL
Reviewed by: imp (previous version)
d_getattr(). Since these drivers use disk(9) KPI and not directly GEOM, use
of that function means KPI layering violation, causing extra g_io_deliver()
call for the request.
Intel and Sharp flash power on with their blocks in a "locked" state.
Unlocked them before attempting to perform an erase or write action and
relock when the action is complete.
Add a simplebus attachment for cfi(4)'s FDT support and move
cfi_bus_fdt.c to sys/conf/files so non-ppc architectures are supported.
Sponsored by: DARPA, AFRL
The flash commands and responses are little-endian and have to be
byte swapped on big-endian systems. However the raw read of data
need not be swapped.
Make the cfi_read and cfi_write do the swapping, and provide a
cfi_read_raw which does not byte swap for reading data from
flash.
Rewrite atomic operations for powerpc in order to achieve the following:
- Produce a type-clean implementation (in terms of functions arguments
and returned values) for the primitives.
- Fix errors with _long() atomics where they ended up with the wrong
arguments to be accepted.
- Follow the sys/type.h specifics that define the numbered types starting
from standard C types.
- Let _ptr() version to not auto-magically cast arguments, but leave
the burden on callers, as _ptr() atomic is intended to be used
relatively rarely.
Fix cfi in order to support the latest point.
In collabouration with: bde
Tested by: andreast, nwhitehorn, jceel
MFC after: 2 weeks
The following systems are affected:
- MPC8555CDS
- MPC8572DS
This overhaul covers the following major changes:
- All integrated peripherals drivers for Freescale MPC85XX SoC, which are
currently in the FreeBSD source tree are reworked and adjusted so they
derive config data out of the device tree blob (instead of hard coded /
tabelarized values).
- This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
QUICC, UART, CFI.
- Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
ocpbus(4) driver, which was based on hard-coded config data.
Note that world for these platforms has to be built WITH_FDT.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
this fixes geom_redboot on boards that have multiple parts/regions as it
uses the value to locate the FIS directory which is in the last erase
region of flash
o add CFI_SUPPORT_STRATAFLASH compile option to enable support
o add new ioctls to get/set the factory and user/oem segments of the PR
and to get/set Protection Lock Register that fuses the user segment
o add #defines for bits in the status register
o update cfi_wait_ready to take an offset so it can be used to wait for
PR write completion and replace constants w/ symbolic names
Note: writing the user segment isn't correct; committing now to get review.
Sponsored by: Carlson Wireless
Reviewed by: imp, Chris Anderson
Memory Interface (CFI). The flash memory can be read and written
to through /dev/cfi# and an ioctl() exists so processes can read
the query information.
The driver supports the AMD and Intel command set, though only
the AMD command has been tested.
Obtained from: Juniper Networks, Inc.
