o) Give a virtual address for I/O ports on n64.
o) On the Portwell CAM-0100, return the right IRQ for the on-board SATA.
o) Except on bridges, only set PORTEN and MEMEN on devices that have I/O or
memory BARs respectively.
o) Disable PORTEN and MEMEN while reprogramming BARs.
o) On the Lanner MR-955, set the Tx DMA power register for the on-board Promise
SATA controller.
- Check for SMAP data from the loader first. If it exists, don't bother
doing any VM86 calls at all. This will be more friendly for non-BIOS
boot environments such as EFI, etc.
- Move the base memory setup into a new basemem_setup() routine instead
of duplicating it.
- Simplify the XEN case by removing all of the VM86/SMAP parsing code rather
than just jumping over it.
- Adjust some comments to better explain the code flow.
MFC after: 2 weeks
un-expiring.
The previous version of code have no locking when testing rt_refcnt.
The result of the lack of locking may result in a condition where
a routing entry have a reference count but at the same time have
RTPRF_OURS bit set and an expiration timer. These would eventually
lead to a panic:
panic: rtqkill route really not free
When the system have ICMP redirects accepted from local gateway
in a moderate frequency, for instance.
Commit this workaround for now until we have some better solution.
PR: kern/149804
Reviewed by: bz
Tested by: Zhao Xin, Pete French
MFC after: 2 weeks
specific devfs path already exists.
The function will be used from kern_conf.c to detect duplicate device
registrations. Callers must hold the devmtx mutex.
Reviewed by: kib
links. The reference counting is needed to be able to determine if a
specific devfs path exists. For true device file paths we can traverse
the cdevp_list but a separate directory list is needed for user created
symbolic links.
Add a new directory entry flag DE_USER to mark entries which should
unreference their parent directory on deletion.
A new function to traverse cdevp_list and the directory list will be
introduced in a separate commit.
Idea from: kib
Reviewed by: kib
- XLS B0 and later revision chips have PCIe link 2 & 3 mapped to different
PIC interrupts. Update pic.h, board.h and xlr_pci.c to reflect this.
- remove debug prints in xlr_pci.c
- add more processor IDs to board.h, add function xlr_is_xls_b0()
- some style(9) and whitespace fixes
Retry IO once with ZIO_FLAG_TRYHARD before declaring a pool faulted
OpenSolaris revision and Bug IDs:
9725:0bf7402e8022
6843014 ZFS B_FAILFAST handling is broken
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6843014)
MFC after: 3 weeks
OpenSolaris revision and Bug IDs:
9701:cc5b64682e64
6803605 should be able to offline log devices
6726045 vdev_deflate_ratio is not set when offlining a log device
6599442 zpool import has faults in the display
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6803605, 6726045, 6599442)
MFC after: 3 weeks
stack unwinding, instead of naively trying to check the instruction at
that location. This fixes signal handling in threaded applications after
recent changes regarding unwinding in libthr. While here, clean up our
MD_FROB_UPDATE_CONTEXT() implementation a little.
This is especially useful for things like installers, where regular
geli prompt can't be used.
- Add support for specifing multiple -K or -k options, so there is no
need to cat all keyfiles and read them from standard input.
Requested by: Kris Moore <kris@pcbsd.org>, thompsa
MFC after: 2 weeks
it is incompatible with stack unwinding code, if they are invoked,
disable stack unwinding for current thread, and when thread is
exiting, print a warning message.
not be used outside of the reassembly queue implementation. Provide a new
function to flush all segments from a reassembly queue and call it from the
appropriate places instead of manipulating the queue directly.
Sponsored by: FreeBSD Foundation
Reviewed by: andre, gnn, rpaulo
MFC after: 2 weeks
for them, two functions _pthread_cancel_enter and _pthread_cancel_leave
are added to let thread enter and leave a cancellation point, it also
makes it possible that other functions can be cancellation points in
libraries without having to be rewritten in libthr.
these could be made dependent on either of the octusb or octe options, but
making them standard fixes a number of option combinations that were previously
broken.
- looking for partition with 'bootonce' attribute alone (without 'bootme'
attribute), removing it and logging that we successfully booted from this
partition.
- looking for partitions with 'bootfailed' attribute, removing it and
logging that we failed to boot from this partition.
Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 2 weeks
clean up most layering violations:
sys/boot/i386/common/rbx.h:
RBX_* defines
OPT_SET()
OPT_CHECK()
sys/boot/common/util.[ch]:
memcpy()
memset()
memcmp()
bcpy()
bzero()
bcmp()
strcmp()
strncmp() [new]
strcpy()
strcat()
strchr()
strlen()
printf()
sys/boot/i386/common/cons.[ch]:
ioctrl
putc()
xputc()
putchar()
getc()
xgetc()
keyhit() [now takes number of seconds as an argument]
getstr()
sys/boot/i386/common/drv.[ch]:
struct dsk
drvread()
drvwrite() [new]
drvsize() [new]
sys/boot/common/crc32.[ch] [new]
sys/boot/common/gpt.[ch] [new]
- Teach gptboot and gptzfsboot about new files. I haven't touched the
rest, but there is still a lot of code duplication to be removed.
- Implement full GPT support. Currently we just read primary header and
partition table and don't care about checksums, etc. After this change we
verify checksums of primary header and primary partition table and if
there is a problem we fall back to backup header and backup partition
table.
- Clean up most messages to use prefix of boot program, so in case of an
error we know where the error comes from, eg.:
gptboot: unable to read primary GPT header
- If we can't boot, print boot prompt only once and not every five
seconds.
- Honour newly added GPT attributes:
bootme - this is bootable partition
bootonce - try to boot from this partition only once
bootfailed - we failed to boot from this partition
- Change boot order of gptboot to the following:
1. Try to boot from all the partitions that have both 'bootme'
and 'bootonce' attributes one by one.
2. Try to boot from all the partitions that have only 'bootme'
attribute one by one.
3. If there are no partitions with 'bootme' attribute, boot from
the first UFS partition.
- The 'bootonce' functionality is implemented in the following way:
1. Walk through all the partitions and when 'bootonce'
attribute is found without 'bootme' attribute, remove
'bootonce' attribute and set 'bootfailed' attribute.
'bootonce' attribute alone means that we tried to boot from
this partition, but boot failed after leaving gptboot and
machine was restarted.
2. Find partition with both 'bootme' and 'bootonce' attributes.
3. Remove 'bootme' attribute.
4. Try to execute /boot/loader or /boot/kernel/kernel from that
partition. If succeeded we stop here.
5. If execution failed, remove 'bootonce' and set 'bootfailed'.
6. Go to 2.
If whole boot succeeded there is new /etc/rc.d/gptboot script coming
that will log all partitions that we failed to boot from (the ones with
'bootfailed' attribute) and will remove this attribute. It will also
find partition with 'bootonce' attribute - this is the partition we
booted from successfully. The script will log success and remove the
attribute.
All the GPT updates we do here goes to both primary and backup GPT if
they are valid. We don't touch headers or partition tables when
checksum doesn't match.
Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 2 weeks
attribute (it should be allowed only to unset it), but for test purposes it
might be useful, so the current code allows it.
Reviewed by: arch@ (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
MFC after: 2 weeks
