bcm4306 cards are ambiguous. BCM4306 rev 2 requires bwi. BCM4306 rev
3 will work with either. Since we can't easily determine which is
which, just remove them.
a solution is using PIO mode. As fas as I know all open source based
broadcom drivers for specially LP PHY has this issue because it's
a reverse engineered driver from wl(4).
Pointed by: Warren Block <wblock at wonkity.com>
- Fixed the interface probe routine to only attach to USB interfaces the driver
actually supports. This allows other drivers to attach to things like
MicroSD slots etc.
- Fixed network interface enumeration to be globally sequential instead of
relying on the USB interface numbers. This make sure the first network
interface always is at uhso0 and the second at usho1 and so on.
- Added a radio kill switch; exposed through sysctl.
- Updated the manual page to be verbose about the number of serial ports and
include iCON 452 in the set of tested hardware.
Submitted by: Fredrik Lindberg
FreeBSD. SIFTR logs a range of statistics on active TCP connections to a log
file, providing the ability to make highly granular measurements of TCP
connection state. The tool is aimed at system administrators, developers and
researchers alike. Please take it for a spin and test it out - the man page
should have all the information required to get you going.
Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.
Sponsored by: Cisco URP, FreeBSD Foundation
Reviewed by: dwmalone, gnn, rpaulo
Tested by: Many on freebsd-current@ and elsewhere over the years
MFC after: 1 month
It has more features than acpi_aiboost(4) and it will eventually replace
acpi_aiboost(4).
Submitted by: Constantine A. Murenin <cnst at FreeBSD.org>
Reviewed by: freebsd-acpi, imp
MFC after: 1 month
- Allow setting format, resolution and accuracy of BPF time stamps per
listener. Previously, we were only able to use microtime(9). Now we can
set various resolutions and accuracies with ioctl(2) BIOCSTSTAMP command.
Similarly, we can get the current resolution and accuracy with BIOCGTSTAMP
command. Document all supported options in bpf(4) and their uses.
- Introduce new time stamp 'struct bpf_ts' and header 'struct bpf_xhdr'.
The new time stamp has both 64-bit second and fractional parts. bpf_xhdr
has this time stamp instead of 'struct timeval' for bh_tstamp. The new
structures let us use bh_tstamp of same size on both 32-bit and 64-bit
platforms without adding additional shims for 32-bit binaries. On 64-bit
platforms, size of BPF header does not change compared to bpf_hdr as its
members are already all 64-bit long. On 32-bit platforms, the size may
increase by 8 bytes. For backward compatibility, struct bpf_hdr with
struct timeval is still the default header unless new time stamp format is
explicitly requested. However, the behaviour may change in the future and
all relevant code is wrapped around "#ifdef BURN_BRIDGES" for now.
- Add experimental support for tagging mbufs with time stamps from a lower
layer, e.g., device driver. Currently, mbuf_tags(9) is used to tag mbufs.
The time stamps must be uptime in 'struct bintime' format as binuptime(9)
and getbinuptime(9) do.
Reviewed by: net@
- .Nd in section NAME is not optional
- .Ed was missing
- "indent" is not a flag, but a literal argument for -offset
- stop switching font sizes for acronyms
- use .Brq instead of rolling our own
passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.
Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com>
Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with: net@
Approved by: mav (mentor)
MFC after: 1 month
[1] Following style for manpages, just do carriage return after a
sentence.
Sponsored by: Sandvine Incorporated
[0] Submitted by: emaste
[1] Submitted by: rwatson
The driver is stub. It just creates device entry and feeds
reassembled packets from hardware into it.
If in future we would port wsmouse(4) from NetBSD, or make
sysmouse(4) to support absolute motion events, then the driver
can be extended to act as system mouse. Meanwhile, it just
presents a /dev/uep0, that can be utilized by X driver, that
I am going to commit to ports tree soon.
The name for the driver is chosen to be the same as in NetBSD,
however, due to different USB stacks this driver isn't a port.
Implement an optional delay to the ddb reset/reboot command.
This allows textdumps to be run automatically with unattended reboots
after a resonable timeout, while still permitting an administrator to
break into debugger if attached to the console at the time of the
event for further debugging. Cap the maximum delay at 1 week to avoid
highly accidental results, and default to 15s in case of problems
parsing the timeout value.
Move hex2dec helper function from db_thread.c to db_command.c to make
it generally available and prefix it with a "db_" to avoid namespace
collisions.
Reviewed by: rwatson
MFC after: 4 weeks
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
driver for CAM ATA subsystem. This driver supports same hardware as
atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides
many additional features, such as NCQ, PMP, etc.
interface considers that it hits a fatal error, and will not copyout
the request structure back for _IOW and _IOWR ioctls, keeping them
untouched.
The previous implementation of the SIOCGIFDESCR ioctl intends to
feed the buffer length back to userland. However, if we return
an error, the feedback would be defeated and ifconfig(8) would
trap into an infinite loop.
This commit changes SIOCGIFDESCR to set buffer field to NULL to
indicate the previous ENAMETOOLONG case.
Reported by: bschmidt
MFC after: 2 weeks
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
also move to a 2-clause license. From n_hibma@:
"The 3rd clause was originally there for a reason, but I guess that it is
safe to assume that no one can assume endorsement by me or anyone else
without prior consent on anything really, so we might as well remove that
clause."
Approved by: n_hibma
o uses v4 firmware instead of v3. A port will be committed to create
the bwn firmware module.
o supports B/G and LP(low power) PHYs.
o supports 32 / 64 bits DMA operations.
o tested on big / little endian machines so should work on all
architectures.
It'd not connected to the build until the firmware port is committed.
brightness, wired LAN power and bass gain), and update the description of
one previously unknown feature (display contrast). While here, expand on
a comment and remove two defines left over from an old version of the code.
Also update man page to document the above changes, and correct grammar.
PR: kern/127581
using the wlan(4) debugging controls with wording slightly
different from that in the PR.
PR: 142367
Submitted by: Matthew Thyer <matt.thyer@gmail.com>
MFC after: 2 weeks
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.
Obtained from: Fredrik Lindberg <fli@shapeshifter.se>
it mentioned only VT6122. While I'm here remove the mention of
VT3119 which seems to be VIA's internal model name and VT3119
wouldn't be available to end users.
Reviewed by: brueffer
This tunable allows one to enable (1) or disable (0) gestures like tap
and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled
(ie. "hw.psm.synaptics_support" not set).
By default, the value is -1 in order to keep the current behaviour of
not enabling/disabling gestures explicitly.
PR: kern/139272
Submitted by: David Horn <dhorn2000 AT gmail DOT com>
Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
attach chips with generic Marvell (non-HighPoint) PCI identification.
These chips are also supported by ata(4). Some vendors, like Supermicro,
are using same chips without providing HPT RAID BIOS.
PR: kern/120842, kern/136750
In r198272 I didn't notice that watchdog(8) and watchdogd(8)
are different things and instead of fixing watchdogd markup
I simply nuked the line.
Noticed by: emaste
Pointy hat to: avg
and a google search yields no alternative). Remove the links but
keep the entries around for reference.
PR: 139756
Submitted by: Patrick Oonk <patrick@pine.nl>
MFC after: 3 days
