what to do with it.
This forces us to scan targets sequentially, not in parallel.
The reason we might want to do this is that SPI negotiation
might not work right at the SIM level if we try to do it
in parallel. We *could* fix this for each SIM where this is
broken, but it's a lot harder to do that when we can simply
ask CAM to probe sequentially.
If PIM_SEQSCAN is not set (default), the original behaviour for
probing is unchanged.
LUN probing is still done in parallel for each target in either
case.
While we're at it, clean up some resource leakage for error
cases.
Reviewed by: ken, scott, scsi@
MFC after: 1 week
Now, encryption algorithm is given using '-e' option, not '-a'.
The '-a' option is now used to specify authentication algorithm.
Supported by: Wheel Sp. z o.o. (http://www.wheel.pl)
255.255.255.0, and a default route with gateway x.x.x.1. Now if
the address mask is changed to something more specific, e.g.,
255.255.255.128, then after the mask change the default gateway
is no longer reachable.
Since the default route is still present in the routing table,
when the output code tries to resolve the address of the default
gateway in function rt_check(), again, the default route will be
returned by rtalloc1(). Because the lock is currently held on the
rtentry structure, one more attempt to hold the lock will trigger
a crash due to "lock recursed on non-recursive mutex ..."
This is a general problem. The fix checks for the above condition
so that an existing route entry is not mistaken for a new cloned
route. Approriately, an ENETUNREACH error is returned back to the
caller
Approved by: andre
o define HAL_SOFTC, HAL_BUS_TAG, and HAL_BUS_HANDLE to be machine
independent; this fixes portability issues with bsd systems
o add ah_disable api for turning off operation of both MAC and PHY
o add ah_getAntennaSwitch and ah_setAntennaSwitch api's for better control
of antenna usage and diversity
o add ah_setAckCTSRate and ah_setAckCTSRate for controlling tx rate of
h/w generated frames
o add ah_setBeaconTimers api for simpler setting of the beacon timer registers
o remove ah_waitForBeaconDone api
o add HAL_TXDESC_DURENA flag to enable h/w duration setting in tx descriptor
o correct documentation of min/max tx power units (.5 dBm)
o switch arm, mips, and powerpc builds to use functions for register
read/write operations
o fix sparc builds to not reference %g2 and %g3 registers
o add public builds for SoC's
MFC after: 1 month
- Remove "device cryptodev" as it is not needed for compiling padlock(4)
into the kernel. Actually it is not advisable, because padlock
instructions can be used directly from userland, so passing the work
through the kernel is a bad idea.
with fast_ipsec(4) and geli(8) authentication (comming soon).
If consumer requests only for HMAC algorithm (without encryption), return
EINVAL.
- Add support for the CRD_F_KEY_EXPLICIT flag, for both encryption and
authentication.
process was sucessfully audited. Otherwise, generate the PID
token. This change covers the pid < 0 cases, and pid lookup
failure cases.
Submitted by: wsalamon
Obtained from: TrustedBSD Project
set to ILACC rather than PCnet-PCI as VMware doesn't implement ILACC
compatibility, resulting in the VMware virtual machine to crash if
enabled. Add a comment regarding usage of ILACC vs. PCnet-PCI mode.
Reported and tested by: gnn, wsalamon
global audit trail configuration. This allows applications consuming
audit trails to specify parameters for which audit records are of
interest, including selecting records not required by the global trail.
Allowing application interest specification without changing the global
configuration allows intrusion detection systems to run without
interfering with global auditing or each other (if multiple are
present). To implement this:
- Kernel audit records now carry a flag to indicate whether they have
been selected by the global trail or by the audit pipe subsystem,
set during record commit, so that this information is available
after BSM conversion when delivering the BSM to the trail and audit
pipes in the audit worker thread asynchronously. Preselection by
either record target will cause the record to be kept.
- Similar changes to preselection when the audit record is created
when the system call is entering: consult both the global trail and
pipes.
- au_preselect() now accepts the class in order to avoid repeatedly
looking up the mask for each preselection test.
- Define a series of ioctls that allow applications to specify whether
they want to track the global trail, or program their own
preselection parameters: they may specify their own flags and naflags
masks, similar to the global masks of the same name, as well as a set
of per-auid masks. They also set a per-pipe mode specifying whether
they track the global trail, or user their own -- the door is left
open for future additional modes. A new ioctl is defined to allow a
user process to flush the current audit pipe queue, which can be used
after reprogramming pre-selection to make sure that only records of
interest are received in future reads.
- Audit pipe data structures are extended to hold the additional fields
necessary to support preselection. By default, audit pipes track the
global trail, so "praudit /dev/auditpipe" will track the global audit
trail even though praudit doesn't program the audit pipe selection
model.
- Comment about the complexities of potentially adding partial read
support to audit pipes.
By using a set of ioctls, applications can select which records are of
interest, and toggle the preselection mode.
Obtained from: TrustedBSD Project
device went away while open or if you tried to change the config
number while devices were open. Based on the patch from the PR with
a number of changes as discussed with the submitter.
PR: usb/97271
Submitted by: Anish Mistry
knowledge of user vs. kernel audit records into
audit_worker_process_record(). This largely confines vnode
knowledge to audit_record_write(), but avoids that logic knowing
about BSM as opposed to byte streams. This will allow us to
improve our ability to support real-time audit stream processing
by audit pipe consumers while auditing is disabled, but this
support is not yet complete.
Obtained from: TrustedBSD Project
Break out logic to call audit_record_write() and handle error
conditions into audit_worker_process_record(). This will be the
future home of some logic now present in audit_record_write()
also.
Obtained from: TrustedBSD Project
worker.
Rename audit_commit_cv to audit_watermark_cv, since it is there to
wake up threads waiting on hitting the low watermark. Describe
properly in comment.
Obtained from: TrustedBSD Project
src/sys/security/audit:
- Clarify and clean up AUR_ types to match Solaris.
- Clean up use of host vs. network byte order for IP addresses.
- Remove combined user/kernel implementations of some token creation
calls, such as au_to_file(), header calls, etc.
Obtained from: TrustedBSD Project
- Cleanup of AUR_ data types.
- Comment fixes.
- au_close_token() definition.
- Break out of kernel vs. user space token interfaces for headers.
Note: this may briefly break the kernel build until other kernel files are
updated to match.
Obtained from: TrustedBSD Project
