reporting IP-addresses to the peer during the handshake, adding
addresses to the host, reporting the addresses via the sysctl
interface (used by netstat, for example) and reporting the
addresses to the application via socket options.
This issue was reported by Bernd Walter.
MFC after: 3 days
separate argument structure with added level_type field for
CPUID_CPUID_COUNT request.
Reviewed by: attilio (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
map entries list, and that it does not overlap with the previous and
next entries.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Assume the number of description used is reasonable value to
increment this otherwise opaque field by.
While here, reduce a minor difference between the legacy and
multiqueue transmit paths.
MFC after: 1 week
This requires the VMware vmxnet3 device to flip the start of packet
descriptor's generation before the rest of the packet's descriptors
have been loaded into the Rx ring. I've never observed this behavior,
and it seems to make the most sense not to do it this way. But it is
not a lot of work for the driver to handle this situation just in case.
MFC after: 1 week
The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was written with
the corresponding safety check in place to tolerate that. Unfortunately
the recent locking cleanup did add a locking assertion that tries to
dereference the target->sbp pointer unconditionally, which causes less
than desirable outcome. Since the assertion is useful, just initialize
the target sbp pointer once when sbp device is being initialized instead
of when the target is being attached. This makes assertion work in all
cases and fixes the crash on boot.
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
instead of trying to cache it.
Previously, we only trusted the state if we did not have a cached state.
However, once a state was cached, the _STA method was always ignored.
Specifically, once a power resource had been turned on once (e.g.
during resume), the driver assumed it was always on even if _STA said it
was off and never turned it back on. This prevented the power resource
from being turned back on if a laptop was resumed twice, for example.
To fix, just remove the cached state entirely and always use the results
of _STA. The loops already skip any resources where _STA fails.
Submitted by: trasz (initial patch to invoke _ON)
MFC after: 1 week
corresponding flag(s) in the new map entry. Previously, the caller was
responsible for setting them after vm_map_insert() returned.
Pass MAP_STACK_GROWS_DOWN to vm_map_insert() from vm_map_growstack() when
extending the stack in the downward direction.
Together these changes slightly simplify the caller's task when creating a
downward growing stack. In particular, the caller no longer needs to clip
the previous entry, because the new stack entry can't possibly coalesce
with the previous entry.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
From one side it allows to remove CTL_FLAG_TASK_PENDING flag, handling of
which significantly complicates fine-grained locking. From the other side
it reduces task management requests latency even below then that flag could.
As downside, it denies task management code to sleep, but that is not needed
any way now.
Discussed with: ken
This should allow to abort commands doing mostly disk I/O, such as VERIFY
or WRITE SAME. Before this change CTL_FLAG_ABORT was only checked around
data moves, which for these commands may not happen for a very long time.
MFC after: 2 weeks
SPC-4 recommends T10 vendor ID based LUN ID was created by concatenating
product name and serial number (and istgt follows that). But product name
is 16 bytes long by itself, so 16 bytes total length is clearly not enough
to fit both.
To keep compatibility with existing configurations, pad short device IDs
to old length of 16, same as before.
This change probably breaks CTL user-level ABI, so control tools should
be rebuilt after this change.
MFC after: 2 weeks
we're now back to the pre-r228483 level of default verbosity. This in
turn again typically allows for reading information that userland might
have printed on the screen before initiating a halt, but still permits
to debug potential device shutdown problems on system shutdown via
CAM_DEBUG etc.
Reviewed by: mav
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
and prevents the request from deleting existing mappings in the
region, failing instead.
Reviewed by: alc
Discussed with: jhb
Tested by: markj, pho (previous version, as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for any outstanding commands to be properly aborted by CTL.
Without it, in some cases (such as files backing the LUNs
stored on failing disk drives), terminating a busy session
would result in panic.
Reviewed by: mav@ (earlier version)
Sponsored by: The FreeBSD Foundation
Fix the gate in xen_pv_lapic_ipi_vectored to prevent access to element
at position nitems(xen_ipis).
Sponsored by: Citrix Systems R&D
Coverity ID: 1223203
Approved by: gibbs
- Don't compare the DMA map to NULL to determine if bus_dmamap_unload()
should be called when releasing a static allocation. Instead, compare
the bus address against 0.
- Don't assume that the DMA map for static allocations is NULL. Instead,
save the value set by bus_dmamem_alloc() so it can later be passed to
bus_dmamem_free(). Also, add missing calls to bus_dmamap_unload() in
these cases before freeing the buffer.
- Use the bus address from the bus_dma callback instead of calling
vtophys() on the address allocated by bus_dmamem_alloc().
Reviewed by: kan
- Add missing calls to bus_dmamap_unload() in et(4).
- Check the bus address against 0 to decide when to call
bus_dmamap_unload() instead of comparing the bus_dma map against NULL.
- Check the virtual address against NULL to decide when to call
bus_dmamem_free() instead of comparing the bus_dma map against NULL.
- Don't clear bus_dma map pointers to NULL for static allocations.
Instead, treat the value as completely opaque.
- Pass the correct virtual address to bus_dmamem_free() in wpi(4) instead
of trying to free a pointer to the virtual address.
Reviewed by: yongari
The functions' definitions are protected by #ifdef SMP.
Keeping apic_ops.ipi_*() methods NULL would allow to catch the use
on UP machines.
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
permissions test, forgotten in r164033.
Refactor the permission checks for utimes(2) into vnode helper
function vn_utimes_perm(9), and simplify its code comparing with the
UFS origin, by writing the call to VOP_ACCESSX only once. Use the
helper for UFS(5), tmpfs(5), devfs(5) and msdosfs(5).
Reported by: bde
Reviewed by: bde, trasz
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
Make data_submit backends method support not only read and write requests,
but also two new ones: verify and compare. Verify just checks readability
of the data in specified location without transferring them outside.
Compare reads the specified data and compares them to received data,
returning error if they are different.
VERIFY(10/12/16) commands request either verify or compare from backend,
depending on BYTCHK CDB field. COMPARE AND WRITE command executed in two
stages: first it requests compare, and then, if succeesed, requests write.
Atomicity of operation is guarantied by CTL request ordering code.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This is needed because syscons depends on ISA.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
x86/isa/isa.c:
- Allow the ISA bus to attach to xenpv.
