to not get any cross-device I/O requests. (The unallocated first page
protecting BSD labels already gave us this, but that hack may go away
at some point in time).
Remove the check for cross-device I/O requests in swap_pager_strategy.
Move the repeated statistics updating into flushchainbuf().
larger than normal frames, to account for the case where a bge(4) NIC
is used with VLANs. Since we set the IFCAP_VLAN_MTU flag, we must allow
reception of frames up to 1522 bytes in size rather than 1518.
Note that it is possible to work around this bug by doing:
# ifconfig bge0 mtu 1504
prior to configuring any VLAN interfaces.
o Remove alpha specific timer code (mc146818A) and compiled-out
calibration of said timer.
o Remove i386 inherited timer code (i8253) and related acquire and
release functions.
o Move sysbeep() from clock.c to machdep.c and have it return
ENODEV. Console beeps should be implemented using ACPI or if no
such device is described, using the sound driver.
o Move the sysctls related to adjkerntz, disable_rtc_set and
wall_cmos_clock from machdep.c to clock.c, where the variables
are.
o Don't hardcode a hz value of 1024 in cpu_initclocks() and don't
bother faking a stathz that's 1/8 of that. Keep it simple: hz
defaults to HZ and stathz equals hz. This is also how it's done
for sparc64.
o Keep a per-CPU ITC counter (pc_clock) and adjustment (pc_clockadj)
to calculate ITC skew and corrections. On average, we adjust the
ITC match register once every ~1500 interrupts for a duration of
2 consequtive interruprs. This is to correct the non-deterministic
behaviour of the ITC interrupt (there's a delay between the match
and the raising of the interrupt).
o Add 4 debugging sysctls to monitor clock behaviour. Those are
debug.clock_adjust_edges, debug.clock_adjust_excess,
debug.clock_adjust_lost and debug.clock_adjust_ticks. The first
counts the individual adjustment cycles (when the skew first
crosses the threshold), the second counts the number of times the
adjustment was excessive (any non-zero value is to be considered
a bug), the third counts lost clock interrupts and the last counts
the number of interrupts for which we applied an adjustment
(debug.clock_adjust_ticks / debug.clock_adjust_edges gives the
avarage duration of an individual adjustment -- should be ~2).
While here, remove some nearby (trivial) left-overs from alpha and
other cleanups.
swapbkva. Swapbkva mappings are explicitly managed using pmap_qenter(),
not on-demand by vm_fault(), making kmem_alloc_nofault() more appropriate.
Submitted by: tegge
generate the inode mode from a default ACL and creation mask,
implement ufs_sync_inode_from_acl() using acl_posix1e_newfilemode().
Since ACL_OVERRIDE_MASK/ACL_PRESERVE_MASK are defined, we no
longer need to explicitly pass in a "preserve_mask" field: this
is implicit in the use of POSIX.1e semantics.
Note: this change contains a semantic bugfix for new file creation:
we now intersect the ACL-generated mode and the cmode requested by
the user process. This means permissions on newly created file
objects will now be more conservative. In the future, we may want
to provide alternative semantics (similar to Solaris and Linux) in
which the ACL mask overrides the umask, permitting ACLs to broaden
the rights beyond the requested umask.
PR: 50148
Reported by: Ritz, Bruno <bruno_ritz@gmx.ch>
Obtained from: TrustedBSD Project
support routines in kern_acl.c:
- Define ACL_OVERRIDE_MASK and ACL_PRESERVE_MASK centrally in acl.h: the
mode bits that are (and aren't) stored in the ACL.
- Add acl_posix1e_acl_to_mode(): given a POSIX.1e extended ACL, generate
a compatibility mode (only the bits supported by the POSIX.1e ACL).
- acl_posix1e_newfilemode(): Given a requested creation mode and default
ACL, calculate the mode for the new file system object (only the bits
supported by the POSIX.1e ACL).
PR: 50148
Reported by: Ritz, Bruno <bruno_ritz@gmx.ch>
Obtained from: TrustedBSD Project
cases:
- Setting sticky bit on non-directory
- Setting setgid on a file with a group that isn't in the effective
or extended groups of the authorizing credential
I.e., test the requirement first, then do the privilege test,
rather than doing the privilege test regardless of the need for
privilege.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
interrupting user mode. The net effect of this bug is that a clock
interrupt does not cause rescheduling and processes are not
preempted. It only takes a "while (1);" to render the machine
useless.
This bug was introduced by the context changes and EPC syscall code.
Handling of ASTs was moved to C for clarity and ease of maintenance,
but was not added for the external interrupt case.
This needs to be revisited. We now have calls to do_ast() in trap(),
break_syscall() and ivt_External_Interrupt(). A single call in
exception_restore covers these 3 places without duplication. This
is where we handled ASTs prior to the overhaul, except that the
meat has been moved to do_ast(), a C function. This was the goal
to begin with.
