Commit Graph

1313 Commits

Author SHA1 Message Date
cy
17ceea3a91 Fix case where fastroute or "to interface" is used with incorrect FIB.
PR:		183065
Submitted by:	p-freebsd-bugs@ziemba.us
Approved by:	glebius
MFC after:	1 week
2014-06-19 05:45:17 +00:00
delphij
4c6f2b6755 Fix decoding of near CALL when address-size prefix (67h) is present.
Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:38:14 +00:00
delphij
f0333bcbd4 Fix decoding of LEA when address-size prefix (67h) is present.
This is loosly based on Xorg changeset f57bc0e by Christian
Zander.

Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:31:41 +00:00
delphij
c131765bd2 Fix decoding of MOVSX.
Submitted by:	Wolf Ramovsky <wolf.ramovsky gmail.com>
		via core (peter)
MFC after:	2 weeks
2014-06-11 20:22:14 +00:00
cy
27e67c6849 Move mutex creation from ipf_log_soft_init() to ipf_log_soft_create()
to be consistent with mutex destruction in ipf_log_soft_destroy(). As a
result mutex destruction in ipf_log_soft_fini() is redundant.

Approved by:	glebius (mentor)
Obtained from:	darrenr (author)
2014-05-24 06:05:21 +00:00
adrian
592472ed14 Add Atheros AR1111 support to the HAL.
This seems to probe/attach as an AR9485 and thus nothing else besides
adding the device id seems to be required.

ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 1926.8
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000

The NIC I have here is a 1 antenna, 2GHz only device.

Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC.

Tested:

* AR1111 (pretending not to be an AR9485, but failing miserably);
  STA mode with powersave.

Relnotes:	yes
Sponsored by:	Netgate
2014-05-05 07:58:05 +00:00
adrian
1614235722 Add ar9300_get_next_tbtt().
Tested:

* AR9380, STA mode
2014-04-30 02:29:31 +00:00
adrian
baf3c68395 Only track the power state variable if the power state is changed,
not if the self-generated frame state is changed.
2014-04-30 02:03:47 +00:00
adrian
868ef72add Note that the AR9380 and later hardware supports MYBEACON.
(Yes, I said AR5416 in the committed code.  It's still strictly true.)
2014-04-27 23:37:39 +00:00
kevlo
867becd902 Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
Committed over the TP-LINK TL-WN725N v2 (RTL8188EUS) on amd64 with WPA.
2014-04-25 08:01:22 +00:00
cy
9705e55d4b Implement the final missing sysctls by moving ipf_auth_softc_t from
ip_auth.c to ip_auth.h. ip_frag_soft_t moves from ip_frag.c to
ip_frag.h. mlfk_ipl.c creates sysctl MIBs that reference control blocks
that are dynamically created when IP Filter is loaded. This necessitated
creating them on-the-fly rather than statically at compile time.

Approved by:	glebius (mentor)
2014-04-07 19:32:56 +00:00
adrian
1c4cb59b68 Fix ah_powerMode setting.
Reported by:	sbruno
2014-03-29 18:56:11 +00:00
adrian
95d39afff0 Also tag the current HAL power mode in ar9300_set_power_mode(). 2014-03-10 06:05:26 +00:00
delphij
d68939d236 MFV r262756:
Import xz-embedded from git.

This is from commit hash '6a8a2364434763a033781f6b2a605ace9a021013'.

This makes it possible to use CRC64 but for now it's intentionally
not added to build.
2014-03-05 01:33:15 +00:00
glebius
8a3e4bbebb - Remove rt_metrics_lite and simply put its members into rtentry.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
  removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
  mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.

The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.

Discussed with:		melifaro
Sponsored by:		Netflix
Sponsored by:		Nginx, Inc.
2014-03-05 01:17:47 +00:00
imp
1b123b598a These file have a, possibly dubious, GPL claim. Until that's sorted, move to gnu. 2014-02-28 16:26:44 +00:00
imp
52a247ab30 Correct initial import script 2014-02-28 01:33:03 +00:00
imp
d6ec517004 Initial import of DTS files from Linux 2014-02-28 01:32:44 +00:00
imp
c6fbf5a85a Initial import of Linux/Vendor DTS files for various embedded boards. 2014-02-28 01:31:35 +00:00
brueffer
4c9c4234e2 Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA
nForce MCP adapters for a long time.

