ratectl_node_init() functions and since ni_rtctls was already
malloc'ed() we will panic. Fix this by using the already malloc'ed
pointer.
Found by: bschmidt
Reviewed by: bschmidt
a revert call. In this case don't attempt to remove something that
has not yet been added. Otherwise this jaddref must hang around
to prevent the bitmap write as normal.
the page table entry's accessed bit is either preset by the immediately
preceding call to pmap_enter() or by hardware (or software) upon return
from vm_fault() when the faulting access is restarted.
or unmanaged before acquiring the page queues lock. Neither of these
tests require that lock. Moreover, a better way of testing if the page
is unmanaged is to test the type of vm object. This avoids a pointless
vm_page_lookup().
MFC after: 3 weeks
Open Firmware device tree in order to match what the PROM built-in
driver uses. This is especially important when netbooting Fujitsu
Siemens PRIMEPOWER250 as in that case the built-in driver isn't used
and the port facts PortSCSIID defaults to 0, conflicting with the
disk at the same address.
Add missing CURVNET_RESTORE() calls for multiple code paths, to stop
leaking the currently cached vnet into callers and to the process.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 4 days
that we allow all possible jail IPs as source address rather than
forcing the "primary". While IPv6 naturally has source address
selection, for legacy IP we do not go through the pain in case
IP_HDRINCL was not set. People should bind(2) for that.
This will, for example, allow ping(|6) -S to work correctly for
non-primary addresses.
Reported by: (ten 211.ru)
Tested by: (ten 211.ru)
MFC after: 4 days
addresses while walking the IPv6 address list if in the jail case
something is connecting to ::1.
Reported by: Pieter de Boer (pieter thedarkside.nl)
Tested by: Pieter de Boer (pieter thedarkside.nl)
MFC after: 4 days
by mrinfo and mtrace, was dropped by the IGMP TTL check. IGMP control
traffic must always have a TTL of 1.
Submitted by: Matthew Luckie
MFC after: 3 days
Clearing a page table entry's accessed bit (PG_A) and setting the
page's PG_REFERENCED flag in pmap_protect() can't really be justified,
so don't do it.
first descriptor in TSO case. Otherwise controller can generate bad
frames during TSO. To address it, make sure to pull up ethernet +
IP + TCP header with options in first buffer. Also ensure the
buffer length of the first descriptor for TSO covers entire ethernet
+ IP + TCP with options and setup additional Tx descriptor if the
first buffer includes TCP payload.
Tested by: Amar Takhar <verm <> darkbeer dot org >
MFC after: 1 week
prevents the firmware of Fujitsu Siemens PRIMEPOWER250, which both causes
stray interrupts and erroneously enables interrupts at least when calling
SUNW,set-trap-table, in the foot.
things allows variable length messages to be easily supported.
- Extend KPI with alq_writen() and alq_getn() to support variable length
messages, which is enabled at ALQ creation time depending on the
arguments passed to alq_open(). Also add variants of alq_open() and
alq_post() that accept a flags argument. The KPI is still fully
backwards compatible and shouldn't require any change in ALQ consumers
unless they wish to utilise the new features.
- Introduce the ALQ_NOACTIVATE and ALQ_ORDERED flags to allow ALQ consumers
to have more control over IO scheduling and resource acquisition
respectively.
- Strengthen invariants checking.
- Document ALQ changes in ALQ(9) man page.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jeff, rpaulo, rwatson
MFC after: 1 month
- replace modification of pmap resident_count with pmap_resident_count_{inc,dec}
- the pv list is protected by the pmap lock, but in several cases we are relying
on the vm page queue mutex, move pv_va read under the pmap lock
page's PG_REFERENCED flag in pmap_protect() can't really be justified.
In contrast to pmap_remove() or pmap_remove_all(), the mapping is not
being destroyed, so the notion that the page was accessed is not lost.
