Commit Graph

47 Commits

Author SHA1 Message Date
yongari
e7491a16ad Remove ALC_LOCK_ASSERT in alc_stop_queue(). This function is now
called in device attach without holding a driver lock so it
resulted in panic.

Reported by:	markj
2014-10-13 01:06:40 +00:00
yongari
2e1d5c2b85 Add support for QAC AR816x/AR817x Gigabit/Fast Ethernet controllers.
These controllers seem to have the same feature of AR813x/AR815x and
improved RSS support(4 TX queues and 8 RX queues).  alc(4) supports
all hardware features except RSS.  I didn't implement RX checksum
offloading for AR816x/AR817x just because I couldn't get
confirmation from the Vendor whether AR816x/AR817x corrected its
predecessor's RX checksum offloading bug on fragmented packets.
This change adds supports for the following controllers.
 o AR8161 PCIe Gigabit Ethernet controller
 o AR8162 PCIe Fast Ethernet controller
 o AR8171 PCIe Gigabit Ethernet controller
 o AR8172 PCIe Fast Ethernet controller
 o Killer E2200 Gigabit Ethernet controller

Tested by:	Many
Relnotes:	yes
MFC after:	2 weeks
HW donated by:	Qualcomm Atheros Communications, Inc.
2014-10-08 05:47:01 +00:00
yongari
b83ad55304 Fix a long standing bug in MAC statistics register access. One
additional register was erroneously added in the MAC register set
such that 7 TX statistics counters were wrong.
2014-10-08 01:03:32 +00:00
glebius
a9ce204398 Mechanically convert to if_inc_counter(). 2014-09-18 21:11:42 +00:00
glebius
9b93b159b3 Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
jhb
e8769d6be2 Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
yongari
e1b5ce307a Increase the number of TX DMA segments from 32 to 35. It turned
out 32 is not enough to support a full sized TSO packet.
While I'm here fix a long standing bug introduced in r169632 in
bce(4) where it didn't include L2 header length of TSO packet in
the maximum DMA segment size calculation.

In collaboration with:	rmacklem
MFC after:		2 weeks
2014-03-31 01:54:59 +00:00
glebius
ff6e113f1b The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
glebius
a69aaa7721 Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
gavin
274e5948cc Switch some PCI register reads from using magic numbers to using the names
defined in pcireg.h

MFC after:	1 week
2012-09-19 12:27:23 +00:00
gavin
5005c75c5d Align the PCI Express #defines with the style used for the PCI-X
#defines.  This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.

This is a mostly mechanical rename:
  s/PCIR_EXPRESS_/PCIER_/g
  s/PCIM_EXP_/PCIEM_/g
  s/PCIM_LINK_/PCIEM_LINK_/g

When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.

Discussed with:	jhb
MFC after:	1 week
2012-09-18 22:04:59 +00:00
yongari
4c371e596b Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
yongari
90836b4689 Disable PHY hibernation until I get more detailed hibernation
programming secret.  The PHY would go into sleep state when it
detects no established link and it will re-establish link when the
cable is plugged in.  Previously it failed to re-establish link
when the cable is plugged in such that it required to manually down
and up the interface again to make it work.  This came from
incorrectly programmed hibernation parameters.  According to
Atheros, each PHY chip requires different configuration for
hibernation and different vendor has different settings for the
same chip.
Disabling hibernation may consume more power but establishing link
looks more important than saving power.
Special thanks to Atheros for giving me instructions that disable
hibernation.

MFC after:	1 week
Approved by:	re (kib)
2011-08-22 20:33:05 +00:00
yongari
f0db6b07fa Fix typo.
Submitted by:	brad at OpenBSD
2011-05-19 23:13:08 +00:00
marius
d0f32374e6 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
jhb
00c3c01f4f Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
yongari
f0f27d3c5b alc_rev was used without initialization such that it failed to
apply AR8152 v1.0 specific initialization code. Fix this bug by
explicitly reading PCI device revision id via PCI accessor.