Yays:	jhb, remko, yongari
Nays:	none on the current and stable lists
2014-02-16 12:22:43 +00:00
glebius
750ebc2942 Substitute flags from historical mbuf(9) allocator with modern ones.
Sponsored by:	Nginx, Inc.
2014-01-16 13:42:14 +00:00
gavin
f586c22ed6 Add firmware for Intel Centrino Wireless-N 105 devices.
Committed from:	Centrino 105 device
2014-01-11 18:56:48 +00:00
gavin
c0bedb8ffd Add firmware version 18.168.6.1 (API version 6) for Intel Centrino
Wireless-N 135 wireless adapters, soon to be supported by iwn(4).

Committed using:	Laptop with Centrino 135 chipset
Obtained from:	wireless.kernel.org firmware downloads
2014-01-05 01:07:14 +00:00
ian
1b34d4589a Remove 'inline' from ar9300_init_pll(), it's too big to inline.
Submitted by:	adrian@
2013-11-08 16:28:00 +00:00
glebius
8b6005b9da Fix build. We need to include systm.h before if_var.h.
Pointy hat to:	glebius
2013-10-28 15:11:37 +00:00
glebius
de76f7ae50 Include lock.h before mutex.h. 2013-10-27 17:12:31 +00:00
glebius
e352aa585e Move new pf includes to the pf directory. The pfvar.h remain
in net, to avoid compatibility breakage for no sake.

The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.

Discussed with:		bz
2013-10-27 16:25:57 +00:00
glebius
4fe4e9732a Start splitting pfvar.h into internal and external parts.
- Provide pf_altq.h that has only stuff needed for ALTQ.
- Start pf.h, that would have all constant values and
  eventually non-kernel structures.
- Build ALTQ w/o pfvar.h, include if_var.h, that before
  came via pollution.
- Build tcpdump w/o pfvar.h.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 18:59:58 +00:00
kevlo
5388af3974 Update firmware for run(4) to version 0.33. 2013-10-18 07:40:50 +00:00
np
17dd43ec29 Update krping to the latest upstream code. Move all the FreeBSD
specific parts to krping_dev.c, which leaves the other files as
close to their upstream versions as possible.
2013-10-14 23:02:05 +00:00
np
d4625b6fda Delete all of the old RDMA code (except krping, which was switched to
use sys/ofed some time back).  This has been sitting around as dead code
in the tree for a very long time.
2013-10-14 22:39:08 +00:00
dim
981609eeba Initialize a variable in sys/contrib/ipfilter/netinet/ip_tftp_pxy.c, to
silence a gcc warning.

Approved by:	re (rodrigc)
X-MFC-With:	r255332
2013-10-10 07:23:11 +00:00
dim
3c43c9607a Initialize a variable in sys/contrib/ipfilter/netinet/ip_rcmd_pxy.c, to
silence a gcc warning.

Approved by:	re (gjb)
X-MFC-With:	r255332
2013-10-09 17:07:50 +00:00
alfred
91eb2b78a7 Update OFED to Linux 3.7 and update Mellanox drivers.
Update the OFED Infiniband core to the version supplied in Linux
version 3.7.

The update to OFED is nearly all additional defines and functions
with the exception of the addition of additional parameters to
ib_register_device() and the reg_user_mr callback.

In addition the ibcore (Infiniband core) and ipoib (IP over Infiniband)
have both been made into completely loadable modules to facilitate
testing of the OFED stack in FreeBSD.

Finally the Mellanox Infiniband drivers are now updated to the
latest version shipping with Linux 3.7.

Submitted by: Mellanox FreeBSD driver team:
                Oded Shanoon (odeds mellanox.com),
                Meny Yossefi (menyy mellanox.com),
                Orit Moskovich (oritm mellanox.com)

Approved by: re
2013-09-29 00:35:03 +00:00
cy
907e185a7d Address double init of ip_log mutex, fixing a panic after ipfilter is
re-enabled following it being disabled.

