Commit Graph

1424 Commits

Author SHA1 Message Date
imp
1912ffb2e5 Add ISA PNP tables to ISA drivers. Fix a few incidental comments.
ACPI ISA PBP tables not tagged, there's bigger issues with them.
2018-01-29 00:22:30 +00:00
imp
fe188c2961 On further testing on actual machines with this hardware, we should
only warn for devices that are attached. Add missing \n.
2017-12-30 08:16:31 +00:00
imp
9afedc5ef7 Warn when nonPNP ISA devices are attached in GENERIC that they are
being removed from GENERIC in 12. Always print PNP info for ISA when
it exists: it doesn't depend on ISAPNP. Add PNP ID to orm and vga to
prevent us from warning about them since those devices aren't being
removed from GENERIC. PNP devices will be removed from GENERIC too,
but they will be automatically loaded, so need no warning. We don't
warn for non-GENERIC kernels because people running them are presumed
to know what they are doing.

MFC After: 2 weeks
2017-12-23 22:57:14 +00:00
imp
a4df4718d4 Fix cut-and-paste error s/pccard/isa/ 2017-12-23 07:02:45 +00:00
imp
0bcbe21d68 Create a new ISA_PNP_INFO macro. Use this macro every where we have
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
2017-12-23 06:49:27 +00:00
pfg
78a6b08618 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
pfg
4736ccfd9c sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
pfg
9da7bdde06 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
kib
b53cf0d5b7 Remove i386 XBOX support.
It is for console presented at 2001 and featuring Pentium III
processor.  Even if any of them are still alive and run FreeBSD, we do
not have any sign of life from their users.  While removing another
dozens of #ifdefs from the i386 sources reduces the aversion from
looking at the code and improves the platform vitality.

Reviewed by:	cem, pfg, rink (XBOX support author)
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D13016
2017-11-16 14:27:02 +00:00
bde
fce552fb16 Use better hard-coded defaults for the cursor shape, and remove nearby
redundant initializations.

Hard-code base = 0, height = (approx. 1/8 of the boot-time font height)
in all cases, and remove the BIOS/MD support for setting these values.
This asks for an underline cursor sized for the boot-time font instead
of various less hard-coded but worse values.  I used that think that
the x86 BIOS always gave the same values as the above hard-coding, but
on 1 of my systems it gives the wrong value of base = 1.

The remaining BIOS fields are shift_state and bell_pitch.  These are now
consistently not explicitly reinitialized to 0.  All sc_get_bios_value()
functions except x86's are now empty, and the only useful thing that x86
returns is shift_state.  This really belongs in atkbdc, but heavier
use of the BIOS to read the more useful typematic rate has been removed
there.  fb still makes much heavier use of the BIOS.
2017-08-19 19:33:16 +00:00
ian
7ba2756fac Stop calling atrtc_set() from the xen timer clock_settime() method. That
removes the only reference to atrtc_set() from outside of atrtc.c, so make
it static.

The xen timer driver registers as a realtime clock with 1us resolution.  In
the past that resulted in only the xen timer's clock_settime() getting
called, so it would call atrtc_set() to set the hardware clock as well.  As
of r32090, the clock_settime() method of all registered realtime clocks gets
called, so the xen driver no longer needs to chain-call the lower-resolution
driver.

Thanks to royger@ for talking me through the xen stuff, and for testing.
2017-08-11 19:02:11 +00:00
ian
242599409b Protect access to the AT realtime clock with its own mutex.
The mutex protecting access to the registered realtime clock should not be
overloaded to protect access to the atrtc hardware, which might not even be
the registered rtc. More importantly, the resettodr mutex needs to be
eliminated to remove locking/sleeping restrictions on clock drivers, and
that can't happen if MD code for amd64 depends on it. This change moves the
protection into what's really being protected: access to the atrtc date and
time registers.

This change also adds protection when the clock is accessed from
xentimer_settime(), which bypasses the resettodr locking.

Differential Revision:	https://reviews.freebsd.org/D11483
2017-07-12 02:42:57 +00:00
imp
7e6cabd06e Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
nyan
259480b6de Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
pfg
ffb7443159 sys/isa: minor spelling fixes.
No functional change.
2016-05-03 21:51:52 +00:00
royger
390486acbc atrtc: export function to set RTC
This is going to be used by the Xen clock on Dom0 in order to set the RTC of
the host. The current logic in atrtc_settime is moved to atrtc_set and the
unused device_t parameter is removed from the atrtc_set function call so it
can be safely used by other callers.

