If certctl is installed on the system we're configuring, do a certctl
rehash.
Note that certctl may not be present if the world we've installed was built
either WITHOUT_OPENSSL or WITHOUT_CAROOT. In this scenario, we don't
currently see if the host has a certctl as this may be an indication that
the system *shouldn't* have certs installed into /etc/ssl.
Reviewed by: allanjude, dteske
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24640
- Mention bootconfig target in TARGETS section.
- Document PARTITIONS variable, which is only mentioned in the examples,
but doesn't have its own point.
Submitted by: arrowd@
Reviewed by: bcr
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22927
Includes commentary of when ZFS works well by default (>= 8GB RAM),
and where to go for information on ZFS tuning if required.
Also hoist the options text to the top of script as variables
(will help with future international translations).
Reviewed by: philip, dteske, karels, imp, emaste
Approved by: rgrimes
Differential Revision: https://reviews.freebsd.org/D23224
This resulted in the partitioning step failing if either of the
"Auto (UFS)" or "Manual" options were selected.
Reason: partedit was attempting to open a directory (TMPDIR) read/write,
which resulted in errno(2) 21 - EISDIR - Is a directory.
Reported by: Clay Daniels <clay.daniels.jr@gmail.com>
Reviewed by: Ryan Moeller <ryan@freqlabs.com>
Approved by: emaste, bcran
Differential Revision: https://reviews.freebsd.org/D23232
Pass the list of user selected disks from zfsboot to bootconfig so that
the latter doesn't rely on ESP autodetection that apparently fails for
some cases, e.g. memstick installation with nvme (boot) and sata drives.
While here, fix printing of debug messages in bootconfig.
Reviewed by: bcran, imp, tsoome
Differential Revision: https://reviews.freebsd.org/D21930
installer when installing the system on a ZFS root filesystem.
For arm64, zfs_load="YES" does not add opensolaris.ko as a kld
dependency, so add it explicitly to prevent boot-time failures
out-of-box.
PR: 240478
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Summary:
Now that mpc85xx can boot via ubldr, move ubldr to a separate
filesystem, mounted on /boot/uboot, so that a fresh install can boot correctly.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D18709
When using a gmirror, entries in /dev can be removed. So instead of using
kern.disks, get the list of disks from "gpart status -sg" instead.
We assume that any 'efi' partition that can't be mounted as msdosfs should
be used as an ESP. However, the ESP on the CD/DVD can't be mounted read-write
and so was being treated as if unformatted. Try the mount as read-only
instead, to catch cases like this.
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18645
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
the snapshots directory, not releases.
Reported by: David Marec david.marec _at_ davenulle _dot_ org
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
Reported by: Jose Luis Duran
Reviewed by: bcr
Approved by: re (gjb), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17409
- Extend the bsdinstall(8) man page with ZFS installation scripting
details. [1]
- Extend the bsdinstall(8) man page with the description of all the ZFS
variables involved in a scripted installation of ZFS-based systems. [1]
- Extend the SCRIPTING section with an example for a ZFS-based scripted
installation. [1]
- Create a new section explaining how ZFS datasets must be written into
a variable to get them set on the final system. [1]
While here:
- Add Roberto to the copyrights for recognition as changes to the manual
page are huge.
- Use "Dq" for default values.
- Use sysrc(8) instead of echo in examples.
Submitted by: Roberto Fernandez Cueto <roberfern@gmail.com> [1]
Reviewed by: dteske
Approved by: re (gjb), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D14169
After r336252 it is no longer necessary to have a separate bootpool when
booting from an encrypted disk with UEFI.
This change also switches the EFI System Partition contents from
the 800 KB boot1.efifat to a new 200 MB filesystem created with newfs_msdos
and uses loader.efi directly, instead of boot1.efi.
PR: 228916
Reviewed by: dteske
MFC after: 1 month
Relnotes: yes
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D12315
Some mpc85xx devices with u-boot need MBR partitioning with a FAT boot
partition. Since the infrastructure is already in place to have a dedicated
boot partition, this adds the necessary bits to use that infrastructure with
mpc85xx boards.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15664
Summary:
The kernel reads 'kernelname' to set the kern.bootfile sysctl. By setting this,
'make installkernel' will backup the running kernel as appropriate.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15660
SUJ + cg checksums produce spurious warnings after an unclean shutdown
(e.g. a crash). For now disable SUJ for UFS installs so installing from
a FreeBSD 12 snapshot results in a usable filesystem, until this can be
fixed.
PR: 225110
Submitted by: Arshan Khanifar <arshankhanifar gmail.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13890
foundation for invoking efibootmgr as part of new-style EFI booting on
x86. On PS3 and PowerNV, which are booted using Linux kexec from petitboot
rather than by loader(8), install the kernel and the rest of /boot to a
FAT partition and set up the appropriate petitboot configuration file
there.
The new bootconfig installer stage can do platform-dependent modifications
more complex than partition layout and installation of boot blocks and can
be used to (as here) set up some special configuration files, run efibootmgr,
or boot0cfg.
MFC after: 1 month
one of the directories in the filesystem hierarchy is a FAT mountpoint,
settings its times will fail, which would cause installation to abort.
Instead, make this a best-effort thing.
Handling this error is a hack and a better internal scheme for handling
this should be added to libarchive.
Some users, especially those that are new, might be confused when passwd
does not echo anything. Inform users that the password will not be
visible.
PR: 196113
Submitted by: Byron Grobe <grobe0ba@gmail.com>
the installer but not mounted (i.e. with boot1.efifat dd'ed to them
rather than the forthcoming proper filesystem) would get newfs_msdos run
on them immediately after the boot code was copied. This would overwrite
the bootstrap code, causing the EFI system partition to be blanked and
resulting in an unbootable system.
PR: 224562
layer, for example, to specify that the EFI boot partition should be
mounted at /efi and formatted normally with newfs_msdos rather than
splatted to from /boot/boot1.efifat.
This commit adds only the API for this; actual platform use will come later.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
When you install a computer for the first time, the date in the CMOS sometimes
not accurate and you need to ntpdate as ntpd will fail a the time difference
is too big.
Add an option in bsdinstall to enable ntpdate that will do that for us.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D13149
r309934 cleaned up some cases in bsdinstall to use heredocs but broke
the indentation of the generated output, because <<- heredocs strip
leading tabs.
PR: 221982
Reviewed by: allanjude, dteske
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13190
