Commit Graph

34433 Commits

Author SHA1 Message Date
peter
7766c8cbe4 Reconnect pcvt hooks..
Reviewed by:	core
1999-01-01 08:45:44 +00:00
peter
56b4a2fa96 Part 4 of pcvt/voxware revival: pcvt userland
Reviewed by:    core
1999-01-01 08:32:05 +00:00
peter
c93aa8139a Part 4 of pcvt/voxware revival: pcvt userland
Reviewed by:	core
1999-01-01 08:31:26 +00:00
peter
e6cf3a438f Part 3 of the pcvt/voxware revival.
Reviewed by:	core
1999-01-01 08:23:23 +00:00
peter
d713c6aca4 Part 2 of pcvt/voxware revival. I hope I have not clobbered any other
deltas, but it is possible since I had a few merge conflicts over the last
few days while this has been sitting ready to go.

(Part 1 was committed to the config files, but cvs aborted grrr..)

Approved by:    core
1999-01-01 08:18:13 +00:00
peter
cfef427a39 Part 1 of pcvt/voxware revival. I hope I have not clobbered any other
deltas, but it is possible since I had a few merge conflicts over the last
few days while this has been sitting ready to go.

Approved by:	core
1999-01-01 08:09:58 +00:00
peter
59c8ef1b2e Oops, forgot to commit entry in LINT for statically configured vinum. 1999-01-01 04:16:32 +00:00
dillon
e4a4ff7180 The mount_mfs process that stays in a supervisor context handling MFS
I/O requests must be marked P_SYSTEM because if it isn't and the system
    decides to swap it or (god forbid) kill it, the system stands a good
    chance of locking up.
1999-01-01 04:14:11 +00:00
obrien
fe68a835f9 document PKG_DBDIR
Add ENVIRONMENT and FILES sections.
1998-12-31 20:29:29 +00:00
obrien
cc8ed78bf6 change wording slightly to match other pkg_*.1 1998-12-31 20:28:55 +00:00
wpaul
ef9b43fe9a This commit adds a software workaround for a hardware bug in certain PNIC
chip revisions. (A buggy taiwanese chip? I'm just shocked; shocked I tell
you.) So far I have only observed the anomalous behavior on board with
PCI revision 33 chips. At the moment, this seems to include only the
Netgear FA310-TX rev D1 boards with chips labeled NGMC169B. (Possibly this
means it's an 82c169B part from Lite-On.)

The bug only manifests itself in promiscuous mode, and usually only at
10Mbps half-duplex. (I have not observed the problem in full-duplex mode,
and I don't think it ever happens at 100Mbps.) The bug appears to be in
the receiver DMA engine. Normally, the chip is programmed with a linked
list of receiver descriptors, each with a receive buffer capable of holding
a complete full-sized ethernet frame. During periods of heavy traffic
(i.e. ping -c 100 -f 8100 <otherhost>), the receiver will sometimes appear
to upload its entire FIFO memory contents instead of just uploading the
desired received frame. The uploaded data will span several receive
buffers, in spite of the fact that the chip has been told to only use
one descriptor per frame, and appears to consist of previously transmitted
frames with the correct received frame appended to the end.

Unfortunately, there is no way to determine exactly how much data is
uploaded when this happens; the chip doesn't tell you anything except the
size of the desired received frame, and the amount of bogus data varies.
Sometimes, the desired frame is also split across multiple buffers.

The workaround is ugly and nasty. The driver assembles all of the data
from the bogus frames into a single buffer. The receive buffers are always
zeroed out, and we program the chip to always include the receive CRC
at the end of each frame. We therefore know that we can start from the
end of the buffer and scan back until we encounter a non-zero data byte,
and say conclusively that this is the end of the desired frame. We can
then subtract the frame length from this address to determine the real
start of the frame, and copy it into an mbuf and pass it on.

This is kludgy and time consuming, but it's better than dropping frames.
It's not too bad since the problem only happens at 10Mbps.

