Remove the now obsolete vnet_state field. This greatly simplifies the
detection of VNET shutdown and avoids code duplication.
Discussed with: bz@
MFC after: 1 week
Sponsored by: Mellanox Technologies
The compatibility code for the atomic operations in ZFS code is a bit
messy. In some cases the native definitions are directly made
available, in some cases there are emulated operations in
opensolaris_atomic.c and in yet other cases there are atomic operations
implemented in assembly that were obtained from OpenSolaris / illumos.
This commit adds atomic_swap_64 for use with i386 userland.
The code is copied from illumos.
I am not sure why FreeBSD does not provide that operation natively.
Maybe because we try (or pretend) to support processors that did not
have the necessary instructions.
While here I also added atomic_load_64 for the same reasons.
This is original code based on iilumos atomic_swap_64 and FreeBSD
atomic_load_acq_64_i586.
Pointyhat to: avg
MFC after: 1 week
8423 8199 7432 Implement large_dnode pool feature
7432 Large dnode pool feature
8199 multi-threaded dmu_object_alloc()
8423 Implement large_dnode pool feature
10406 large_dnode changes broke zfs recv of legacy stream
llumos/illumos-gate@54811da5ac54811da5achttps://www.illumos.org/issues/8423https://www.illumos.org/issues/8199https://www.illumos.org/issues/7432illumos/illumos-gate@811964cd9f811964cd9fhttps://www.illumos.org/issues/10406
ZoL issues:
Improved dnode allocation #6564
Clean up large dnode code #6262
Fix dnode_hold() freeing dnode behavior #8172
Fix dnode allocation race #6414, #6439
Partial: Raw sends must be able to decrease nlevels #6821, #6864
Remove unnecessary txg syncs from receive_object() Closes#7197
This updates FreeBSD large_dnode code (that was imported from ZoL) to a
version that was committed to illumos. It has some cleanups,
improvements and fixes comparing to what we have in FreeBSD now.
I think that the most significant update is 8199 multi-threaded
dmu_object_alloc().
This commit reverts r351077 that was a revert of r351074 and r351076 and
restores those changes. Required atomic operations should be available
now on all platforms where we build ZFS.
Obtained from: illumos
MFC after: 3 weeks
DTS Import of Linux 5.3 added a patch that rework the L3 mmc instance
in the AM335x SoC but removed the status = 'disabled' on the node.
This cause the kernel to probe the device even if the board doesn't
have this mmc used and since we don't correctly activate the clock
for this module we panic with an external data abort.
Beaglebone(s) don't have this device anyway so simply disabling it.
Patch for the DTS was sent upstream.
https://patchwork.kernel.org/patch/11176921/
PR: 241089
Reported by: phk
Previously, the code used a plain store on platforms that lacked
atomic_swap_64 and possibly some other platforms as the condition worked
only if atomic_swap_64 was a macro.
MFC after: 1 week
X-MFC after: r353166, r353167
Some 32-bit platforms do not provide 64-bit atomic operations that ZFS
requires, either in userland or at all. We emulate those operations for
those platforms using a mutex. That is not entirely correct and it's
very efficient. Besides, the loads are plain loads, so torn values are
possible.
Nevertheless, the emulation seems to work for some definition of work.
This change adds atomic_swap_64, which is already used in ZFS code, and
atomic_load_64 that can be used to prevent torn reads.
MFC after: 1 week
According to ian, the only armv6 cpu we support is the 1176, so this
change is effectively a no-op.
The change is just to make the code more self-consistent.
The issue was noticed by a standalone module build for armv6.
Reviewed by: ian
MFC after: 3 weeks
This was committed due to what was later diagnosed as an msdosfs bug
preventing in-place strip. This bug was fixed in r352564, and we agreed to
keep the workaround in for a bit to allow the driver fix a suitable amount
of propagation time for folks building/installing powerpc/ubldr, seeing as
how we were not in any hurry to revert.
Logic was backwards. The function returns true if it *is* running as a
hypervisor, whereas we want to only call the CAS utility if we're running as a
guest.
Reported by: Shawn Anastasio <shawn@anastas.io>
no longer worked. The problem was that the defines used the
same space as the VLAN id. This commit does three things.
1) Move the LRO used fields to the PH_per fields. This is
safe since the entire PH_per is used for IP reassembly
which LRO code will not hit.
2) Remove old unused pace fields that are not used in mbuf.h
3) The VLAN processing is not in the mbuf queueing code. Consequently
if a VLAN submits to Rack or BBR we need to bypass the mbuf queueing
for now until rack_bbr_common is updated to handle the VLAN properly.
Reported by: Brad Davis
Root vnodes looekd up all the time, e.g. when crossing a mount point.
Currently used routines always perform a costly lookup which can be
trivially avoided.
Reviewed by: jeff (previous version), kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21646
The current 256-lock sized array is a problem in the following ways:
- it's way too small
- there are 2 locks per cacheline
- it is not NUMA-aware
Solve these issues by introducing per-superpage locks backed by pages
allocated from respective domains.
This significantly reduces contention e.g. during poudriere -j 104.
See the review for results.
Reviewed by: kib
Discussed with: jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21833
As pointed out by mjg, without the parentheses the calculations done against
these macros are incorrect, resulting in only 1/3 of locks being used.
Reported by: mjg
Since local UEFI console is implemented on top of framebuffer,
we need to avoid redrawing the whole screen ourselves, but let
Simple Text Mode to do the scroll for us.
that this path is taken by setting the tail pointer correctly.
There is still bug related to handling unordered unfragmented messages
which were delayed in deferred handling.