Moreover, clearing the page table entry's accessed bit and setting the
page's PG_REFERENCED flag can throw off the page daemon's activity
count calculation. Finally, in my tests, I found that 15% of the
atomic memory operations being performed by pmap_protect() were only
to clear PG_A, and not change protection. This could, by itself, be
fixed, but I don't see the point given the above argument.
Remove a comment from pmap_protect_pde() that is no longer meaningful
after the above change.
bd_compat32 field of struct bpf_d is kept unconditionally to not
impose the requirement of including "opt_compat.h" on all numerous
users of bpfdesc.h.
Submitted by: jhb (version for 6.x)
Reviewed and tested by: emaste
MFC after: 2 weeks
do not constitute user-visible or active partitions and as such should
not prevent undoing pending operations.
While here, initialize the last usable sector for the placeholder geom
based on the null scheme, created to allow undoing the destruction of
a scheme. This gives consistent output with "gpart show".
Based on a patch from: "Andrey V. Elsukov" <bu7cher@yandex.ru>
during the grace period after startup. This grace period must
be at least the lease duration, which is typically 1-2 minutes.
It seems prudent for the experimental NFS client to wait a few
seconds before retrying such an RPC, so that the server isn't
flooded with non-recovery RPCs during recovery. This patch adds
an argument to nfs_catnap() to implement a 5 second delay
for this case.
MFC after: 1 week
pmap_ts_referenced() is not always appropriate for checking whether or
not pages have been referenced because it clears any reference bits
that it encounters. For example, in mincore(), clearing the reference
bits has two negative consequences. First, it throws off the activity
count calculations performed by the page daemon. Specifically, a page
on which mincore() has called pmap_ts_referenced() looks less active
to the page daemon than it should. Consequently, the page could be
deactivated prematurely by the page daemon. Arguably, this problem
could be fixed by having mincore() duplicate the activity count
calculation on the page. However, there is a second problem for which
that is not a solution. In order to clear a reference on a 4KB page,
it may be necessary to demote a 2/4MB page mapping. Thus, a mincore()
by one process can have the side effect of demoting a superpage
mapping within another process!
brings in support for an optional intent log which eliminates the need
for background fsck on unclean shutdown.
Sponsored by: iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
physical addresses.
o) Set a local maxmem in sb_machdep.c to avoid trying to use pages over 2^64
under 32-bit ABIs. Our pmap needs corrected to use vm_paddr_t consistently,
then we can make vm_paddr_t 64-bit under 32-bit ABIs and add code in pmap
to limit phys_avail by the maximum PFN that a 32-bit PTE can hold.
Some of these cases should be safe in a non-atomic fashion, however
since all of the driver ioctls are locked, a lot of work is required to
fix it correctly. Just don't sleep now.
MFC after: 2 weeks
* Fix delaying of SACK by taking out old optimization code
which does not optimize anymore.
* Fix fast retransmission of chunks abandoned by the
"number of retransmissions" policy.
MFC after: 3 days.
with delegations enabled, the recovery could fail if the renew
thread is trying to return a delegation, since it will not do the
recovery. This patch fixes the above by having nfscl_recalldeleg()
fail with the I/O operations returning EIO, so that they will be
attempted later. Most of the patch consists of adding an argument
to various functions to indicate the delegation recall case where
this needs to be done.
MFC after: 1 week
was chosen by lots of trial and errors. The chosen value shows
good interrupt moderation without additional latency.
Without this change, controller can generate more than 140k
interrupts per second under high network load.
Submitted by: xclin <xclin <> cs dot nctu dot edu dot tw >
This time, abandon the use of busdma and start interacting with the VM
system directly. Make use of the new kmem_alloc_attr() which allows us
to easily allocate non-contiguous pages to back the GART table. This
should help a lot when starting or restarting X after the system has
been running for a while and memory has become fragmented.
MFC after: 2 weeks
* On 32 bit platforms we steal the upper 4 bits of the map handle
to store a unique map id.
* On 64 bit platforms we steal the upper 24 bits.
Resolves issues where the offsets that are handed to mmap may overlap the VRAM on some cards.
Tested on: radeon, intel, mga, and via.