Reported by:	Gabriel Linder ( linder.gabriel <> gmail dot com )
2011-01-31 20:00:43 +00:00
yongari
747546166f Fix logic error. Due to the bug, it incorrectly checked TXQ status
which in turn can leave TXQ active.

Submitted by:	Brad ( brad <> comstyle dot com )
MFC after:	3 days
2011-01-28 21:03:32 +00:00
yongari
d7200f3f19 Correct wrong definition of PM timer mask and adjust L1/PM timer
value. While I'm here enable all clocks before initializing
controller. This change should fix lockup issue seen on AR8152
v1.1 PCIe Fast Ethernet controller.

PR:	kern/154076
MFC after:	3 days
2011-01-20 18:26:33 +00:00
jhb
38c0ce34b0 - Move ether_ifdetach() earlier and remove now-unneeded IN_DETACH flag.
- Expand locking in interrupt handler.

Reviewed by:	yongari
2011-01-13 21:49:14 +00:00
yongari
6571f04251 Make sure to invoke unlocked foo_start since the taskqueue does not
hold a driver lock. This should fix a regression introduced in
r216925.

PR:	kern/153769
2011-01-12 22:24:07 +00:00
mdf
8045b08e4d sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
jhb
be4690f32e Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
yongari
81c937f5ec Remove unecessary and clearly wrong usage of atomic(9).
Reported by:	avg, jhb, attilio
2010-12-10 21:43:20 +00:00
yongari
0d004de9dc Enable ethernet flow-control on all alc(4) controllers. This change
should reduce a lot of dropped frames under high network load.
2010-11-26 02:10:56 +00:00
yongari
d5b678ca0d Don't bother to enable ASPM L1 to save more power. Even though I am
not able to trigger the issue with sample boards, some users seems
to suffer from freeze/lockup when system is booted without UTP cable
plugged in. I'm not sure whether this is BIOS issue or controller
bug. This change fixes AR8132 lockup issue seen on EEE PC.

Reported by:	kmoore
Tested by:	kmoore
2010-10-30 01:12:54 +00:00
marius
385153aa98 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
yongari
92023f4cc9 Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
yongari
a4ebafd960 Backout r204230. TX mbuf parser for VLAN is still required to
enable TX checksum offloading if VLAN hardware tagging is disabled.
2010-10-14 17:57:52 +00:00
delphij
d7bdcc10e4 status bits should be &'ed against status to be really functional.
Reported by:	Jike Song
Reviewed by:	yongari
MFC after:	1 week
2010-09-16 21:06:23 +00:00
yongari
d05dbde941 Make sure to disable RX MAC in alc_stop_mac(). Previously there
was a logic error which it always enabled RX MAC.
2010-08-13 19:39:33 +00:00
yongari
1e453ce0eb Add support for Atheros AR8151/AR8152 PCIe gigabit/fast ethernet
controller. These controllers are known as L1D(AR8151) and
L2CB/B2(AR8152). This change adds supports for the following
controllers.
 o AR8151 v1.0(L1D) gigabit ethernet controller
 o AR8151 v2.0(L1D) gigabit ethernet controller
 o AR8152 v1.1(L2CB) fast ethernet controller
 o AR8152 v2.0(L2CB2) fast ethernet controller
These controllers have the same feature of AR8131/AR8132 and
support improved power saving control. The user visible change at
this moment is reduced jumbo frame size from 9KB to 6KB. Many
thanks to Atheros for continuing to support FreeBSD.

