sys/netinet/ip_carp.c:
Add a "reason" string parameter to carp_set_state() and
carp_master_down_locked() allowing more specific logging
information to be passed into these apis.
Refactor existing state transition logging into a single
log call in carp_set_state().
Update all calls to carp_set_state() and
carp_master_down_locked() to pass an appropriate reason
string. For state transitions that were previously logged,
the output should be unchanged.
Submitted by: gibbs (original), asomers (updated)
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1039697 on 2014/02/11 (original)
1049992 on 2014/03/21 (updated)
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
very questionable, since it makes vimages more dependent on each other. But
the reason for the backout is that it screwed up shutting down the pf purge
threads, and now kernel immedially panics on pf module unload. Although module
unloading isn't an advertised feature of pf, it is very important for
development process.
I'd like to not backout r276746, since in general it is good. But since it
has introduced numerous build breakages, that later were addressed in
r276841, r276756, r276747, I need to back it out as well. Better replay it
in clean fashion from scratch.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
If the user sends an XPT_RESET_DEV CCB, make sure to reset the
Fibre Channel Command Reference Number if we're running on a FC
controller.
We send a SCSI Target Reset when we get this CCB, and as a result
need to reset the CRN to 1 on the next command.
isp_freebsd.c:
In the XPT_RESET_DEV implementation in isp_action(), reset
the CRN if we're on a FC controller.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112787 on 2015/01/15
Fix SCSI status byte reporting on 4Gb and 8Gb Qlogic boards.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
the data the inline functions access together at the start of the bus_space
struct. The start-of part isn't so important, it's the grouping-together
that's the point: now all the most-accessed data should be in one cache line.
Suggested by: cognet
systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
asynchronous remote dma request (DMA request that the
hardware cannot automatically handle).
sys/dev/firewire/firewire.c
In fw_rcv(), add missing early return in the error
path for DMA requests to unregistered regions.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110993 on 2015/01/06
sys/boot/i386/libfirewire/firewire.c:
sys/dev/firewire/firewire.c:
Fix configuration ROM generation count wrapping logic
so that the generation count is never outside of
allowed limits (0x2 -> 0xF).
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), xfer->fc may be NULL. Protect
against this before taking the fc lock.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110685 on 2015/01/05
sys/dev/firewire/firewire.c:
In fw_xfer_unload() expand lock coverage so that
the test for FWXF_INQ doesn't race with it being
cleared in another thread.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110207 on 2015/01/02
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), clear the FWXF_INQ flag on the
xfer under protection of the FW_GMTX, after the
xfer is removeed from the tx/rx queue. Otherwise
it is possible for the xfer to be removed again
(corrupting the list or immediately panicing) from
another thread that has found this xfer in the
transaction label table.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110200 on 2015/01/02
ZFS already commits outstanding data every zfs_txg_timeout seconds, so these
syncs are unnecessarily intrusive.
Submitted by: gibbs
Sponsored by: Spectra Logic
MFSpectraBSD: 1105759 on 2014/12/11
Since allow_mounted is a FreeBSD-specific change, default to B_TRUE, then
locally check for the magic bit. Unconditionally check allow_mounted below.
Convert the setting of allow_mounted to an explicit boolean.
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 672578 (in part) on 2013/07/19
mostly a no-op since all currently-supported instances of these CPUs give
the number of SLB slots in the device tree, but keep it here as well just
in case.
instructions to call through pointers instead. In general, these are set
implicitly through relocation processing. One has to be set explicitly in
machdep.c, however, to fit one handler in the tiny (8 instruction) space
available.
Reviewed by: andreast
Differential revision: D1554
Tested on: UP and SMP G5, Cell, POWER5+
We obtain a stable copy and store it in local 'fde' variable. Storing another
copy (based on aforementioned variable) does not serve any purpose.
No functional changes.
The only potential in-tree consumer (_fdrop) special-cased it and returns 0
0 on its own instead of calling badfo_close.
Remove the special case since it is not needed and very unlikely to encounter
anyway.
No objections from: kib
This is primarily for developer/debugging use; it enables built-in tagged
tracking of refcounts inside ZFS. It can only be enabled from the loader,
since it modifies how in-core state is managed. Default remains disabled.
MFC after: 1 week
Sponsored by: Spectra Logic
as the cpu id on arm64 as it may use two cells. In it's place we can use
the device id.
It is expected we will use the reg data on arm64 to enable cores so we
still need to read and store it even if it is not yet used.
Differential Revision: https://reviews.freebsd.org/D1555
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
commit 4d93914ae3db4a897ead4b. Some related drm infrastructure
changes are imported as needed.
Biggest update is the rewrite of the i915 gem io to more closely
follow Linux model, althought the mechanism used by FreeBSD port is
different.
Sponsored by: The FreeBSD Foundation
MFC after: 2 month
sequences, like are used to read the HIDs. This is both easier to read
and avoids a miscompilation by GCC in certain circumstances. Also avoid
double restoration of HID4 and HID5.
MFC after: 2 weeks