The workaround is only enabled for chips with PCI revision == 33. The
LinkSys LNE100TX and Matrox FastNIC 10/100 cards use a revision 32 chip
and work fine in promiscuous mode. Netgear support has confirmed that
they "have some previous knowledge of problems in promiscuous mode" but
didn't have a workaround. The people at Lite-On who would be able to
suggest a possible fix are on vacation. So, I decided to implement a
workaround of my own until I hear from them. I suppose this problem made
it through Netgear's QA department since Windows doesn't normally use
promiscuous mode, and if Windows doesn't need the feature than it can't
possibly be important, right? Grrr.
1998-12-31 17:19:21 +00:00
billf
f2bdd08367 Typo - "the -delete primary do not.." -> "the -delete primary does not.."
PR:		docs/9255
Submitted by:	Christian Weisgerber <naddy@bigeye.rhein-neckar.de>
1998-12-31 16:21:51 +00:00
wosch
5084191438 Happy 1999! 1998-12-31 14:26:42 +00:00
abial
38242090af Add timeout to boot menu.
Submitted by:	W Gerald Hicks <wghicks@bellsouth.net>
1998-12-31 14:06:30 +00:00
abial
25196ce9dd Add support for some FACILITY words:
key? ( -- flag)  \ check to see if there's a key to be read from input
ms   ( u -- )    \ wait that many milliseconds
seconds ( -- u ) \ get number of seconds from midnight.

'words' now outputs the list page by page - this probably should go
through libstand's pager, but will have to wait for closer integration of
built-ins with Forth...

Submitted partially by:	W Gerald Hicks <wghicks@bellsouth.net>
1998-12-31 14:03:28 +00:00
abial
b3642b0f23 Add back ability to make beeps when using new TERM_EMU.
Submitted by:	W Gerald Hicks <wghicks@bellsouth.net>
1998-12-31 13:44:04 +00:00
des
954bb541a6 Activate the rain screensaver. 1998-12-31 13:42:00 +00:00
des
6cca565635 Here's one for the terminally melancholic amongst us. 1998-12-31 13:41:40 +00:00
des
62999a1b47 Eliminate "initialization from incompatible type" warning in SAVER_MODULE
macro.
1998-12-31 13:40:26 +00:00
des
f89c9a2fd4 Compile without warnings. 1998-12-31 13:38:59 +00:00
bde
50820413ec Removed garbage sloppy-common variable `pasleep'. Fixed other style
bugs in previous commit.
1998-12-31 13:23:16 +00:00
kato
ac86a7036b Enables snd driver. 1998-12-31 11:38:52 +00:00
peter
bd22ed82de When loading something that has undefined symbols, it would be helpful to
know what they were..
1998-12-31 09:17:20 +00:00
luigi
dd2f1cf30c Enable the ES1370 driver. You don't need any options for this,
the existing "device pcm..." entry will take care of that.
1998-12-31 08:17:08 +00:00
luigi
33a313ee9d Add Joachim Kuebart's ES1370 driver. With my Shuttle HOT-255 card,
this has a problem with capture but i am not sure if it is related
to the mixer or what else.
But in the meantime, this is ok to listen to mpegs.

I also have a much simpler version of the driver in the works which
reuses a lot more of the existing "pcm" routines.  Next year...
1998-12-31 08:14:27 +00:00
luigi
3e838c08da Enable entries for DUMMYNET, BRIDGE and device pcm. LINT compiles
fine with these enabled.
1998-12-31 08:03:52 +00:00
imp
80cfe36847 Added notes about upcoming uid/gid mta for the postfix integration.
Suggested by: peter

Also reworked the 981230 section in light of a better understanding of
what is in the pipeline.
1998-12-31 08:01:12 +00:00
luigi
3711d7ec1d Remove one unused variable. 1998-12-31 07:52:49 +00:00
luigi
09f08ede8d Partial fix for when ipfw is used with bridging. Bridged packets
have all fields in network order, whereas ipfw expects some to be
in host order. This resulted in some incorrect matching, e.g. some
packets being identified as fragments, or bandwidth not being
correctly enforced.
NOTE: this only affects bridge+ipfw, normal ipfw usage was already
correct).