HW donated by:	Atheros Communications, Inc.
2010-08-09 17:28:08 +00:00
yongari
08ccc1c1b2 Cache PCIY_PMG and PCIY_EXPRESS capability pointer to softc and use
it instead of calling pci_find_extcap().
2010-08-08 00:43:41 +00:00
yongari
ae142ea6e9 Remove unnecessary assignment. 2010-08-08 00:23:36 +00:00
yongari
0eb991b7bb Always disable ASPM L0s and enable L1 before entering into WOL
suspend state.  Also disable master clock after PHY power down,
this is supposed to save more power. The master clock should be
enabled if WOL is active.
2010-08-08 00:12:31 +00:00
yongari
b67da7a96f Do not touch CMB TX threshold register when CMB is not used.
Note, alc(4) does not use CMB at all due to silicon bug.
2010-08-07 23:41:46 +00:00
yongari
b1b42e7623 Controller does not seem to support more than 1024 bytes DMA burst.
Limit DMA burst size to be less than or equal to 1024 bytes.
2010-08-07 23:33:06 +00:00
yongari
c1b8358998 Reduce Tx interrupt moderation timer from 50ms to 1ms. The default
value resulted in poor performance for UDP packets. With this
change, UDP bulk transfer performance is more than 940Mbps.

While I'm here fix a wrong register definition.
2010-08-06 00:50:16 +00:00
yongari
66db61c8c0 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
yongari
79836e2e58 Remove Tx mbuf parsing code for VLAN in TSO path. Controller does
not support TSO over VLAN if VLAN hardware tagging is disabled so
there is no need to check VLAN here.
2010-02-22 23:35:35 +00:00
yongari
21b36471d3 Add TSO support on VLANs. Also make sure to update TSO capability
whenever jumbo frame is configured.
While I'm here remove unnecessary check of VLAN hardware checksum
offloading. vlan(4) already takes care of this.
2010-02-22 22:41:27 +00:00
yongari
b9dd684580 Fix multicast handling. All Atheros controllers use big-endian form
in computing multicast hash.

PR:	kern/139137
2009-09-29 23:03:16 +00:00
yongari
beb5c5d2db For AR8132 fast ethernet controller, do not report 1000baseT
capability to mii(4). Even though AR8132 uses the same model/
revision number of F1 gigabit PHY, the PHY has no ability to
establish 1000baseT link. I have no idea why Atheros use the same
device/model id for this PHY.
With this change atphy(4) does not report 1000baseT media
capability and manual 1000baseT configuration is also disabled
which is more desirable behavior for 10/100Mbps PHY.
2009-09-28 22:18:38 +00:00
yongari
8582cb4b0d Don't try to power down PHY when alc(4) failed to map the device.
This fixes system crash when mapping alc(4) device failed in device
attach.

Reported by:	Jim < stapleton.41 <> gmail DOT com >
MFC after:	3 days
2009-08-24 20:37:15 +00:00
kevlo
ee695c0b4b Free allocated Rx ring dma memory/tags.
Reviewed by: yongari@
Approved by: re (kib)
2009-07-31 09:57:42 +00:00
rwatson
be5740a255 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
yongari
c9be81a520 Add alc(4), a driver for Atheros AR8131/AR8132 PCIe ethernet
controller. These controllers are also known as L1C(AR8131) and
L2C(AR8132) respectively. These controllers resembles the first
generation controller L1 but usage of different descriptor format
and new register mappings over L1 register space requires a new
driver. There are a couple of registers I still don't understand
but the driver seems to have no critical issues for performance and
stability. Currently alc(4) supports the following hardware
features.
  o MSI
  o TCP Segmentation offload
  o Hardware VLAN tag insertion/stripping
  o Tx/Rx interrupt moderation
  o Hardware statistics counters(dev.alc.%d.stats)
  o Jumbo frame
  o WOL
AR8131/AR8132 also supports Tx checksum offloading but I disabled
it due to stability issues. I'm not sure this comes from broken
sample boards or hardware bugs. If you know your controller works
without problems you can still enable it. The controller has a
silicon bug for Rx checksum offloading, so the feature was not
implemented.
I'd like to say big thanks to Atheros. Atheros kindly sent sample
boards to me and answered several questions I had.

HW donated by:	Atheros Communications, Inc.
2009-06-10 02:07:58 +00:00