Approved by:	glebius (mentor)
Approved by:	re (blanket)
2013-09-21 04:11:51 +00:00
cy
3d2d2370b0 Enable main ipfilter sysctl MIBs.
Approved by:	glebius (mentor)
Approved by:	re (blanket)
2013-09-21 04:08:52 +00:00
cy
15a9875829 Convert ipfilter from timeout(9) to callout(9).
Submitted by:	jhb
Approved by:	glebius (mentor)
Approved by:	re (blanket)
2013-09-21 04:05:38 +00:00
cy
f85536e875 Remove additional non-FreeBSD code.
Approved by:	glebius (mentor)
Approved by:	re (blanket)
2013-09-21 03:57:56 +00:00
glebius
8b153d11e7 Fix !INET6 build. 2013-09-07 09:47:18 +00:00
cy
c1298c7a07 Update ipfilter 4.1.28 --> 5.1.2.
Approved by:		glebius (mentor)
BSD Licensed by:	Darren Reed <darrenr@reed.wattle.id.au> (author)
2013-09-06 23:11:19 +00:00
gnn
9e645a26a0 Add firmware for Centrino 2200-N wireless devices.
Driver software for this firmware will be updated in a following commit.
2013-08-28 15:12:51 +00:00
dumbbell
0d898a1422 drm/radeon: Import the Radeon KMS driver
This driver is based on Linux 3.8 and a previous effort by kan@.

More informations about this project can be found on the FreeBSD wiki:
    https://wiki.freebsd.org/AMD_GPU

The driver is split into:

  sys/dev/drm2:
    The driver sources.

  sys/modules/drm2/radeonkmw:
    The driver main kernel module's Makefile.

  sys/modules/drm2/radeonkmsfw:
    All firmware kernel module Makefiles. There's one directory and one
    Makefile for each firmware.

  sys/contrib/dev/drm2/radeonkmsfw:
    All firmware binary sources.

  tools/tools/drm/radeon
    Tools to update firmwares or regenerate some headers.

Merging the driver to FreeBSD 9.x may be possible but not a priority for
now.

Help from:	kib@, kan@
Tested by:	avg@, kwm@, ray@,
		Alexander Yerenkow <yerenkow@gmail.com>,
		Anders Bolt-Evensen <andersbo87@me.com>,
		Denis Djubajlo <stdedjub@googlemail.com>,
		J.R. Oldroyd <fbsd@opal.com>,
		Mikaël Urankar <mikael.urankar@gmail.com>,
		Pierre-Emmanuel Pédron <pepcitron@gmail.com>,
		Sam Fourman Jr. <sfourman@gmail.com>,
		Wade <wade-is-great@live.com>,
		(probably other I forgot...)
HW donations:	kyzh, Yakaz
2013-08-25 19:37:15 +00:00
jkim
f2dafdee67 Merge ACPICA 20130823. 2013-08-23 23:25:58 +00:00
np
debdf2d1b8 Assorted fixes to krping. Disconnect the rest of sys/contrib/rdma from
the build while here.  sys/ofed has more recent RDMA code and should be
used instead.  We should probably move krping out of sys/contrib/rdma
and get rid of the rest of it.

Obtained from:	Chelsio
2013-08-23 19:12:29 +00:00
adrian
bbb093c012 Add firmware for the Intel 2030 and variants.
Submitted by:	Cedric GROSS <cg@gross.info>
Obtained from:	Linux, Intel
2013-08-11 01:09:16 +00:00
adrian
80a5356f3d Remove a now-unused firmware. 2013-08-11 01:04:07 +00:00
adrian
02826bf3e4 Update the 6000g2a image.
Obtained from:	Linux, Intel
2013-08-11 01:03:32 +00:00
rpaulo
9a3b3c75d4 Realtek's RTL8712 firmware blob needed by the upcoming rsu(4) driver. 2013-07-29 06:53:42 +00:00
jkim
e0885a9b34 Merge ACPICA 20130725. 2013-07-26 21:34:09 +00:00
cy
28206da87a As per the developers handbook (5.3.1 step 1), prepare the vendor trees for
import of new ipfilter vendor sources by flattening them.

To keep the tags consistent with dist, the tags are also flattened.

Approved by:	glebius (Mentor)
2013-07-19 05:41:57 +00:00