Pointy hat: marcel
Use ->bio_children to count child buffers, rather than abuse the
bio_caller1 pointer.
Expand the relevant bits of waitchainbuf() inline, this clarifies
the code a little bit.
striping to a per device round-robin algorithm.
Because of the policy of not attempting to retain previous swap
allocation on page-out, this means that a newly added swap device
almost instantly takes its 1/N share of the I/O load but it takes
somewhat longer for it to assume it's 1/N share of the pages if there
is plenty of space on the other devices.
Change the 8G total swapspace limitation to 8G per device instead
by using a per device blist rather than one global blist. This
reduces the memory footprint by 75% (typically a couple hundred
kilobytes) for the common case with one swapdevice but NSWAPDEV=4.
Remove the compile time constant limit of number of swap devices,
there is no limit now. Instead of a fixed size array, store the
per swapdev structure in a TAILQ.
Total swap space is still addressed by a 32 bit page number and
therefore the upper limit is now 2^42 bytes = 16TB (for i386).
We still do not allocate the first page of each device in order to
give some amount of protection to any bsdlabel at the start of the
device.
A new device is appended after the existing devices in the swap space,
no attempt is made to fill in holes left behind by swapoff (this can
trivially be changed should it ever become a problem).
The sysctl vm.nswapdev now reflects the number of currently configured
swap devices.
Rename vm_swap_size to swap_pager_avail for consistency with other
exported names.
Change argument type for vm_proc_swapin_all() and swap_pager_isswapped()
to be a struct swdevt pointer rather than an index.
Not changed: we are still using blists to manage the free space,
but since the swapspace is no longer fragmented by the striping
different resource managers might fare better.
concurrent invocations from acquiring the same address(es). Also, in case
of an incomplete allocation, free any allocated pages.
In collaboration with: tegge
sure that uma_dbg_free() is called if we're about to call
uma_zfree_internal() but we're asking it to skip the dtor and
uma_dbg_free() call itself. So, if we're about to call
uma_zfree_internal() from uma_zfree_arg() and skip == 1, call
uma_dbg_free() ourselves.
EFI file system. When booting from a CD and there's already an EFI
system partition on the disk, setting the current device to unit 0
will select the harddisk. This invariably breaks installing FreeBSD
when other operating systems have been installed before.
We obviously want to do the same when we're booting over the network.
Maybe later.
Based on a patch (from memory) from: arun
there is code that blindly allocates LDTEs starting at slot 6
and I quess it doesn't really matter to us if they overwrite the BSDI
syscall slot, since it isn't a BSDI binary. Also add some code to help track
down other such users (commented out for now).
Reviewed by: deischen@
o correct BSSID setup in ah_writeAssocid for 5211 and 5212 (fixes
reception of broadcast frames after association)
o correct transmit retry counts returned by 5211 in ah_procTxDesc
o add missing regulatory domain support that caused use of 11b channels to be
disallowed with some cards (e.g. mini-pci cards in certain IBM laptops)
o miscellaneous fixes to regulatory domain support
o increase size of 5212 ANI table to avoid overflow
o add monitor mode
o remove OS_QSORT support
o fix handling of HAL_RXDESC_INTREQ in ah_setupRxDesc
o rewrite 5212 descriptor handling for portability
o FreeBSD: track alq_open API change
type. We know about header types 0, 1 and 2. Ignore the rest in the
MD i386 code when we're looking for bridges. You cannot look at the
vendor tag. And if you don't you certainly can't look at function > 0
if the device isn't there.
The new soekris boards' GEODE cpu has issues with the old way. This
is reported to have fixed it.
MFC After: 2 days
considered to be good to try when it otherwise has no clue about which
interrupts to try. This is a band-aide and we really should try to
balance the IRQs that we arbitrarily pick, but it should help some
people that would otherwise get bad IRQs.
recompiling the driver. See the comments near the top of "if_em.h"
for descriptions of these delays. Four new loader tunables control
the system-wide default values:
hw.em.tx_int_delay
hw.em.rx_int_delay
hw.em.tx_abs_int_delay
hw.em.rx_abs_int_delay
The tunables are specified in microseconds. The valid range is
0-67108 usec., and 0 means that the timer is disabled.
There are also four new sysctls (actually, a set of four for each
"em" device in the system) to query and change the interrupt delays
after the system is up:
hw.em0.tx_int_delay
hw.em0.rx_int_delay
hw.em0.tx_abs_int_delay (not present for 82542/3/4 adapters)
hw.em0.rx_abs_int_delay (not present for 82542/3/4 adapters)
It seems to be OK to change these values even while the adapter is
passing traffic.
Approved by: Prafulla Deuskar <pdeuskar@FreeBSD.ORG>
MFC after: 4 weeks
