Now that armv4/v5 is gone, remove the bits that implemented atomic operations
by disabling interrupts.
Those were specific to FreeBSD and never reached upstream.
This is required to switch MIPS to compile with LLVM by default (D23204).
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24091
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Remove an old workaround that is no longer necessary since rS343824.
There used to be a problem with FMan interrupts firing on multiple CPUS
at the same time.
This ended up being due to multicast interrupts being unsupported in the
Freescale PIC (so instead of using a selection algorithm, it would do some
unspecified action, such as interrupting multiple cpus at random.)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23829
After the network epoch was added, we lost the ability to migrate the
ithread in the middle of dispatch, as being in the network epoch will pin
the current thread (for safety reasons.)
Luckily, we don't actually have to do this workaround in the first place,
as we can just bind it to the correct cpu when we preallocate it.
Pass dev through to XX_PreallocAndBindIntr() and actually bind it to the
cpu like it was supposed to in the first place, instad of leaving it
floating and moving it to the correct cpu the first time it fires.
This fixes panics while bringing up dtsec on my X5000.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23826
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23628
* Fix a couple of format errors.
* Add some extra compiler flags needed to force clang to build SPE code.
(These are temporary until the target triple is fixed)
ipf_pcksum6(), directly pass the adddress of the mbuf to it. This reduces
one pointer dereference. ipf_pcksum6() doesn't use the packet information
control block except to obtain the mbuf address.
MFC after: 3 days
FreeBSD-only function should live in the O/S specific source file.
This essentially reverts r349929 Now that ipftest and ipfreplay are
disabled in FreeBSD 11-stable.
MFC after: 3 days
The full release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.4
Notable changes in this release include improved decompression speed (about
10%). See the Github release notes for more details.
MFC after: I'm not going to, but feel free
Relnotes: yes
Version 43 requires further modifications to iwm(4), and this was not
caught in some initial testing. Version 34 works and is the version
available on Intel's web site.
MFC with: r354201
Sponsored by: The FreeBSD Foundation
Mock implementation of NETMAP routines is located in ena_netmap.c/.h
files. All code is protected under the DEV_NETMAP macro. Makefile was
updated with files and flag.
As ENA driver provide own implementations of (un)likely it must be
undefined before including NETMAP headers.
ena_netmap_attach function is called on the end of NIC attach. It fills
structure with NIC configuration and callbacks. Then provides it to
netmap_attach. Similarly netmap_detach is called during ena_detach.
Three callbacks are used.
nm_register is implemented by ena_netmap_reg. It is called when user
space application open or close NIC in NETMAP mode. Current action is
recognized based on onoff parameter: true means on and false off. As
NICs rings need to be reconfigured ena_down and ena_up are reused.
When user space application wants to receive new packets from NIC
nm_rxsync is called, and when there are new packets ready for Tx
nm_txsync is called.
Differential Revision: https://reviews.freebsd.org/D21934
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This is in preparation for adding the corresponding support to iwm(4).
Version 46 is the latest but contains unrecognized TLVs, so use version
43 for now.
Obtained from: linux-firmware
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
The logic in XX_IsPortalIntr() was reading past the end of XX_PInfo.
This was causing it to erroneously return 1 instead of 0 in some
circumstances, causing a panic on the AmigaOne X5000 due to mixing
exclusive and nonexclusive interrupts on the same interrupt line.
Since this code is only called a couple of times during startup, use
a simple double loop instead of the complex read-ahead single loop.
This also fixes a bug where it would never check cpu=0 on type=1.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D21988
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
On 64-bit platforms uintptr_t makes the copy twice as large as it should be.
This code isn't actually used in FreeBSD, since it's for guest mode only,
not hypervisor mode, but fixing it for completeness sake.
Reported by: bdragon (clang9 build)
Clang sees this construct and warns that adding an int to a string like this
does not concatenate the two. Fortunately, this is not what octeon-sdk
actually intended to do, so we take the path towards remediation that clang
offers: use array indexing instead.
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
Disable ar9300_swap_tx_desc() for the moment. It is an unused
function only tried to compile on big endian systems.
Found by: s390x buildkernel
MFC after: 3 months
Fix the reported boot failures and revert r350510.
Note this commit is effectively merging ACPICA 20190703 again and applying
an upstream patch.
https://github.com/acpica/acpica/commit/73f6372
Tested by: scottl
instead of the hard-coded value of 4. This is a precursor to increasing
the number of interfaces speficied in "on {interface, ..., interface}".
Note that though this feature is coded in ipf_y.y, it is partially
supported in the ipfilter kld, meaning it does not work yet (and is yet
to be documented in ipf.5 too).
MFC after: 2 weeks