This issue was found by OSS-Fuzz testing the usrsctp stack and reported in
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17794
MFC after: 3 days
Diff partially stolen from CheriBSD; these bits need -Wl,-z,notext in order
to build in an LLVM world. They are needed for all flavors/sizes of MIPS.
This will eventually get fixed in LLVM, but it's unclear when.
Reported by: arichardson, emaste
Differential Revision: https://reviews.freebsd.org/D21696
At least some of the characters in E000-F8FF range are used by Powerline
fonts, and having no attributes for these ranges in UnicodeData.txt
other than "Other, Private Use" it should be safe to mark all of them as
printable. Some actually were before r340491, so this fixes the
regression introduced there as well.
PR: 240911
Reviewed by: bapt
Tested by: Daniel Ponte <amigan@gmail.com>
Differential Revision: https://reviews.freebsd.org/D21850
SI_CHEAPCLONE was introduced in r66067 for use with cloned bpfs. It was
later also used in tty, tun, tap at points. The rough timeline for being
removed in each of these is as follows:
- r181690: bpf switched to use cdevpriv API by ed@
- r181905: ed@ rewrote the TTY later to be mpsafe
- r204464: kib@ removes it from tun/tap, declaring it unused
I've not yet been able to dig up any other consumers in the intervening 9
years. It is no longer set on any devices in the tree and leaves an
interesting situation in make_dev_sv where we're ok with the device already
being set SI_NAMED.
Attempting to initialize si_drv{1,2} with mda_si_drv{1,2} does not work if
you are operating on cloned devices.
clone_create must be called prior to the make_dev* family to create/return
the device on the clonelist as needed. This device is later returned early
in newdev(), prior to si_drv{0,1,2} initialization.
This patch simply breaks out of the loop if we've found a device and
finishes init.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21904
The one used previously was missing the characters in 0-127 range,
making various tools try to escape them in output.
PR: 235100
Reviewed by: bapt
Tested by: Ting-Wei Lan <lantw44@gmail.com>
Differential Revision: https://reviews.freebsd.org/D21794
vn_write already checks for vnode type to see if bwillwrite should be called.
This effectively reverts r244643.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21905
We only support host mode so those functions are just added so
we won't panic when generic-{e,o}hci will set the phy to host mode.
MFC after: 1 month
X-MFC-With: r353062
* Remove zpool_create_013_neg. FreeBSD doesn't have an equivalent of
Solaris's metadevices. GEOM would be the equivalent, but since all geoms
are the same from ZFS's perspective, this test would be redundant with
zpool_create_012_neg
* Remove zpool_create_014_neg. FreeBSD does not support swapping to regular
files.
* Remove zpool_create_016_pos. This test is redundant with literally every
other test that creates a disk-backed pool.
* s:/etc/vfstab:/etc/fstab in zpool_create_011_neg
* Delete the VTOC-related portion of zpool_create_008_pos. FreeBSD doesn't
use VTOC.
* Replace dumpadm with dumpon and swap with swapon in multiple tests.
* In zpool_create_015_neg, don't require "zpool create -n" to fail. It's
reasonable for that variant to succeed, because it doesn't actually open
the zvol.
* Greatly simplify zpool_create_012_neg. Make it safer, too, but not
interfering with the system's regular swap devices.
* Expect zpool_create_011_neg to fail (PR 241070)
* Delete some redundant cleanup steps in various tests
* Remove some unneeeded ATF timeout specifications. The default is fine.
PR: 241070
MFC after: 2 weeks
Sponsored by: Axcient
CTLFLAG_STATS identifies a sysctl OID as statistical or informational,
as opposed to a configurable/tunable OID that changes behavior.
This can be used, for example, to verfiy that the kyua tests do not
modify configurable OIDs when allow_sysctl_side_effects is true.
Add CTLFLAG_STATS to all COUNTER_U64* OIDs.
I will add the flag to more OIDs in a few subsequent commits, to
facilitate MFC. The flag should be added to many more OIDs. I plan to
add it those that my test found and some nearby that looked obvious.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
nvdimm_e820 is a newbus pseudo driver that looks for "legacy" e820 PRAM
spans and creates ordinary-looking SPA devfs nodes for them
(/dev/nvdimm_spaN).
As these legacy regions lack real NFIT SPA regions and namespace
definitions, they must be administratively sliced up externally using
device.hints. This is similar in purpose to the Linux memmap= mechanism.
It is assumed that systems with working NFIT tables will not have any use
for this driver, and that that will be the prevailing style going forward,
so if there are no explicit hints provided, this driver does not
automatically create any devices.
Reviewed by: kib (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21885
The registers in ilumos and FreeBSD have a different number.
In the illumos, last 32-bits register defined is SS an in FreeBSD is GS.
While translating register we should comper it to the highest one.
PR: 240358
Reported by: lwhsu@
MFC after: 2 weeks
Realistically, this cannot work. We don't allow the tun to be opened twice,
so it must be done via fd passing, fork, dup, some mechanism like these.
Applications demonstrably do not enforce strict ordering when they're
handing off tun devices, so the parent closing before the child will easily
leave the tun/tap device in a bad state where it can't be destroyed and a
confused user because they did nothing wrong.
Concede that we can't leave the tun/tap device in this kind of state because
of software not playing the TUNSIFPID game, but it is still good to find and
fix this kind of thing to keep ifconfig(8) up-to-date and help ensure good
discipline in tun handling.
MFC after: 3 days
This directory is actually needed during make installworld and will prevent
to reinstall a system after make delete-old is done.
PR: 226137
Reported by: rakuco
MFC after: 3 days