We support bulk reads of the register set, but not reading specific
registers via the 'p' packet. This is useful at least for the 'call'
command in gdb.
Reviewed by: cem
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 44
Differential Revision: https://reviews.freebsd.org/D27644
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
Fix broken CTLFLAG_SKIP when present on the first child of the requested
node.
We don't need to ignore skip for the first node because in sysctl_all()
we've implicitly visited the first node already when oid is specified.
The first call to show_var() in here is after we have iterated to the
next node. When the command line specifically requests a non-node sysctl
we go straight into show_var() without calling sysctl_all().
Reported by: jhb
Reviewed by: jhb
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D27674
r368193 was suppsed to rename the MOF firmware image, but the
qat_c2xxxfw makefile defined the two images in the wrong order so the
MMP image was renamed instead.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
When copying sockaddrs out to userspace, we pad them to a multiple of
the platform alignment (sizeof(long)). However, some sockaddr sizes,
such as struct sockaddr_dl, are not an integer multiple of the
alignment, so we may end up copying out uninitialized bytes.
Fix this by always bouncing through a pre-zeroed sockaddr_storage.
Reported by: KASAN
Reviewed by: melifaro
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27729
g_handleattr_int() consumes the bio if the attribute matches, so when we
check bp->bio_cmd bp may have been freed.
Move GETATTR handling to a separate function to avoid the problem. We
do not need to set bio_completed for such bios, g_handleattr_int() will
handle it. Also remove the setting of bio_resid before the
devstat_end_transaction_bio() call. All of the md(4) bio handlers set
bio_resid already.
Reported by: KASAN
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27724
We use a bitmap to track which cylinder groups have changed between
snapshot creation and filesystem suspension. The "legs" of the bitmap
are four bytes wide (see ACTIVESET()) so we must round up the allocation
size to a multiple of four bytes.
I believe this bug is harmless since UMA/kmem_* will both pad the
allocation and zero the full allocation. Note that malloc() does inline
zeroing when the allocation size is known at compile-time.
Reported by: pho (using KASAN)
Reviewed by: kib, mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27731
Vectored aio will require each aiocb to be associated with multiple
bios, so we can't store a link to the latter from the former. But we
don't really need to. aio_biowakeup already knows the bio it's using,
and the other fields can be stored within the bio and/or buf itself.
Also, remove the unused kaiocb.backend2 field.
Reviewed By: kib
Differential Revision: https://reviews.freebsd.org/D27682
git's default commit message includes the list of staged, unstaged, and
untracked files; adding our metadata tags and then their descriptions
made for a very long template.
Move the descriptions to the metadata lines themselves.
Reviewed by: bcr
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27664
Do not explicitly encode control characters widths as 0
allowing wcwidth() to return the proper implicit value for
non-printable characters (-1).
Reported by: naddy
This improves cache behaviour by not writing to the same variable from
multiple cores simultaneously.
pf_state is only used in the kernel, so can be safely modified.
Reviewed by: Lutz Donnerhacke, philip
MFC after: 1 week
Sponsed by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27661
It turns out pf incorrectly updates the TCP checksum if the TCP option
we're modifying is not 2-byte algined with respect to the start of the
packet.
Create a TCP packet with such an option and throw it through a scrub
rule, which will update timestamps and modify the packet.
PR: 240416
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27688
The algorithm we use to update checksums only works correctly if the
updated data is aligned on 16-bit boundaries (relative to the start of
the packet).
Import the OpenBSD fix for this issue.
PR: 240416
Obtained from: OpenBSD
MFC after: 1 week
Reviewed by: tuexen (previous version)
Differential Revision: https://reviews.freebsd.org/D27696
And switch from int to bool while at it.
Reviewed by: melifaro@
Differential Revision: https://reviews.freebsd.org/D27725
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
I suspect that virtualization techniques improved from the time when we
have to effectively disable TSC use in VM. For instance, it was reported
(complained) in https://github.com/JuliaLang/julia/issues/38877 that
FreeBSD is groundlessly slow on AWS with some loads.
Remove the check and start watching for complaints.
Reviewed by: emaste, grehan
Discussed with: cperciva
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27629
The packet, if processed at this point, was already parsed to be UDP
directed to a vxlan port.
Connect-X 4+ does not provide easy method to infer which parser
processed the packet, so driver cannot set the flag without a lot of
efforts which are only to satisfy the formal requirements.
Reviewed by: bryanv, np
Sponsored by: Mellanox Technologies/NVidia Networking
Differential revision: https://reviews.freebsd.org/D27449
MFC after: 1 week
Otherwise libinput refuses to recoginize some Synaptics touchpads with
"kernel bug: device has min == max on ABS_X" message in Xorg.log.