This will break nouveau. I will spin new patches shortly.
with all other corresponding CTF places by changing the corresponding
code which is generated by config(8). Or in short, move the '@' from
the variable definition to the use of the variable. [1]
While I'm here break up a long line. [2]
Discussed with: imp [1,2], bde [2]
proper device_t so it faked the devctl event to appear like one, this is now a
notify which allows more information to be passed.
We notify for both the device attach/detach and for each usb interface. A devd
rule can now match on the interface properties, including composite devices
which may have a uvideo interface and also usound and possibly uhid too.
An example to match a umass device with a scsi subclass and BBB protocol would be
notify 100 {
match "system" "USB";
match "subsystem" "INTERFACE";
match "type" "ATTACH";
match "intclass" "0x08";
match "intsubclass" "0x06";
match "intprotocol" "0x50";
action ...
};
The old attach devctl event has been retained for the moment to make merging to
8.1 easier. This was never compatible with 7.x or earlier due to the ugen regex
change needed.
Reviewed by: warner
MFC after: 1 week
mostly work on 64bit host.
The work is based on an original patch submitted by emaste, obtained
from Sandvine's source tree.
Reviewed by: jhb
MFC after: 1 week
occurs. In addition, the delay when programming the short cable fix
should be 100us, not 100ms.
PR: kern/64556
Submitted by: Thomas Hurst <tom at hur.st>
Approved by: rrs (mentor)
MFC after: 1 week
Keep the interrupts disabled in order to avoid preemption problems.
Reported by: tinderbox, b.f. <bf1783 at googlemail dot com>
MFC: 2 weeks
X-MFC: r206878
Assert this.
In the reported panic, vdestroy() fired the assertion "vp has namecache
for ..", because pseudofs may end up doing cache_enter() with reclaimed
dvp, after dotdot lookup temporary unlocked dvp.
Similar problem exists in ufs_lookup() for "." lookup, when vnode
lock needs to be upgraded.
Verify that dvp is not reclaimed before calling cache_enter().
Reported and tested by: pho
Reviewed by: kan
MFC after: 2 weeks
set the NFSCLFLAGS_RECVRINPROG while doing recovery from an expired
lease in a manner similar to r206818 for server reboot recovery.
This will prevent the function that acquires stateids for I/O
operations from acquiring out of date stateids during recovery.
Also, fix up mutex locking on the nfsc_flags field.
MFC after: 1 week
When performing a smp_rendezvous() or more likely, on amd64 and i386,
a smp_tlb_shootdown() the caller will end up with the smp_ipi_mtx
spinlock held, busy-waiting for other CPUs to acknowledge the operation.
As long as CPUs are suspended (via cpu_reset()) between the active mask
read and IPI sending there can be a deadlock where the caller will wait
forever for a dead CPU to acknowledge the operation.
Please note that on CPU0 that is going to be someway heavier because of
the spinlocks being disabled earlier than quitting the machine.
Fix this bug by calling cpu_reset() with the smp_ipi_mtx held.
Note that it is very likely that a saner offline/online CPUs mechanism
will help heavilly in fixing similar cases as it is likely more bugs
of this type may arise in the future.
Reported by: rwatson
Discussed with: jhb
Tested by: rnoland, Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
MFC: 2 weeks
Special deciation to: anyone who made possible to have 16-ways machines
in Netperf
- Properly initialize and destroy system_taskq.
- Add a dummy implementation of taskq_create_proc().
Note: We do not currently use system_taskq in ZFS so this is mostly a
no-op at this time. Proper system_taskq initialization is required
by newer ZFS code.
