When exchanging CM messages the IPv6 scope ID should be ignored
for link local addresses when doing comparisons. Make sure the
scope ID is always set to zero for link local addresses.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It is not enough to cancel delayed work structures before freeing.
Always cancel delayed work synchronously before freeing!
MFC after: 1 week
Sponsored by: Mellanox Technologies
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.
It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.
This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.
This commit combines the following Linux upstream commits:
IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch ensures the GID index is always used as a basis of resolving
incoming RDMA connections, as compared to the GID value itself.
Background:
On a per infiniband port basis, the GID identifier is not a unique identifier!
This assumption falls apart when VLAN ID, IPv6 scope ID and RoCE type,
as supported by RoCE v2, is taken into account. This additional
information is stored in the so-called GID attributes and is needed to
correctly identify the destination network interface for an incoming
connection.
Different VLANs are allowed to define the same IPv4 addresses and especially
for the default IPv6 link-local addresses or when using so-called containers
or jails, this is true.
The VNET information for the destination network interface is needed in
order to perform the L2 address lookup in the right Virtual Network Stack
context.
Consequently old functions previously used by RoCE v1, like
rdma_addr_find_smac_by_sgid() are impossible to support, because
there can be multiple identical GIDs associated with the same
infiniband port, and the answer to such a request becomes undefined.
This function has been removed.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Implement the missing pieces in addr_resolve() to support loopback
addresses. IB core will test for the IFF_LOOPBACK flag in the network
interface and treat these devices in a special way.
MFC after: 1 week
Sponsored by: Mellanox Technologies
When a network device is departing, the RoCE GID entries should be
cleared before the default L2 link layer address is freed. Else a NULL
pointer access may happen.
MFC after: 1 week
Sponsored by: Mellanox Technologies
VLANs in ibcore.
IPv6 link local addresses are usually derived from the netdev MAC
address. This is applicable to VLAN devices and its lower netdevice as
well. In such cases the IPv6 link local address is a duplicate of the
default GID.
Now that link local IPv6 addresses based GIDs are supported, allow
adding such GID entries in the GID table.
MFC after: 1 week
Sponsored by: Mellanox Technologies
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Different compilers may optimise the enum type in different ways. This ensures
coherency when range checking the value of enums in ibcore.
Sponsored by: Mellanox Technologies
MFC after: 1 week
variable. Access the variable directly instead of going through the sysctl()
interface in the kernel.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Set the IPOIB_FLAG_INITIALIZED on dev_open and clear it on dev_stop to
avoid a race between ipoib load and the underlying device driver.
The device module must dispatch the IB_EVENT_PORT_ACTIVE event before ipoib
module is loaded. Otherwise, the flush will fail since no one set the
IPOIB_FLAG_INITIALIZED.
Submitted by: Slava Shwartsman <slavash@mellanox.com>
Sponsored by: Mellanox Technologies
MFC after: 1 week
Else the IPv6 address matching might fail. This change adds support for both
embedded and non-embedded IPv6 scope IDs when passing a IPv6 link-local socket
address to RDMA. Prior to this change only global IPv6 addresses would work
with RDMA.
Sponsored by: Mellanox Technologies
MFC after: 1 week
1) Fail to resolve RDMA address if rtalloc1() returns the loopback
device, lo0, as the gateway interface. Currently RDMA loopback is
not supported.
2) Use ip_dev_find() and ip6_dev_find() to lookup network interfaces
with matching IPv4 and IPv6 addresses, respectivly.
3) In addr_resolve() make sure the "ifa" pointer is always set, also when
the "ifp" is NULL. Else a NULL pointer access might happen trying to
read from the "ifa" pointer later on.
4) In rdma_addr_find_dmac_by_grh() make sure the "bound_dev_if" field
gets set properly instead of passing the scope ID through the IPv6
socket address structure. This is more in line with upstream OFED
in Linux.
5) In rdma_addr_find_smac_by_sgid() there is no need to pass the
scope ID for IPv6. Either it is stored in the "bound_dev_if" field
or ip6_dev_find() will find the correct network device regardless
of the scope ID.
Sponsored by: Mellanox Technologies
MFC after: 1 week
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore
Reviewed by: np @
Differential Revision: https://reviews.freebsd.org/D12563
Sponsored by: Mellanox Technologies
MFC after: 3 days
- Add more sanity checks.
- Preserve source port number when resolving address.
- Remove no longer needed scope ID hacks for IPv6.
Sponsored by: Mellanox Technologies
This patch fixes an interopability issue between FreeBSD and non-FreeBSD
systems when the connection establishment is aborted. Refer to the
initial commit in Linux, drivers/infiniband/core/cm.c,
for a more detailed description.
Obtained from: Linux
MFC after: 3 days
Sponsored by: Mellanox Technologies
