1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
If a kerberos .hx source file is newer than the .h copy, but the content
is the same, then during buildworld the "cmp -s || cp" command in the
.hx.h rule would do nothing, leaving the .h copy with the older
timestamp. During installworld the rule would again be invoked, causing
a failure as neither cmp or cp would exist in the temporary path.
As the underlying issue should be resolved by r262209, unconditionally
copy the file.
No objection: peter@
Tested by: gjb@
Sponsored by: The FreeBSD Foundation
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
levels. The root of the problem was that make was attempting to run up
to three concurrent asn1_compile commands to produce the three outputs
that it was declared to produce. The failure was caused when the
asn1_compiles were started out of sync and a later one was truncating
the files that another thread was trying to copy. In reality it is
supposed to be run exactly once and all three outputs are produced in
one pass.
Use the same hack as for the parent's Makefile.inc for the compile_et
multi-output rule.
libkafs5 needs a header from libkrb5, it includes this from
${.OBJDIR}/mumble, this used to work fine as long as you happen to have
a krb_err.h in your base system, this doesn't work for bootstrapping or
using a cross-compiler with a different sysroot. This is just a
best-effort bandaid, sufficient parallelism can still break it.
Fix a SRCS override that dropped krb5_err.h.
Discussed with: stas
private shared libraries, instead of hacked-together archives of PIC
objects. This makes it possible to build a static libkrb5 that works.
Reviewed by: stas
Approved by: re (gjb)
that it handles the ERANGE error return case. Without this fix, authentication
of users for certain system setups could fail unexpectedly.
Reported by: Elias Martenson (lokedhs@gmail.com)
Tested by: Elias Martenson (earlier version)
MFC after: 2 weeks
With the current binutils, symbols from libheimtlm.so are loaded because
it is referenced by DT_NEEDED. This feature is not implemented in
mclinker (https://code.google.com/p/mclinker/issues/detail?id=104).
I encountered the same issue when linking with a recent devel/binutils
invoked via clang. This was the only use of DT_NEEDED in the tree so
removing it simplifies toolchain requirements.
Submitted by: Pete Chou <petechou@gmail.com> (mclinker issue)
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
of the version map just exported all the symbols, which caused a
binutils bug being triggered when ld fails to link two objects, one
of which exports a versioned version of the symbol, and another --
unversioned. [1]
- Also add version map for libkafs5.
Submitted by: jchandra@ (based on)
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
kerberos libraries were not linked properly (missing dependencies),
which causes 3rd party applications linking to fail when --as-needed
ld flag is used. I also added the --no-undefined ld(1) flag to make
sure that there're no missing dependencies.
MFC after: 3 days
This change was erronously ommitted from the r185690, and attempt
to simply add the prototype to string.h has revealed that several
contributed programs defined local prototypes for strndup(), controlled
by autoconfed config.h. So, manually change #undef HAVE_STRNDUP to
#define HAVE_STRNDUP 1. Next import of the corresponding program would
regenerate config.h, overriding the changes in this commit.
No objections from: kan
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.
Sponsored by: Isilon Systems
Reviewed by: alfred
libraries had not had their versions bumped relative to 6.3-REL but
had indeed been changed. We need to bump their version so they can be
properly added to the compat6x port:
libasn1.so.8 libgssapi.so.8 libhdb.so.8 libkadm5clnt.so.8
libkadm5srv.so.8 libkafs5.so.8 libkrb5.so.8 libobjc.so.2
MFC After: 1 day
In the Heimdal distro, only kerberized telnet refers to INET6,
but we don't build it, we use contrib/telnet linked with the
Kerberos libs instead.
Tested with: cmp(1)
similar the the Solaris implementation. Repackage the krb5 GSS mechanism
as a plugin library for the new implementation. This also includes a
comprehensive set of manpages for the GSS-API functions with text mostly
taken from the RFC.
Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
causes them to be recreated (if needed) early, when doing "make
depend" here, before generating headers that depend on them.
This should fix breakages often seen while doing incremental
(NO_CLEAN) cross-builds.
branches but missed HEAD. This patch extends his a little bit,
setting it up via the Makefiles so that adding _FREEFALL_CONFIG
to /etc/make.conf is the only thing needed to cluster-ize things
(current setup also requires overriding CFLAGS).
From Peter's commit to the RELENG_* branches:
> Add the freebsd.org custer's source modifications under #ifdefs to aid
> keeping things in sync. For ksu:
> * install suid-root by default
> * don't fall back to asking for a unix password (ie: be pure kerberos)
> * allow custom user instances for things like www and not just root
The Makefile tweaks will be MFC-ed, the rest is already done.
MFC after: 3 days
Approved by: re (dwhite)
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
works before bsd.dep.mk,v 1.44, whether .depend file exists or not,
but the contents of .depend file is wrong. With bsd.dep.mk,v 1.44,
the contents of .depend file is always broken, and build without a
.depend file is broken too. With this change it works reliably in
all cases. Ugh.
- Dropped support for standalone builds, this was only partially
supported anyway, and required so much magic in makefiles that
made life dangerous (e.g., by using the custom yacc rules).
- Got rid of .OBJDIR in makefiles -- makes building of individual
files possible again.
- Made the .x.c transformations -j safe.
- Reprogrammed LDADD to fix static build of some utilities that
was broken.
- Fixed LDFLAGS and DPADD in the WITH_OPENLDAP case -- positively
affects the contents of .depend files.
- Removed redundant .h's from SRCS, only kept those that are
generated.
- libkrb5/ INCS were bogusly installed again with libgssapi/.
- Made build-tools real tools with their own makefiles in
separate directories. This allows us to properly track
their dependencies, etc.
- Faster build, 21% less of makefile code!
Approved by: nectar
Reviewed by: markm
Silence on: arch
(`WITH_OPENLDAP'). Previously, the KDC could fail to start if it was
invoked before `ldconfig'.
This solution was chosen rather than adding an `ldconfig' dependency
to `kerberos' in rcNG, because it is more robust and there is no
guarantee that the LDAP libraries will be in ldconfig's path anyway.
Problem reported by: Sean McNeil <sean@mcneil.com>
looking ${.OBJDIR} work that has the up-side of actually working
in upgrade and make -jN cases.
This needs to be revisited further, and it is conceivable that
the ${.OBJDIR} stuff can be simplified, but the sheer number of
edge cases and other causes make this Hard(tm). For now, this works.
