already found in the sigaction(2) manual.
As discussed with the committer of that delta, cross-reference the list
in sigaction(2) instead of duplicating the list of functions that are
safe for use within signal handlers.
Clarify that if strlcat() does not find a NUL within siz byte it
will not NUL terminate either.
Document boundary condition when size < strlen(dst).
"of", not "on" (from Henric Jungheim)
Obtained from: OpenBSD
MFC After: 1 week
Previously, some useful xrefs were missing.
Now each of the pages refers to all remaining section 2 pages,
to the kld(4) page, and to a related utility's (section 8) page.
change the name of the page (.Nm) from "kldstat" to "modstat".
Second, don't claim that modstat(2) always returns 0. Actually,
it behaves as most syscalls do - returns 0 on success, or -1
on failure.
MFC after: 5 days
whether or not connect(2) is used for UDP client sockets. The default
is not to connect(), so existing clients will see no change in
behaviour.
The use of connect(2) for UDP clients has a number of advantages:
only replies from the intended address are received, and ICMP errors
pertaining to the connection are reported back to the application.
and its associated constants. Implement _SC_IOV_MAX in the usual way.
Be a bit sloppy about the namespace question; this should get cleared up
in time for 5.0.
MFC after: 1 month
of calling sigprocmask(). This matches the behaviour of thr_sigsetmask()
on Solaris; _pthread_sigmask_stub was added purely for compatibility
with Solaris (for TI-RPC), so it might as well do the same thing.
This fixes the problem where client RPC calls ignored all signals
for the complete duration of the RPC. This behaviour is currently
necessary in the threaded case due to locking issues, but was never
intended to occur in non-threaded programs.
Reviewed by: deischen
IPv6 transport-ready resolvers/DNS servers. Need careful configuration
when enable it. (default config is not affected).
See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be
called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
data pointer. This bug has been here since the ti-rpc import; it
apparently broke the clnt_control CLGET_SVC_ADDR options.
PR: misc/27813
Submitted by: Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
there and compare the inode and device numbers to the values we remember,
to guard against the directory having been moved around in the meantime.
Reported by: Nick Cleaton <nick@cleaton.net>
Tor created a while ago, removes the raw I/O piece (that has cache coherency
problems), and adds a buffer cache / VM freeing piece.
Essentially this patch causes O_DIRECT I/O to not be left in the cache, but
does not prevent it from going through the cache, hence the 80%. For
the last 20% we need a method by which the I/O can be issued directly to
buffer supplied by the user process and bypass the buffer cache entirely,
but still maintain cache coherency.
I also have the code working under -stable but the changes made to sys/file.h
may not be MFCable, so an MFC is not on the table yet.
Submitted by: tegge, dillon
accidentally clobber the server address if a stray packet arrived
at the client port. This would result in any further retransmits
going to the wrong address.
For now, fix this by not saving the source address of the reply; this
matches the pre-tirpc behaviour.
history info as:
: .Sh STANDARDS If the command, library function or file adheres to a
: specific implementation such as IEEE Std 1003.2
: (``POSIX.2'') or ANSI X3.159-1989 (``ANSI C'') this
: should be noted here. If the command does not adhere
: to any standard, its history should be noted in the
: HISTORY section.
terminates the string in all cases, based on code from netstat(1).
The path in a sockaddr_un is terminated either by a '\0', or by
the end of the sockaddr as defined by sun_len.
Previously, the code could write the "safety" '\0' beyond the end
of the sockaddr (sockaddr_un's need only be large enough to store
sun_len bytes), and writing into the the supplied sockaddr is bad
anyway.
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
address" string to a netbuf/sockaddr "transport address". In the
case of an AF_LOCAL address, it was missing the code to actually
point the netbuf at the newly allocated sockaddr_un, so the caller
ended up with a netbuf containing junk.
Submitted by: Martin Blapp <mb@imp.ch>
required by POSIX.1e. This maintains the current 'struct acl'
in the kernel while providing the generic external acl_t
interface required to complete the ACL editing library.
o Add the acl_get_entry() function.
o Convert the existing ACL utilities, getfacl and setfacl, to
fully make use of the ACL editing library.
Obtained from: TrustedBSD Project
arguments where the format string is obtained from user data, or
otherwise difficult to verify statically.
Example usage:
printf(fmtcheck(user_format, standard_format), arg1, arg2);
checks the format string user_format for consistency (same number/order/
type of format operators) with standard_format. If they differ,
standard_format is used instead to avoid potential crashes or security
violations.
Obtained from: NetBSD
Reviewed by: -arch
instead of #pragma weak to create weak definitions. This macro is
improperly named, though, since a weak definition is not the same
thing as a weak reference.
Suggested by: bde
than the default buffer size in the old RPC code (8800 bytes), and
it could not be overriden by the application. This caused problems
with CFS (/usr/port/security/cfs).