Ok'ed by: pjd
MFC after: 2 weeks
o) Use <machine/asm.h> macros for register-width, etc., rather than doing it
by hand in a few more assembly files.
o) Reduce diffs between various bits of TLB refill code in exception.S and
between interrupt processing code.
o) Use PTR_* to operate on registers that are pointers (e.g. sp).
o) Add and use a macro, CLEAR_PTE_SWBITS rather than using the
mysteriously-named WIRED_SHIFT to select bits to truncate when loading PTEs.
o) Don't doubly disable interrupts by moving zero to the status register,
especially since that has the nasty side-effect of taking us out of 64-bit
mode.
o) Use CLEAR_STATUS to disable interrupts the first time.
o) Keep SR_PX set as well as SR_[KSU]X when doing exception processing. This
is the bit that determines whether 64-bit operations are allowed.
o) Don't enable interrupts until configure_final(), like most other ports.
attributes for XKPHYS.
o) Make coprocessor 0 accessor function macros for register+selector registers
take the full name so that e.g. (as done in this commit), prid selector 1
can be written through mips_wr_ebase() rather than mips_wr_prid1().
o) Allow for sign extension of 32-bit segment addresses.
o) Remove an unused MIPS-I register number.
address space for an address as aligned by the new pmap_align_tlb()
function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
kmem_alloc_nofault() but allows the caller to specify which find-space
option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
an odd boundary within the TLB, so that they are suitable for insertion as
wired entries and do not have to share a TLB entry with another mapping,
assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
alignment of the kstack address.
Reviewed by: [1] alc
X-MFC-after: Making sure alc has not come up with a better interface.
when an NFSv4 server reboots, by doing two things.
1 - Make the function that acquires a stateid for I/O operations
block until recovery is complete, so that it doesn't acquire
out of date stateids.
2 - Only allow a recovery once every 1/2 of a lease duration, since
the NFSv4 server must provide a recovery grace period of at
least a lease duration. This should avoid recoveries caused
by an out of date stateid that was acquired for an I/O op.
just before a recovery cycle started.
MFC after: 1 week
that page only makes sense if the advice is MADV_WILLNEED. In that case,
the intention is to activate the page, so discouraging the page daemon
from reclaiming the page makes sense. In contrast, in the other cases,
MADV_DONTNEED and MADV_FREE, it makes no sense whatsoever to discourage
the page daemon from reclaiming the page by setting PG_REFERENCED.
Wrap a nearby line.
Discussed with: kib
MFC after: 3 weeks
sleeping on that page is nonsensical. Doing so reduces the likelihood
that the page daemon will reclaim the page before the thread waiting in
vm_object_backing_scan() is reawakened. However, it does not guarantee
that the page is not reclaimed, so vm_object_backing_scan() restarts
after reawakening. More importantly, this muddles the meaning of
PG_REFERENCED. There is no reason to believe that the caller of
vm_object_backing_scan() is going to use (i.e., access) the contents of
the page. There is especially no reason to believe that an access is
more likely because vm_object_backing_scan() had to sleep on the page.
Discussed with: kib
MFC after: 3 weeks
either redundant or harmful, depending on the caller. For example, when
called by vm_fault(), it is redundant. However, when called by
vm_thread_swapin(), it is harmful. Specifically, if the thread is later
swapped out, having PG_REFERENCED set on its stack pages leads the page
daemon to reactivate these stack pages and delay their reclamation.
Reviewed by: kib
MFC after: 3 weeks
o) Mask off PAGE_MASK bits in pmap_update_page, etc., rather than modifying the
badvaddr in trapframe. Some nearby interfaces already did this.
o) Make PTEs "unsigned int" for now, not "unsigned long" -- we are only ready
for them to be 32-bit on 64-bit platforms.
o) Rather than using pmap_segmap and calculating the offset into the page table
by hand in trap.c, use pmap_pte().
o) Remove unused quad_syscall variable in trap.c.
o) Log things for illegal instructions like we do for bad page faults.
o) Various cast cleanups related to how to print registers.
o) When logging page faults, show the page table information not just for the
program counter, but for the fault address.
o) Modify support.S to use ABI-neutral macros for operating on pointers.
o) Consistently use CALLFRAME_SIZ rather than STAND_FRAME_SIZE, etc.
o) Remove unused insque/remque functions.
o) Remove some coprocessor 0 accessor functions implemented in assembly that
are unused and have inline assembly counterparts.
