This reverts commit aa37baf3d7.
The reverted commit was motivated by a problem observed on stable/12,
but it turns out that a better solution was committed in r348309 but not
MFCed. So, revert this change since it is unnecessary and not really
correct: it assumes that the order in which module metadata records is
defined determines their order in the output linker set. While this
seems to hold in my testing, it is not guaranteed.
Reported by: cem
Discussed with: imp
MFC after: 3 days
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
devctl_notify_f isn't needed, so retire it. The flags argument is now
unused, so rather than keep it around, retire it. Convert all old
users of it to devctl_notify(). This path no longer sleeps, so is safe
to call from any context. Since it doesn't sleep, it doesn't need to
know if it is OK to sleep or not.
Reviewed by: markj@
Differential Revision: https://reviews.freebsd.org/D26140
Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is (due to the size of the patch) only the initial (minimum) version.
It will be updated/expanded with a subsequent set of particular patches.
This patch is also not tested on OMAP4 based boards (BeagleBone),
so all possible issues should be (and will be) fixed by ASAP once
identified.
Submited by: Oskar Holmlund (oskar.holmlund@ohdata.se)
Differential Revision: https://reviews.freebsd.org/D25118
Honor ti,pmic-shutdown-controller option in DTS
Tested on stable r359316 @ Sleep mode on custom hw, Power off on BBB and PB
OFF bit [1] in status register control the pmic behaviour when PWR_EN pin
is pulled low.
On most AM335x hardware [beaglebone *] the desired behaviour are in fact
power off due to some hardware designs - read more in the comments around
pmic in sys/gnu/dts/arm/am335x-bone-common.dtsi
This patch let the device-tree decide with ti,pmic-shutdown-controller[2]
the state of off bit in status register.
[1] 8.6.12 table 12 http://www.ti.com/lit/ds/symlink/tps65217.pdf
[2] Documentation/devicetree/bindings/regulator/tps65217.txt
PR: 245159
Submitted by: Oskar Holmlund <oskar.holmlund@ohdata.se>
MFC after: 2 weeks
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
As far as I can tell, these are an artifact of times when linker sets
couldn't be empty, otherwise the kernel build would fail due to unresolved
symbols. hselasky fixed this in r268138, and I've audited the kbd portions
to make sure nothing would blow up due to the empty linker set and
successfully compiled+ran a kernel with no keyboard support at all.
Kill them off now since they're no longer required.
MFC after: 1 week
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
in this driver indicate that the SD_CAPA register is write-once and after
being set one time the values in it cannot be changed. That turns out not
to be the case -- the values written to it survive a reset, but they can
be rewritten/changed at any time.
should be) correct, they lead to the eMMC on a Beaglebone failing to work
in some situations.
The TI sdhci hardware is kind of strange. The first device inherently
supports 1.8v and 3.3v and the abililty to switch between them, and the
other two devices must be set to 1.8v in the sdhci power control register to
operate correctly, but doing so actually makes them run at 3.3v (unless an
external level-shifter is present in the signal path). Even the 1.8v on the
first device may actually be 3.3v (or any other value), depending on what
voltage is fed to the VDDS1-VDDS7 power supply pins on the am335x chip.
Another strange quirk is that the convention for am335x sdhci drivers in
linux and uboot and the am335x boot ROM seems to be to set the voltage in
the sdhci capabilities register to 3.0v even though the actual voltage is
3.3v. Why this is done is a complete mystery to me, but it seems to be
required for correct operation.
If we had complete modern support for the am335x chip we could get the
actual voltages from the FDT data and the regulator framework. But our
am335x code currently doesn't have any regulator framework support.
Reverting to the prior code will get the popular Beaglebone boards working
again.
This is part of the fix for PR 241301, but also requires r353651 for a
complete fix.
PR: 241301
Discussed with: manu
that makes the upstream FDT data work right, so we don't need to see a
couple dozen instances of it spam the dmesg at boot time unless it's a
verbose boot.
ioctl(2) handling. This allows doing the pps_event() work in the polling
routine, instead of using a taskqueue task to do that work.
Also, add PNPINFO, and switch to using make_dev_s() to create the cdev.
Using a spin mutex and calling pps_event() from the polling function works
around the situation which requires more than 2 sets of timecounter
timehands in a single-core system to get reliable PPS capture. That problem
would happen when a single-core system is idle in cpu_idle() then gets woken
up with an event timer event which was scheduled to handle a hardclock tick.
That processing path would end up calling tc_windup 3 or 4 times between
when the tc polling function was called and when the taskqueue task would
eventually run, and with only two sets of timehands, the th_generation count
would always be too old to allow the captured PPS data to be used.
ti,dual-volt property say that the eMMC support 1.8V and 3.3V not 3.0V
Use the correct caps for the mmc stack.