Reported-By: Dave Alden and others.
1998-12-31 07:43:29 +00:00
luigi
d3efa9889b Remove some unused variables. 1998-12-31 07:35:49 +00:00
luigi
84df373829 Extend the callback mechanism and add hooks to support PCI cards.
Remove a few unused variables.
1998-12-31 07:34:01 +00:00
luigi
7f0ec02562 Update documentation on cards and config 1998-12-31 07:28:24 +00:00
imp
5ad7ce8c7f Add impending flag day for ELF. Make notes about elf userland and elf
kernel forced migration happening soon.

While still incomplete, and there may be showstoppers along the way,
the advise given here is not incorrect.

Submitted indirectly by: jdk, peter wemm
1998-12-31 06:20:01 +00:00
kato
406890324e Add SMC EtherEZ98 support(PC-98).
Slim up of if_ed98.h.

Submitted by:	Chiharu Shibata <chi@bd.mbn.or.jp>
1998-12-31 03:23:39 +00:00
kato
0539734ce1 Another(better) way to support Access/NOTE N98(PC-98) without any effects
for other Access/PC series.

Submitted by:	Chiharu Shibata <chi@bd.mbn.or.jp>
1998-12-31 03:21:14 +00:00
jkh
4fc63e8029 Eliminate all dependence on boot1 and boot2. This is passed in by
Set_Boot_Blocks() anyway and should thus have never been a part of
libdisk, it should have been provided by the client of libdisk since
passing the information in is already part of the API.
1998-12-31 02:35:43 +00:00
sos
241d58f7a2 Commit patch in
PR: 9232
Submitted by:	marcel@scc.nl <Marcel Moolenaar>
1998-12-30 21:20:00 +00:00
sos
9023a71340 Commit #2 of
PR: 9235
Submitted by:	marcel@scc.nl <Marcel Moolenaar>
1998-12-30 21:01:34 +00:00
sos
d2eceef518 Commit #1 of:
PR: 9235
1998-12-30 20:58:28 +00:00
hoek
5c28191e13 -make clear need to use the upgrade kit
-add "depends" to list of recursive targets
-consistent capitilization of FreeBSD.ORG
-remove description of PATCH_DEBUG
-add .Xr to portcheckout(1) and pib(1)
1998-12-30 17:32:47 +00:00
jkh
174157b2de Transition libdisk to use /boot since what it's looking for (boot1 and boot2)
are now there.
1998-12-30 13:29:11 +00:00
bde
c7d4679276 Backed out previous commit. It depends on a.out utilities and libraries
somehow being available even on pure elf systems.
1998-12-30 12:06:08 +00:00
bde
64edc80b7a Fixed bootstrapping of /usr/mdec/boot[12]. 1998-12-30 11:26:24 +00:00
yokota
5a32103859 Make the VESA KLD module work! 1998-12-30 11:21:08 +00:00
bde
ddd867ad2c Always build ${MACHINE}/boot if it exists. Makefiles shouldn't know
about deficiencies in subdirs.
1998-12-30 11:17:09 +00:00
bde
ac17bd0978 Enforce building with -aout, since building with OBJFORMAT=elf doesn't
work.

Rely on ../Makefile.inc to set the the default for BINDIR.
1998-12-30 10:55:50 +00:00
bde
f0d9a217f5 Rely on ../Makefile.inc to set the object format in CFLAGS and the
default for BINDIR.

Fixed some style bugs in previous aout enforcement.
1998-12-30 10:48:09 +00:00
dfr
9aad9d912f Various changes to support OSF1 emulation:
* Move the user stack from VM_MAXUSER_ADDRESS to a place below the 32bit
  boundary (needed to support 32bit OSF programs).  This should also save
  one pagetable per process.
* Add cvtqlsv to the set of instructions handled by the floating point
  software completion code.
* Disable all floating point exceptions by default.
* A minor change to execve to allow the OSF1 image activator to support
  dynamic loading.
1998-12-30 10:38:59 +00:00
bde
14201fe4fa Enforce building with -aout, since building with OBJFORMAT=elf doesn't
work.
1998-12-30 10:37:45 +00:00
bde
b16cf02538 Enforce building with -aout, since building with OBJFORMAT=elf doesn't
work.

Rely on ../Makefile.inc to set the the default for BINDIR.

Removed comments about installing links to bootxx and xxboot.
1998-12-30 10:34:48 +00:00