o) Remove NBPG, PGOFSET and PGSHIFT. Use the standard names.
o) Remove some unused macros and move things from param.h to vmparam.h that
belong in the latter. (Actually, all of the kernel segment values, virtual
addresses, etc., belong in one place, but this is a step in the right
direction.)
same time.
o) Remove some unused trivial uart functions from octeon_machdep now that the
uart part is fully working and they are unused.
o) Use __func__ instead of __FUNCTION__.
o) Use intr_*() instead of other routines that do the same thing.
o) Remove some duplicate printfs from the Octeon port, as well as duplicate
setting of Maxmem.
o) Use the right frequency divider on Octeon.
o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core.
o) Remove some unused macros in the Octeon port.
o) Use mips_sync() around use of the global dpcpu, whose value may not be
visible to APs at first.
o) When loading the first thread's stack, use macros to make the code correct
for n64 as well.
o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX
driver.
that turned out to be unrelated, and the rest was, as pointed out by Neel,
just wrong-headed.
o) Tweak mem.c to fix use of /dev/kmem for direct-mapped addresses.
ones implemented using assembly.
o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate
<machine/psl.h> as a result.
o) Use intr_*() rather than *intr(), consistently.
o) Use register_t instead of u_int in some trap code.
o) Merge some more endian-related macros to machine/asm.h from NetBSD.
o) Add PTR_LI macro, which loads an address with the correct sign-extension for
a pointer.
o) Restore interrupts when bailing out due to an excessive IRQ in
nexus_setup_intr().
o) Remove unused functions from psraccess.S.
o) Enter temporary virtual entries for large memory access into the page tables
rather than simply hoping they stay resident in the TLB and we don't need to
do a refill for them.
o) Abstract out large memory mapping setup/teardown using some macros.
o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just
like we do when we can use the direct map.
sparc64.
o) Use uiomove_fromphys rather than the broken fpage mechanism for /dev/mem.
o) Update sf_buf allocator to not share buffers and to do a pmap_qremove when
done with an sf_buf so as to better track valid mappings.
bit.
o) Remove some unused inlines.
o) Generate CP0 access functions for 64-bit TLB registers when building for
n64.
o) Add an inline function version of the COP0_SYNC macro.
no flowid is present, this was causing some bad
reordering, now just use 0.
Also, add a few watchdog bits, and tx handler bits
that were corrected in igb.
for opens done locally in the client when a delegation for the file
was held. This could cause the client to crash in crsetgroups() when
recovering from a server crash/reboot. This patch fills in the
recovery credentials for this case, in order to avoid the client crash.
Also, add KASSERT()s to the credential copy functions, to catch any
other cases where the credentials aren't filled in correctly.
MFC after: 1 week
- Re-probe xfp / sfp+ socket on link events, in case user
has changed transceiver
- correctly report current media to avoid confusing lagg (reported by Panasas)
- Report link speed (submitted by yongari)
Reviewed by: yongari (earlier version)
MFC after: 7 days
Previsouly this condition was reported with EIO by bio_offset > mediasize
check.
Perhaps that check should be extended to bio_offset+bio_length > mediasize.
MFC after: 1 week
d_mediasize
CD_FLAG_VALID_TOC is not required for setting those media properties.
PR: kern/145385
Submitted by: Juergen Lock <nox@jelal.kn-bremen.de>
a slightly different version
Tested by: Pavel Sukhoy <sukhoy@ripn.net>,
Markus Wild <m.wild@cybernet.ch>,
Juergen Lock <nox@jelal.kn-bremen.de>,
uqs
MFC after: 1 week
interface considers that it hits a fatal error, and will not copyout
the request structure back for _IOW and _IOWR ioctls, keeping them
untouched.
The previous implementation of the SIOCGIFDESCR ioctl intends to
feed the buffer length back to userland. However, if we return
an error, the feedback would be defeated and ifconfig(8) would
trap into an infinite loop.