Note that the MMCHS_SD_CAPA register can only be written once after bootup
so if one is using a u-boot compiled with eMMC support (this is the default)
this code is a no-op but just in case someone have u-boot compiled without
eMMC support this make eMMC works when the kernel is booted.
MFC after: 1 week
status register clears pending interrupts. By moving that code out of the
interrupt handler into a taskqueue task, I effectively created an interrupt
storm by returning from the handler with the interrupt source still active.
We'll have to find a different solution for this driver's need to sleep
in an ithread context.
Long ago this was needed, but now low-level i2c controller drivers cleverly
defer attachment of the bus until interrupts are enabled (if they require
interrupts to function), so that every i2c slave device doesn't have to.
Since DTS from >= Linux 5.0 the slave address are relative to the parent
node address and aren't the full ones.
Check both so the cpsw driver can find the phy id.
r350229 changed the code to lookup the ti,hwmods property in the parent
as it's now like that in the DTS from >= Linux 5.0, allow the property
to be also in the node itself so we can boot with an older DTB.
Reported by: "Dr. Rolf Jansen" <rj@obsigna.com>
pwm(9), but also maintains the historical sysctl config interface for
compatiblity with existing apps. The two config systems are not compatible
with each other; if you use both interfaces to change configurations you're
likely to end up with incorrect output or none at all.
upcoming functional changes.
Add an ofw_compat_data table for probing compat strings, and use it to add
PNP data. Remove some stray semicolons at the end of macro definitions,
and add a PWM_LOCK_ASSERT macro to round out the usual suite. Move the
device_t and driver_methods structs to the end of the file. Tweak comments.
pollution that was cleaned up recently, and this file got missed in the
cleanup because it's not attached to the build unless you specifically
request this device in a custom kernel config.
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
In r337703 DTS files were updated to Linux 4.18, including Linux commit
4d8b032d3c03f4e9788a18bbb51b10e6c9e8a56b which removed the `phy_id`
property from am335x-bone-common (as the property was deprecated).
Use `phy-handle` via fdt_get_phyaddr, keeping the existing code as a
fallback for old DTBs.
PR: 236624
Submitted by: manu, Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: Gerald Aryeetey
Reviewed by: manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19814
front-end doesn't support SDMA or the latter implements a platform-
specific transfer method instead. While at it, factor out allocation
and freeing of SDMA resources to sdhci_dma_{alloc,free}() in order to
keep the code more readable when adding support for ADMA variants.
o Base the size of the SDMA bounce buffer on MAXPHYS up to the maximum
of 512 KiB instead of using a fixed 4-KiB-buffer. With the default
MAXPHYS of 128 KiB and depending on the controller and medium, this
reduces the number of SDHCI interrupts by a factor of ~16 to ~32 on
sequential reads while an increase of throughput of up to ~84 % was
seen.
Front-ends for broken controllers that only support an SDMA buffer
boundary of a specific size may set SDHCI_QUIRK_BROKEN_SDMA_BOUNDARY
and supply a size via struct sdhci_slot. According to Linux, only
Qualcomm MSM-type SDHCI controllers are affected by this, though.
Requested by: Shreyank Amartya (unconditional bump to 512 KiB)
o Introduce a SDHCI_DEPEND macro for specifying the dependency of the
front-end modules on the sdhci(4) one and bump the module version
of sdhci(4) to 2 via an also newly introduced SDHCI_VERSION in order
to ensure that all components are in sync WRT struct sdhci_slot.
o In sdhci(4):
- Make pointers const were applicable,
- replace a few device_printf(9) calls with slot_printf() for
consistency, and
- sync some local functions with their prototypes WRT static.
Same as r333305, with Linux 4.17 dts the compatible for the prcm added
'simplebus', it mean that the simplebus driver will attach to it
at the BUS_PASS_BUS pass.
Change the pass for the prcm driver to be at BUS_PASS_BUS so we will win
the attach.
This introduce a problem as this driver needs the omap_scm one to be already
attached. omap_scm also attach at BUS_PASS_BUS but after the prcm one as it is
after in the dtb and the simplebus driver simpy walk the tree to attach it's
children.
Use the bus_new_pass method to defer the frequencies read at BUS_PASS_TIMER.
This fixes booting on pandaboard
Approved by: re (rgrimes)
With Linux 4.17 dts the compatible for the prcm added 'simplebus' we mean
that the simplebus driver will attach to it at the BUS_PASS_BUS pass.
Change the pass for the prcm driver to be at BUS_PASS_BUS so we will win
the attach.
This introduce a problem as this driver needs the ti_scm one to be already
attached. ti_scm also attach at BUS_PASS_BUS but after the prcm one as it is
after in the dtb and the simplebus driver simpy walk the tree to attach it's
children.
Use the bus_new_pass method to defer the frequencies read at BUS_PASS_TIMER.
This fixes booting on BeagleBone*
Reported by: many
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14645
