This change adds some sample test cases to share/examples/tests/
demonstrating the basic usage of the atf and plain interfaces.
These test programs are fully-functional and are installed as part
of the test suite, which guarantees that the sample code remains
correct. However, they currently mostly serve as a placeholder for
additional examples and may be incomplete (depending on how you
look at them). I will see what else can be useful while working on
documentation.
As a bonus, the addition of these tests exercise the *.test.mk files,
one of which (plain.test.mk) was not yet in use, and also demonstrates
that it's possible to mix different kinds of test programs into the
same test suite.
Approved by: rpaulo (mentor)
SRCS.<prog> must be explicitly defined when using the PROGS* functionality
for each program to be built.
As there are no plain test programs in the system yet, this was not
detected.
Approved by: rpaulo (mentor)
C++ programs need to be added to PROGS_CXX, not PROGS, and the code was
actually doing both. Just keep the registration into PROGS_CXX to
prevent possible obscure build problems.
Approved by: rpaulo (mentor)
It was not being correctly copied into the kernel on FreeBSD, and as a
result, probes with multiple probe sites were not being created properly.
To fix this, change the ioctl definition so that the fasttrap ioctl handler
is responsible for copying in userland data.
Submitted by: Prashanth Kumar <pra_udupi@yahoo.co.in>
MFC after: 1 month
This is because the atf vendor branch now includes a verbatim copy of
the distfile sources. As a result, the list of files to-be-removed from
the contrib/ directory is now more aggressive (and different) and the
upgrade notes now only describe stuff that is specific to the atf import
and is not documented in the Subversion Primer.
Approved by: rpaulo (mentor)
When building various programs from a single Makefile, program-specific
variables are of the form <VAR>.<PROG>, not <VAR>_<PROG>. Fix this
obvious typo to fix the build when WITH_TESTS=yes.
I am not sure how this ever worked before given that manual inspection
of bsd.progs.mk clearly shows that the expected character between the
two components is a dot and not an underscore... but I suspect the
changes in r258095 exposed this oddity.
Approved by: rpaulo (mentor)
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
Per POSIX, si_status should contain the value passed to exit() for
si_code==CLD_EXITED and the signal number for other si_code. This was
incorrect for CLD_EXITED and CLD_DUMPED.
This is still not fully POSIX-compliant (Austin group issue #594 says that
the full value passed to exit() shall be returned via si_status, not just
the low 8 bits) but is sufficient for a si_status-related test in libnih
(upstart, Debian/kFreeBSD).
PR: kern/184002
Reported by: Dmitrijs Ledkovs
Tested by: Dmitrijs Ledkovs
On some machines (G5 with lots of RAM), entering OF sometimes causes the
machine to hang. Once the machine is booted, currently the only entry point
into OF is through resetting the framebuffer on mode switch on these machines.
Disabling this allows the machine to stay up at the expense of less usable
consoles after X is started.
MFC after: Never, this is only a hack
some comment I wrote about these values "lying" in the negative diff, which
referes to an earlier misunderstanding about which node to read them from.
This gets at least the PPC64 kernel booting in the mac99 system model in
QEMU after bypassing the MacIO ATA driver, which apparently still has
problems.
conditionally include (but ignore failures) /boot/loader.rc.local and
/boot/menu.rc.local -- to make customizing the menu easier.
Reviewed by: alfred
Discussed on: -hackers
errors on re-entry for physical media). Also, while we're here, stop
ejecting the CDROM when we're done with it (but leave the functions for
later use so that we could perhaps -- from the installer standpoint -- use
it to eject the media after an install).
MFC after: 3 days
fix a bug where "pkg update" was not getting the value of PACKAGESITE.
NB: PACKAGESITE needs to be explicitly exported in support of children.
MFC after: 3 days
This fixes DPMS with KDE and radeonkms. Without this, the display would
freeze when the monitor is put into sleep state, and only resumes after
several dozens of minutes once the monitor is powered on again.
Tested by: Mathias Picker <Mathias.Picker@virtual-earth.de>
allows FPU emulation on AIM as well as providing support for the mfpvr
and lwsync instructions from userland on e500 cores. lwsync, in particular,
is required for many C++ programs to work correctly.
MFC after: 1 week
the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state
structure in the PCB is valid. This separation reflects the situation on
FPU-less systems in which the FP state is used by the emulator but we don't
actually want to try to turn on the non-existant FPU.
Use this flag to save and restore FP regs properly on both AIM and Book-E.
As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such
abilities except for a trap handler to call enable_fpu()/enable_altivec().
already valid metadata found at the new location. This should allow easy
transparent recovery if first resize was done by mistake.
While there, unify metadata write code and fix minor memory leak.
MFC after: 1 month
it never did -- and fix an obvious missing line. Floating point emulation
on Book-E still needs some work but this gets it basically functional on
soft-FPU systems (hard FPU for Book-E is not yet implemented).
MFC after: 1 week
it more flexible about how the CCSR range is found. With this change, the
stock MPC85XX will boot on a Routerboard 800.
Hardware donated by: Benjamin Perrault
Experimental version released on November 16th, 2013.
* Issue 45: Added require.memory support in atf-run for FreeBSD.
* Fixed an issue with the handling of cin with libc++.
* Issue 64: Fixed various mandoc formatting warnings.
* X-NetBSD-PR bin/48284: Made atf-check flush its progress message to
stdout so that an interrupted test case always shows the last message
being executed.
* X-NetBSD-PR bin/48285: Fixed atf_check examples in atf-sh-api(3).
Approved by: rpaulo (mentor)
This is to ensure that test-related directories don't get needlessly
created (and later deleted) when MK_TESTS=no.
Problem found by jhb@.
Approved by: rpaulo (mentor)
