available, the error return should be EADDRNOTAVAIL rather than
EAGAIN.
PR: 14181
Submitted by: Dima Dorfman <dima@unixfreak.org>
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
* This file must be kept synchronized with <sys/timespec.h>.
* It defines a structure which must be a type pun for
* `struct timespec'; this structure is used in header files where
* the ABI uses a `struct timespec' but standards prohibit its
* definition. (Currently only <sys/stat.h>.)
calls returning EACCES instead of EPERM. This patch modifies vaccess()
to return EPERM instead of EACCES if VADMIN is among the requested
rights. This affects functions normally limited to the owners of
a file, such as chmod(), as EPERM is the error indicating that
privilege would allow the operation, rather than a chance in mandatory
or discretionary rights.
Reported by: bde
splimp() -- we need it because dummynet can be invoked by the
bridging code at splimp().
This should cure the pipe "stalls" that several people have been
reporting on -stable while using bridging+dummynet (the problem
would not affect routers using dummynet).
+ configuration: make sure that the NUL at the end of the config
string is properly detected and handled, and the stats passed
up via sysctl properly reflect which interfaces do bridging.
(The whole config support might make good use of some cleanup
in the future).
+ fixed some bugs related to the corruption of multicast and
broadcast packets: make sure that for those packets the entire
IP + ethernet header is in the mbuf, not in a cluster, so
that writes performed in that area by the upper layers do
not affect us.
+ performance: when calling m_pullup, make room for the ethernet header
as well, we are going to add it in right after. Also, change an m_dup
back to m_copypacket. The former is not necessary anymore now, and
it did not help, anyways.
I will do a fast MFC because 95% of this patch is fixing bad bugs
and i doubt anyone would test the fix in CURRENT. Plus the last
two items mostly bring back some code which was already there in 4.0
times.
Initialize rid to 0. This doesn't seem to make any difference
(the driver doesn't care what rid it gets and no-one seems to
check rid's value), but follows standard conventions.
Pass in our device_t to ahc_alloc(). We now use device_T
softc storage, so passing NULL results in a panic.
Set the unit number in our softc so that the driver core
can retrieve it.
ahc_pci.c:
Set the unit number in our softc so that the driver core
can retrieve it.
aic7770.c:
Insert our softc into the list of softcs when initialization
is successful.
aic7xxx.c:
Remove a workaround for an aic7895 bug we will never trigger.
Add additional diagnostic info to ahc_dump_card_state().
Always panic the system if a sequencer assertion fails.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Replace a hard coded number with a constant.
Guard against looping forever in ahc_pause_and_flushwork().
A hot eject or card failure may make the intstat register
return 0xFF, so limit the number of interrupts we'll process.
Correct the code in ahc_search_qinfifo() that guarantees that
the sequencer will see an abort collision if the qinfifo is
modified when a DMA is in progress. We now do this fixup
after modifying the queue. This guarantees that the HSCB
we place at the head of the queue is not the same as the
old head. Using "next hscb" (guaranteed not to be the
same as the first SCB) before clearing the queue could free
up the original head hscb to be used during a remove operation
placing it again at the head of the qinfifo.
aic7xxx.h:
Reduce the maximum number of outstanding commands to 253 from
254. To handle our output queue correctly on machines that only
support 32bit stores, we must clear the array 4 bytes at a
time. To avoid colliding with a DMA write from the sequencer,
we must be sure that 4 slots are empty when we write to clear
the queue. This reduces us to 253 SCBs: 1 that just completed
and the known three additional empty slots in the queue that
preceed it. Yahoo was able to force this race on one of their
systems. Interrupts were disabled for such a time that the
entire output queue was filled (254 entries complete without
any processing), and our 32bit write to clear the status clobbered
one entry.
Add a feature tag for devices that are removable.
aic7xxx.reg:
Never use the sequencer interrupt value of 0xF0. We need
to guanrantee that an INTSTAT value of 0xFF can only occur
during card failure or a hot-eject.
Align the busy targets table with the begining of scratch
space. This seems to appease a chip bug in the aic7895.
aic7xxx.seq:
Be sure to disable select-out after a bus free event that occurs
early in a selection. If we don't disable select-out, we will
believe that it is enabled even though a new selection will never
occur.
Move the clearing of SELDI to just before a jump. This appeases
another chip bug of the aic7895.
Make the target mode command loop a bit more efficient.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Properly cleanup the last SCB we tested against should we
fail to properly find an SCB for a reselection.
Add some additional sequencer debugging code.
aic7xxx_freebsd.c:
Limit the driver to 253 outstanding commands per adapter.
Guard against overflow in timeout handling.
aic7xxx_inline.h:
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
aic7xxx_pci.c:
Set the removable feature for the apa1480 cardbus and the 29160C
Compact PCI card.
Don't report high byte termination information for narrow cards.
Use a PCI read rather than a questionable delay when fetching/setting
termination settings.
- replace the simplelock in struct vm_zone with a mutex.
- use a proper SLIST rather than a hand-rolled job for the zone list.
- add a subsystem lock that protects the zone list and the statistics
counters.
- merge _zalloc() into zalloc() and _zfree() into zfree(), and
move them below _zget() so there's no need for a prototype.
- add two initialization functions: one which initializes the
subsystem mutex and the zone list, and one that currently doesn't
do anything.
- zap zerror(); use KASSERTs instead.
- dike out half of sysctl_vm_zone(), which was mostly trying to do
manually what the snprintf() call could do better.
Reviewed by: jhb, jasone
inline functions non-inlined. Hide parts of the mutex implementation that
should not be exposed.
Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).
Submitted by: peter
MFC'ed i due time. I can't test it under current right now because
netgraph seems to do unethical things with mutexes.
musycc:
Add status per channel.
Reduce printf chattyness
Keep error counters line if_mn does.
Increase descriptor count.
if_mn:
Support experimental unframed E1 lines.
These two drivers should share more code relating to framed channelized
TDM media in general (T1/E1/E3/T3, Sonet). Anyone interested email me.
interrupt threads to run with it always >= 1, so that malloc can
detect M_WAITOK from "interrupt" context. This is also necessary
in order to context switch from sched_ithd() directly.
Reviewed By: peter
initialization until after malloc() is safe to call, then iterate through
all mutexes and complete their initialization.
This change is necessary in order to avoid some circular bootstrapping
dependencies.
for SMP; just use the same ones as UP. These weren't used without
holding Giant anyway, and the routines that use them would have to
be protected from pre-emption to avoid migrating cpus.
parts: isa and pccard. The isa one is known to work with an IBM
EtherJet ISA card. The pccard one isn't known to work because the
EtherJet pccard I purchased recently arrived DOA :-(. I'll commit the
pccard.conf entry when the replacement card arrives.
I plan on MFC this in a week or two.
pre-emptable kernel. For variables of size 4 bytes or less they compile
to a single instruction, which does not allow a process to migrate cpus
in the middle, and get the value for the "wrong" cpu.
calls it rather than obtaining and releasing it a lot in proc_compare.
- Collect all of the data gathering and stick it just after the
proc_compare loop. This way, we only have to grab sched_lock once now
when handling SIGINFO. All the printf's are done after the values are
calculated.
Submitted mostly by: bde