Sponsored by:		Citrix Systems R&D
Reviewed by:		kib, jhb
Differential revision:	https://reviews.freebsd.org/D6067
2016-05-02 16:14:55 +00:00
pfg
e4188afba8 isa/pnp: for pointers replace 0 with NULL.
These are mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-14 17:20:35 +00:00
jhibbits
c55aa7292d Fix the resource_list_print_type() calls to use uintmax_t.
Missed a bunch from r297000.
2016-03-22 22:25:08 +00:00
jhibbits
70aaabfeac Replace all resource occurrences of '0UL/~0UL' with '0/~0'.
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0.  The maximum range of a
resource is 0xFFF.... (all bits of the full type set).  By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.

Reviewed By: cem
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
2016-03-03 05:07:35 +00:00
jhibbits
fbc9874dd0 Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()
Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differential Revision: https://reviews.freebsd.org/D5306
2016-02-19 03:37:56 +00:00
jhibbits
31bb8ee5bd Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
imp
9f008568e7 Remove vestiges of knowing the ISA bus, which we gave up on around 20
years ago. Remove redunant copy of isaregs.h.
2014-03-19 21:03:04 +00:00
marius
17e14c6132 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
jkim
7524282161 Move VT switching hack for suspend/resume from bus drivers to syscons.c
using event handlers.  A different version was

Submitted by:	Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
jhb
5512bf549d Retire isa_setup_intr() and isa_teardown_intr() and use the generic bus
versions instead.  They were never needed as bus_generic_intr() and
bus_teardown_intr() had been changed to pass the original child device up
in 42734, but the ISA bus was not converted to new-bus until 45720.
2011-05-06 13:48:53 +00:00
jhb
f226edd26e - Enable an extra debugging bootverbose printf when probing ISA PNP cards
listing   each card as it is found on non-PC98 (PC98 already had this).
- Increase the length of the DELAY() used before timing out while reading
  PNP resource data.

Tested by:	Steven Nikkel  steven_nikkel ertyu org
MFC after:	1 week
2011-03-29 12:38:13 +00:00
avg
c9fe8ad7f0 bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to:	r212213
MFC after:	10 days
2010-09-10 11:19:03 +00:00
jkim
686d769c8b When we are not switching VTs, just mark all buffer to be updated. 2010-07-15 23:11:51 +00:00
mav
d1175426d7 Implement new event timers infrastructure. It provides unified APIs for
writing event timer drivers, for choosing best possible drivers by machine
independent code and for operating them to supply kernel with hardclock(),
statclock() and profclock() events in unified fashion on various hardware.

Infrastructure provides support for both per-CPU (independent for every CPU
core) and global timers in periodic and one-shot modes. MI management code
at this moment uses only periodic mode, but one-shot mode use planned for
later, as part of tickless kernel project.

For this moment infrastructure used on i386 and amd64 architectures. Other
archs are welcome to follow, while their current operation should not be
affected.

This patch updates existing drivers (i8254, RTC and LAPIC) for the new
order, and adds event timers support into the HPET driver. These drivers
have different capabilities:
 LAPIC - per-CPU timer, supports periodic and one-shot operation, may
freeze in C3 state, calibrated on first use, so may be not exactly precise.
 HPET - depending on hardware can work as per-CPU or global, supports
periodic and one-shot operation, usually provides several event timers.
 i8254 - global, limited to periodic mode, because same hardware used also
as time counter.
 RTC - global, supports only periodic mode, set of frequencies in Hz
limited by powers of 2.

Depending on hardware capabilities, drivers preferred in following orders,
either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC.
User may explicitly specify wanted timers via loader tunables or sysctls:
kern.eventtimer.timer1 and kern.eventtimer.timer2.
If requested driver is unavailable or unoperational, system will try to
replace it. If no more timers available or "NONE" specified for second,
system will operate using only one timer, multiplying it's frequency by few
times and uing respective dividers to honor hz, stathz and profhz values,
set during initial setup.
2010-06-20 21:33:29 +00:00
jkim
8dd88ee724 Do not attempt to switch to the same VTs between suspend and resume. 2010-05-26 16:37:54 +00:00
jkim
21b2ea8d2f Let the first device suspend and the last device resume syscons(4). 2010-05-26 15:29:53 +00:00
jkim
b9a81424c9 Fix more style(9) nits that I missed in the previous commit. 2010-05-22 07:44:33 +00:00
jkim
e510df927a Fix style(9) nits. 2010-05-22 07:38:29 +00:00
jkim
64e597f078 Suspend screen updates when the video controller is powered down. 2010-05-22 07:35:17 +00:00
attilio
1b75a98556 Introduce the new kernel sub-tree x86 which should contain all the code
shared and generalized between our current amd64, i386 and pc98.