Change this default back to UDPMSGSIZE (8800 bytes), but more
importantly, allow applications to use larger message sizes for
all protocols if desired. Choose an arbitrary maximum message size
of 256k instead of using the default as the maximum (which is
silly).
Reported by: ache
Reviewed by: alfred, Martin Blapp <mb@imp.ch>
functions.
- Place the acl_dup() description in alphabetical order.
- Move the POSIX.1e descriptions under the ENVIRONMENT section to the
STANDARDS section.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
Makefile, add Makefile.inc needed for libc build; add
#include "namespace.h"/#include "un-namespace.h" pairs around the
includes of sys/acl.h and sys/capability.h, and an additional underscore
in front of the functions that will be overridden in libc_r.
Approved by: rwatson
Obtained from: TrustedBSD Project
`nc_error' variables. Move the nc_lock mutex from mt_misc.c to a
static variable within this function, since it is only used here.
Add a new getnetconfigent() error code `NC_NOTFOUND' to report the
case where the specified netid was not found. Set nc_error in all
error cases in getnetconfigent() so that the error messages returned
by nc_(s)perror are always meaningful.
Add a terminating \n to the output of nc_perror() to match both
our manpage and other implementations of this function.
Reviewed by: deischen, alfred, Martin Blapp <mb@imp.ch>
RPC clients hanging. The real problem turned out to be missing
cleanup code; this was fixed in clnt_vc.c r1.5 and clnt_dg.c r1.4.
Submitted by: Martin Blapp <mb@imp.ch>
so that the underscored versions of the pthread functions get
declared. This removes around 300 lines of 'implicit declaration
of XXX' warnings from the output of a libc build with -Wall.
Reviewed by: Martin Blapp <mb@imp.ch>, alfred
I've left out a couple of unused args between internal functions.
Use MAXPATHLEN, not MAXPATHLEN + 1 in a couple of places.
Pass a pointer to the end of the target filename space.
exactly the right size. Do it differently - pass a length rather than an
end-of-string+1 pointer as this is more convenient anyway. Get rid of
the bogus +1's.
to make asynchronous RPCs. This is needed to help fix ypbind, which can no
longer override the clnt_dg_call() method (formerly the clntudp_call()
method) due to all the internal descriptor locking code in TI-RPC. Turning
on this flag allows us to send an RPC request, then return immediately,
and handle a reply later, rather than being forced to do the request
and reply in a single function call.
Also fix a byte ordering bug: when clnt_dg_call() increments the XID
prior to transmitting a request, it uses the raw value, which is wrong.
The XID is stored in network byte order, i.e. big-endian. The CLSET_XID
and CLGET_XID commands in clnt_dg_control() use ntohl()/htonl() to get
the byte ordering right, but because clnt_dg_call() does not do this,
using CLSET_XID/CLGET_XID doesn't actually work, unless you're on a
big endian host, which we aren't (yet). Fix clnt_dg_call() to byte swap
properly when doing the increment.
o Revise description in light of commits over last month including:
- ACL editing library is now implemented
- ACLs are now implemented
Obtained from: TrustedBSD Project
because libc/rpc/key_call.c references uname(), and ps/print.c also
defines uname(), and ps is linked statically. This leads to a symbol
clash. The userland uname(3) kinda sucked anyway as the hostname
etc was too short. And since the libc rpc interface now uses
the utsname.nodename which gets truncated, I was tempted into doing
something about it. Create a new userland uname function, called
__xuname() which takes an extra argument that allows you to change
the size of the fields. uname() becomes a static inline function
in sys/utsname.h that passes the extra argument in. struct utsname
has its field members expanded by default now in userland.
We still provide a 'uname' externally linkable function for things
that either think that they ``know'' the utsname format and assume
32 character strings and bypass the include file, or objects that
are linked against old libcs. ie: just about every plausible
case that I can think of is covered. Should we ever change the
default lengths again, a libc major bump should not be required
as the size is now passed to the function.
XXX the uname(2) in the kernel is for FreeBSD 1.1 binary compatability!
All the uname(3) functions that are exported to userland are actually
implemented in libc with sysctl. uname(1) uses sysctl directly and
does not call uname(3).
PR: bin/4688
acl_add_perm, acl_clear_perms, acl_copy_entry, acl_create_entry,
acl_delete_perm, acl_get_permset, acl_get_qualifier, acl_get_tag_type,
acl_set_permset, acl_set_qualifier, acl_set_tag_type
This brings us within 4 functions of a full ACL editing library.
Reviewed by: rwatson
Make struct cmessage visible from socket.h (about 4 places were
defining it for themselves which wasn't good)
Make __rpc_get_local_uid() useable and give it prototype that's
visible.
Fix some issues with printing out usernames from rpcbind and keyserv.