PR: 251149
Reported-by: Jens Grassel <freebsd-ports@jan0sch.de>
Tested-by: Jens Grassel <freebsd-ports@jan0sch.de>
MFC-after: 2 weeks
Conducted tests showed that Embedded Controller is not mandatory for
WMI extensions to work.
Reported-by: yuripv
Reviewed-by: avg
MFC-after: 2 weeks
Differential-Revision: https://reviews.freebsd.org/D27653
The adr instruction allows for an address of +-1M from the instruction.
If we replace these with an adrp and an add instruction we can generate
an address +-4G. The adrp will get an address of the 4k page the label
is within, and the add uses the :lo12: prefix to add just the low bits
to this address.
This will allow us to move things around with fewer issues than if we
needed to keep them within the +-1MB range.
Sponsored by: Innovate UK
When tearing down a VNET, netgraph sends shutdown messages to all of the
nodes before detaching interfaces (SI_SUB_NETGRAPH comes before
SI_SUB_INIT_IF in teardown order). ng_ether nodes handle this by
destroying themselves without detaching from the parent ifnet. Then,
when ifnets go away they detach their ng_ether nodes again, triggering a
use-after-free.
Handle this by modifying ng_ether_shutdown() to detach from the ifnet.
If the shutdown was triggered by an ifnet being destroyed, we will clear
priv->ifp in the ng_ether detach callback, so priv->ifp may be NULL.
Also get rid of the printf in vnet_netgraph_uninit(). It can be
triggered trivially by ng_ether since ng_ether_shutdown() persists the
node unless NG_REALLY_DIE is set.
PR: 233622
Reviewed by: afedorov, kp, Lutz Donnerhacke
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27662
In order to efficiently serve web traffic on a NUMA
machine, one must avoid as many NUMA domain crossings as
possible. With SO_REUSEPORT_LB, a number of workers can share a
listen socket. However, even if a worker sets affinity to a core
or set of cores on a NUMA domain, it will receive connections
associated with all NUMA domains in the system. This will lead to
cross-domain traffic when the server writes to the socket or
calls sendfile(), and memory is allocated on the server's local
NUMA node, but transmitted on the NUMA node associated with the
TCP connection. Similarly, when the server reads from the socket,
he will likely be reading memory allocated on the NUMA domain
associated with the TCP connection.
This change provides a new socket ioctl, TCP_REUSPORT_LB_NUMA. A
server can now tell the kernel to filter traffic so that only
incoming connections associated with the desired NUMA domain are
given to the server. (Of course, in the case where there are no
servers sharing the listen socket on some domain, then as a
fallback, traffic will be hashed as normal to all servers sharing
the listen socket regardless of domain). This allows a server to
deal only with traffic that is local to its NUMA domain, and
avoids cross-domain traffic in most cases.
This patch, and a corresponding small patch to nginx to use
TCP_REUSPORT_LB_NUMA allows us to serve 190Gb/s of kTLS encrypted
https media content from dual-socket Xeons with only 13% (as
measured by pcm.x) cross domain traffic on the memory controller.
Reviewed by: jhb, bz (earlier version), bcr (man page)
Tested by: gonzo
Sponsored by: Netfix
Differential Revision: https://reviews.freebsd.org/D21636
When ktls_bind_thread is 2, we pick a ktls worker thread that is
bound to the same domain as the TCP connection associated with
the socket. We use roughly the same code as netinet/tcp_hpts.c to
do this. This allows crypto to run on the same domain as the TCP
connection is associated with. Assuming TCP_REUSPORT_LB_NUMA
(D21636) is in place & in use, this ensures that the crypto source
and destination buffers are local to the same NUMA domain as we're
running crypto on.
This change (when TCP_REUSPORT_LB_NUMA, D21636, is used) reduces
cross-domain traffic from over 37% down to about 13% as measured
by pcm.x on a dual-socket Xeon using nginx and a Netflix workload.
Reviewed by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21648
- varios "new sentence, new line" warnings
- varios "sections out of conventional order" warnings
- varios "unusual Xr order" warnings
- varios "missing section argument" warnings
- varios "no blank before trailing delimiter" warnings
- varios "normalizing date format" warnings
MFC after: 1 month
- Add missing quotation mark for a comment above the .Dd
- inserting missing end of block: Sh breaks Bd
- skipping paragraph macro: Pp before Bl
- skipping paragraph macro: Pp before Bd
- empty block: Bd
MFC after: 1 week
- new sentence, new line
- sections out of conventional order: Sh FILES
- unusual Xr order: bthost(1) after bthidd(8)
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order: Sh EXIT STATUS
MFC after: 1 week
