vtnet interfaces are always in promiscuous mode (at least if the
VIRTIO_NET_F_CTRL_RX feature is not negotiated with the host). if_promisc() on
a vtnet interface returned ENOTSUP although it has IFF_PROMISC set. This
confused the bridge code. Instead we now accept all enable/disable promiscuous
commands (and always keep IFF_PROMISC set).
There are also two issues with the if_bridge error handling.
If if_promisc() fails it uses bridge_delete_member() to clean up. This tries to
disable promiscuous mode on the interface. That runs into an assert, because
promiscuous mode was never set in the first place. (That's the panic reported in
PR 200210.)
We can only unset promiscuous mode if the interface actually is promiscuous.
This goes against the reference counting done by if_promisc(), but only the
first/last if_promic() calls can actually fail, so this is safe.
A second issue is a double free of bif. It's already freed by
bridge_delete_member().
PR: 200210
Differential Revision: https://reviews.freebsd.org/D2804
Reviewed by: philip (mentor)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
Currently if you ifconfig down a vtnet interface while it is being used
via netmap, the kernel panics due to trying to treat the cookie values
in the virtio rings as mbufs to be freed. When netmap is enabled, these
cookie values are pointers to something else.
Note that other netmap-aware drivers don't seem to need this as they
store the mbuf pointers in the software rings that mirror the hardware
descriptor rings, and since netmap doesn't touch those, the software
state always has NULL mbuf pointers causing the loops to free mbufs to
not do anything. However, vtnet reuses the same state area for both
netmap and non-netmap mode, so it needs to explicitly avoid looking at
the rings and treating the cookie values as mbufs if netmap is
enabled.
Differential Revision: https://reviews.freebsd.org/D2348
Reviewed by: adrian, bryanv, luigi
MFC after: 1 week
Sponsored by: Norse Corp, Inc.
Previously, the driver resets the device and abandon the requests that
are caught in flight when the dump was initiated. This was problematic
if the system is resumed after the dump is completed.
While that is probably not the typical action, it is simple to rework
the driver to very likely have the device usable after the dump without
making it more likely for the dump to fail. The in flight requests are
simply queued for completion once the dump is finished.
Requested by: markj
MFC after: 1 month
o Move similar block/networking methods to common file
o Follow r275640 and correct MMIO registers width
o Pass value to MMIO platform_note method.
Sponsored by: DARPA, AFRL
There are two main parts to get it to work, 1) most of the register
accesses need to be word sized, other than the config register which
needs to be byte aligned, and 2) we don't need the platform driver
for this to work on the Foundation Model, allow it to be NULL.
Differential Revision: https://reviews.freebsd.org/D1240
Reviewed by: bryanv
Sponsored by: The FreeBSD Foundation
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Add support for GEOM direct completion. Depending on the benchmark,
this tends to give a ~30% improvement w.r.t IOPs and BW.
- Remove an invariants check in the strategy routine. This assertion
is caught later on by an existing panic.
- Rename and resort various related functions to make more sense.
MFC after: 1 month
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
The prior change to not enable LRO by default has confused several
people. The configurations where LRO is problematic is not the
typical use case for VirtIO, and due to other issues, this often
requires checksum offloading to be disabled anyways.
PR: 185864
MFC after: 2 weeks
- Support the KDB alt break sequence to enter the debugger,
panic, reboot, etc. [1]
- Provide emergency write feature description. Note that QEMU
does not implement this feature.
- Make the VTCON_FLAG_* defines sequential once again.
- When the multiple port feature is not negotiated, query the
rows and columns of the one console during the device attach
when the size feature is negotiated.
- Report failure to the device if hot plugging a port fails.
- Acknowledge the console port event with an open event. This
is required by the spec, but QEMU doesn't seem to care.
Submitted by: Juniper [1]
MFC after: 1 month
Support for the multiport feature is mostly implemented, but currently
disabled due to some potential races in the hot plug code paths.
Requested by: marcel
MFC after: 1 month
Relnotes: yes
- Do not accumulate statistics on every tick.
- Accumulate statistics in vtnet_setup_stat_sysctl()
and in vtnet_get_counter().
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.
Basically no user API changes (some bugfixes in sys/net/netmap_user.h).
In detail:
1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.
2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial
3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.
4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.
5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).
A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.
Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.
This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.
A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.
MFC after: 3 days.
The Tx interrupt is now kept disabled in the common case, only
enabled when the number of free descriptors in the queue falls
below a threshold. Transmitted frames are cleared from the VQ
before subsequent transmit, or in the watchdog timer.
This was a very big performance improvement for an experimental
Netmap bhyve backend.
MFC after: 1 month
Prevent the Xen and VirtIO balloon drivers from marking pages as
wired. This prevents them from increasing the system wired page count,
which can lead to mlock failing because of hitting the limit in
vm.max_wired.
In the Xen case make sure pages are zeroed before giving them back to
the hypervisor, or else we might be leaking data. Also remove the
balloon_{append/retrieve} and link pages directly into the
ballooned_pages queue using the plinks.q field in the page struct.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, bryanv
Approved by: gibbs
dev/virtio/balloon/virtio_balloon.c:
- Don't allocate pages with VM_ALLOC_WIRED.
dev/xen/balloon/balloon.c:
- Don't allocate pages with VM_ALLOC_WIRED.
- Make sure pages are zeroed before giving them back to the
hypervisor.
- Remove the balloon_entry struct and the balloon_{append/retrieve}
functions and use the page plinks.q entry to link the pages
directly into the ballooned_pages queue.
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
The header structure consists of two 1-byte elements, but it must always
be describable by a single SG entry. Note for consistency, specify the
alignment everywhere, even if the structure has the appropriate natural
alignment since it contains a uint16_t.
Obtained from: DragonFlyBSD
MFC after: 1 week
These defines are applicable to userland too, but virtqueue.h contains
the kernel virtqueue interface, and is therefore not usable in userland.
Note that Linux places these defines in virtio_ring.h, but I don't want
the drivers including this header file to keep the VirtIO ring opaque to
everything but the virtqueue.
MFC after: 1 week
The eventual goal is to share this file with userland, so
remove the macro that is only specific for virtio_pci(4).
Instead, add the VIRTIO_PCI_CONFIG_OFF macro from Linux to
get the config size whether MSIX is enabled or not.
MFC after: 1 week
A similar fix should be applied to vmxnet, ixgbe, igb, i40e.
(some of them previously reported by Michael Tuexen)
Drivers using if_transmit are correct, and so are most of the
other drivers that reassing if_transmit.
Among other things, this bug causes panics when using netmap emulation
on top of generic drivers.
Approved by: bryanv
MFC after: 3 days
Reorganize the previous contexts of the file as it is in Linux. The
eventual goal is to install the header files and share them between
the kernel and bhyve.
MFC after: 1 week
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
The sglist segment array has grown to a bit over 512 bytes (on
64-bit system) which is more than ideally should be put on the
stack. Instead allocate an appropriately sized sglist and hang
it off each Rx/Tx queue structure.
Bump the maximum number of Tx segments to 64 to make it unlikely
we'll have defragment an mbuf chain. Our previous count was
rounded up to this value since it is the next power of two, so
effective memory usage should not change.
Also only allocate the maximum number of Tx segments if TSO was
negotiated.
