263030, 263033, 263034, 263056, 263057,
Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.
Remove all traces of support for ARM chips prior to the arm9 series.
Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).
Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.
Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.
Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.
Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.
Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.
Remove some unnecessary indirection and jump right to the handler functions.
Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).
Remove the unreferenced DATA() macro.
Remove #include <machine/asmacros.h> from files that don't need it.
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375
Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.
In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0
In pmap_mapdev(), first check whether a static mapping exists,
Convert TI static device mapping to use the new arm_devmap_add_entry(),
Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.
Eliminate use of fdt_immr_addr(), it's not needed for tegra
Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.
Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.
Add #include <machine/fdt.h> to a few files that used to get it via pollution
Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.
Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.
Switch RPi to using arm_devmap_add_entry() to set up static device mapping.
Allow 'no static device mappings' to potentially work.
Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.
Switch a10 to using arm_devmap_add_entry() to set up static device mapping.
Add polarity and level support to ARM GIC
Do not attach to PCI bridges in AHCI driver
Use only mapped BIOs on ARM
Fix race condition in DELAY for SP804 timer.
Call initarm_lastaddr() later in the init sequence, after establishing
static device mappings, rather than as the first of the initializations
that a platform can hook into. This allows a platform to allocate KVA
from the top of the address space downwards for things like static device
mapping, and return the final "last usable address" result after that and
other early init work is done.
Because some platforms were doing work in initarm_lastaddr() that needs to
be done early, add a new initarm_early_init() routine and move the early
init code to that routine on those platforms.
Make PTE_DEVICE a synonym for PTE_NOCACHE on armv4, to make it easier to
share the same code on both architectures.
Add new helper routines for arm static device mapping. The new code
allocates kva space from the top down for the device mappings and builds
entries in an internal table which is automatically used later by
arm_devmap_bootstrap(). The platform code just calls the new
arm_devmap_add_entry() function as many times as it needs to (up to 32
entries allowed; most platforms use 2 or 3 at most).
Remove imx local devmap code and use the essentially identical common
code that got moved from imx_machdep.c to arm/devmap.c.
Begin reducing code duplication in arm pmap.c and pmap-v6.c by factoring
out common code related to mapping device memory into a new devmap.c file.
Remove the growing duplication of code that used pmap_devmap_find_pa() and
then did some math with the returned results to generate a virtual address,
and likewise in reverse to get a physical address. Now there are a pair
of functions, arm_devmap_vtop() and arm_devmap_ptov(), to do that. The
bus_space_map() implementations are rewritten in terms of these.
Move remaining code and data related to static device mapping into the
new devmap.[ch] files. Emphasize the MD nature of these things by using
the prefix arm_devmap_ on the function and type names (already a few of
these things found their way into MI code, hopefully it will be harder to
do by accident in the future).
The change that triggered the need for this on head was r257244. That
hasn't been MFC'd yet, but there's no harm in paving the way for it with
this MFC.
Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.
Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.
Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.
- Initialize SMAPx registers too although they're unused in QEMU
- Do not pass IO/MEM resources to upper bus for activation, handle them locally.
Previously ACTIVATE method of upper bus was no-op so nothing bad
happened. But now FDT maps physaddr to vaddr and it causes
troubles: fdtbus_activate_resource resource assumes that
bustag/bushandle are already set which in this case is wrong.
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