This is just an initial step that should lead to a more complete effort.
For the moment, a very simple porting of cpufreq modules, BIOS calls and
the whole MD specific ISA bus part is added to the sub-tree but ideally
a lot of code might be added and more shared support should grow.

Sponsored by:	Sandvine Incorporated
Reviewed by:	emaste, kib, jhb, imp
Discussed on:	arch
MFC:		3 weeks
2010-02-25 14:13:39 +00:00
mbr
7450f52a57 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
rnoland
3dc3ad8568 Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by:	jhb@
MFC after:	Not in this lifetime...
2009-12-29 21:51:28 +00:00
jkim
59d89f70e9 Attach dpms(4) to vgapm and make sure to restore DPMS state after
VGA is resumed properly.

Reviewed by:	jhb
2009-12-15 19:58:23 +00:00
jkim
1aa17d213d - Partially revert hackish r198964 and r199002.
- Add a proxy driver vgapm to help vgapci to save/load VGA state.
- Move device_set_desc() to the right place while we are here.

Reviewed by:	jhb
2009-11-12 17:56:56 +00:00
jkim
66cdd06426 Remove duplicate suspend/resume code from vga_pci.c and let vga(4) register
itself to an associated PCI device if it exists.  It is little bit hackish
but it should fix build without frame buffer driver since r198964.
Fix some style(9) nits in vga_isa.c while we are here.
2009-11-06 20:32:26 +00:00
jkim
bc53678aaf Save/restore VGA state from vga_pci.c instead of relying on vga_isa.c.
It was not working because we were saving its state after the device was
powered down.  Simplify vesa_load_state() as the culprit is fixed now.
2009-11-05 22:58:50 +00:00
jkim
ab813af85f Save/restore VGA color palette while suspending and resuming. 2009-11-04 00:58:20 +00:00
jhb
de920e4e3f Tweak the way that the ACPI and ISA bus drivers match hint devices to
BIOS-enumerated devices:
- Assume a device is a match if the memory and I/O ports match even if the
  IRQ or DRQ is wrong or missing.  Some BIOSes don't include an IRQ for
  the atrtc device for example.
- Add a hack to better match floppy controller devices.  Many BIOSes do not
  include the starting port of the floppy controller listed in the hints
  (0x3f0) in the resources for the device.  So far, however, all the BIOS
  variations encountered do include the 'port + 2' resource (0x3f2), so
  adjust the matching for "fdc" devices to look for 'port + 2'.

Reviewed by:	imp
MFC after:	3 days
2009-08-24 21:51:46 +00:00
mav
98565a1214 Rename statclock_disable variable to atrtcclock_disable that it actually is,
and hide it inside of atrtc driver. Add new tunable hint.atrtc.0.clock
controlling it. Setting it to 0 disables using RTC clock as stat-/
profclock sources.

Teach i386 and amd64 SMP platforms to emulate stat-/profclocks using i8254
hardclock, when LAPIC and RTC clocks are disabled.

This allows to reduce global interrupt rate of idle system down to about
100 interrupts per core, permitting C3 and deeper C-states provide maximum
CPU power efficiency.
2009-05-03 17:47:21 +00:00
mav
3bbbb5aadd Add resume methods to i8254 and atrtc devices. 2009-05-01 21:43:04 +00:00
jhb
782a5accb6 Allow syscons to work on amd64 and i386 without any hints:
- Enable keyboard autodetection by default for ISA syscons attachments.
- If there are no syscons hints at all, assume there is a single sc0 device
  anyway.  The console probe will still fail unless a VGA adapter is found.

MFC after:	2 weeks
2009-03-05 19:10:17 +00:00
jhb
c2251260be Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
imp
e4a289ae9d MFp4:
Make the ISA bus keep track of more PNP details.  Plus a minor style
fix while I'm here.  More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
2008-11-02 18:48:54 +00:00
imp
0c5040d71b MFp4 (my newcard tree):
ISACFGATTR_MULTI is unused.  Retire it, and a function that has no
side effects used to compute it.
2008-08-24 07:40:14 +00:00
phk
0f73a35e52 atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c
In addition to the device driver functionality, it exposes a number of
functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00