This commit changes SIOCGIFDESCR to set buffer field to NULL to
indicate the previous ENAMETOOLONG case.
Reported by: bschmidt
MFC after: 2 weeks
disable alq, it acts as if alq had not been enabled in the build.
in other words, the rest of ktr is still available for use.
If you really don't want that as well, set the mask to 0.
MFC after:3 weeks
it from machine/in_cksum.h. This definition prevents us from using
hand-tuned assembler versions of in_cksum.
# this fixes the modules build on arm for ipfilter.
This driver was written by Alexander Pohoyda and greatly enhanced
by Nikolay Denev. I don't have these hardwares but this driver was
tested by Nikolay Denev and xclin.
Because SiS didn't release data sheet for this controller, programming
information came from Linux driver and OpenSolaris. Unlike other open
source driver for SiS190/191, sge(4) takes full advantage of TX/RX
checksum offloading and does not require additional copy operation in
RX handler.
The controller seems to have advanced offloading features like VLAN
hardware tag insertion/stripping, TCP segmentation offload(TSO) as
well as jumbo frame support but these features are not available
yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw>
who sent fix for receiving VLAN oversized frames.
unneeded for legacy hardware.
Also remove some TSO related cruft.
Add some watchdog_time setting that was missing, thanks
to Mikolaj Golub for pointing that out.
subsequently in pmap_pinit() with the following signature:
panic: lock "pmap" 0xc7878bc8 already initialized
This bug was uncovered by the changes made to vm_map.c in r206140.
This causes a panic in vm_thread_dispose() when it tries to add this kstack
to the kstack cache. This happens only when 'td_kstack' is not (PAGE_SIZE * 2)
bytes aligned and we have unmapped the page at that address in cpu_thread_alloc.
Pointed out by: nwhitehorn@
The sequence number is used as the name of a sysctl node,
under which we add the MCA records using the CPU id as the
leaf name.
Add the hw.mca.inject sysctl to provide a way to inject
MC errors and trigger machine checks.
PR: ia64/113102
useful it will be, but we really need to be keying off something other
than MACHINE for this anyway since on arm and mips we have lots of
these running around (one for each SoC family)...
instead of causing erratic behavior. Currently make_dev(9) can't fail, so
there is no way to report an error to make_dev(9) callers.
- Disallow using "." and ".." in device path names. It didn't work previously
but now it is reported rather than panicing.
- Treat multiple sequential slashes as single in device path names.
Discussed with: pjd
about inacessible or wrong mcontext, and for dreaded "kernel trap with
interrupts disabled" situation. The later is changed when trap is
generated from user mode (shall never be ?).
Normalize the messages to include both pid and thread name.
MFC after: 1 week
DTYPE_VNODE.
Only acquire locks for O_EXLOCK/O_SHLOCK if file type is still vnode,
since we allow for fcntl(2) to process with advisory locks for
DTYPE_VNODE only. Another reason is that all fo_close() routines need to
check and release locks otherwise.
For O_TRUNC, call fo_truncate() instead of truncating the vnode.
Discussed with: rwatson
MFC after: 2 week
in a device independent manner. Also include an example anticipatory
scheduler, gsched_rr, which gives very nice performance improvements
in presence of competing random access patterns.
This is joint work with Fabio Checconi, developed last year
and presented at BSDCan 2009. You can find details in the
README file or at
http://info.iet.unipi.it/~luigi/geom_sched/
to remove it to avoid panics in case of two threads trying to remove it in
parallel.
PR: kern/116837
Submitted by: Takahiro Kurosawa (takahiro.kurosawa gmail.com) (orig version)
MFC after: 10 days
Previously, one of these limits was initialized in two places to a
different value in each place. Moreover, because an unsigned int was used
to represent the amount of pageable physical memory, some of these limits
were incorrectly initialized on 64-bit architectures. (Currently, this
error is masked by login.conf's default settings.)
Make vm_thread_swapin() and vm_thread_swapout() static.
Submitted by: bde (an earlier version)
Reviewed by: kib
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
