When we are detecting a partition table and didn't find PMBR, try to
read backup GPT header from the last sector and if it is correct,
assume that we have GPT.
Reviewed by: rpokala
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D4282
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Previous value was not enough on Arndale platform.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4145
During cv_wait we may be waiting for an event triggered by callout.
Run callbacks here to avoid code blocking.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4144
The initial IOCTL implementation supports reading disk physical
geometry.
Two additional functions were added. They allow reading/writing raw
data to the disk (default partition).
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4143
The detach function is called very often, for example from
get_capacity function. We don't want to loose any pointers
here, so disable detaching for umass driver.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4141
The PA adress must be gathered from an aligned VA,
not the RAW pointer to the memory space.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4140
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
No behavioral changes, just cosmetics.
A partition number of zero is not a wildcard, it's the 'a' partition in
a BSD slice, so don't print it as "<auto>". (Only slices are 1-based,
unit and partition numbers are 0-based and -1 is their wildcard marker.)
Also, after doing all the probing and choosing, print the final result as
"Booting from <disk spec>" where disk spec has all the wildcards resolved
and looks like familiar BSD slice-and-partition notation (disk0s3a, etc).
This was [re-]added in r127458 (apparently with disconnected history as well)
and never connected to the build.
It is no longer relevant for modern systems from the past 20 years.
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
the temporary file to vers.c at the end of the script
The previous logic wrote out to vers.c multiple times, so the file
could be incorrectly interpreted as being completely written out
after one of the echo calls with recursive make, when in reality it
was only partially written.
Also, in the event the build was interrupted when creating vers.c
(small race window), it would have a leftover file that needed to
be cleaned up before resuming the build.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
bytes of boot2. Since we're in 16-bit mode, we can't copy all 128kB at
once; instead we loop four times and copy 32 kB each time.
This change was made necessary by an upcoming increase in the size of the
boot2 binary; should it increase further, the COPY_BLKS value can be
adjusted without anyone needing to remember 8086 assembly language again.
Requested by: allanjude
Tested by: allanjude
MFC after: 1 week
hold the kernel, modules, and any other loaded data. This memory block
is relocated to the kernel's expected location during the transfer of
control from the loader to the kernel.
The GENERIC kernel on amd64 has recently grown such that a kernel + zfs.ko
no longer fits in the default staging size. Bump the default size from
32MB to 48MB to provide more breathing room.
PR: 201679
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3666
no option but to use the smbios information to fill in the blanks.
It's a good thing UGA is a protocol of the past and GOP has all the
info we need.
Anyway, the logic has been tweaked a little to get the easier bits
of information up front. This includes the resolution and the frame
buffer address. Then we look at the smbios information and define
expected values as well as the missing bits (frame buffer offset and
stride). If the values obtained match the expect values, we fill in
the blanks and return. Otherwise we use the existing detection logic
to figure it out.
Rename the environment variables from uga_framebuffer abd uga_stride
to hw.efifb.address and hw.efifb.stride. The latter names are more
in line with other variable names.
We currently have hardcoded settings for:
1. Mid-2007 iMac (iMac7,1)
2. Late-2007 MacBook (MacBook3,1)
striking a delicate balance between exhaustive searching and
banking on assumptions. The environment variables can be used
as a fall-back anyway. With this change, all known and tested
Macs with only UGA should have a working console out of the
box... for now...
in the frame buffer when we flip pixels. Allow the detection
to be bypassed by setting the uga_framebuffer and uga_stride
variables. The kernel console works fine even when we can't
detect pixel changes in the frame buffer, which indicates
that the problem could be with reading from the frame buffer
and not writing to it.
PCI BARs does not necessarily correspond to the upper-left
most pixel. Scan the frame buffer for which byte changed
when changing the pixel at (0,0).
Use the same technique to determine the stride. Except for
changing the pixel at (0,0), we change the pixel at (0,1).
PR: 202730
Tested by: hartzell (at) alerce.com
so they were disabled during DTS transition. Though there are
no standard devices/drivers on them people might use iic(4) userland
interface to access these buses.
command called 'uga' to show whether UGA is implemented by the
firmware and what the settings are. It also includes filling
the efi_fb structure from the UGA information when GOP isn't
implemented by the firmware.
Since UGA does not provide information about the stride, we
set the stride to the horizontal resolution. This is likely
not correct and we should determine the stride by trial and
error. For now, this should show something on the console
rather than nothing.
Refactor this file to maximize code reuse.
PR: 202730
command has the following sub-commands:
list - list all possible modes (paged)
get - return the current mode
set <mode> - set the current mode to <mode>
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
"fdt_file" and "fdtfile" U-Boot variables. Add one more check for
"fdt_file" loader(8) variable.
loader(8) variable takes precedence over u-boot env one
like RPI-B and RPI-2.
Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.
Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.
MFC after: 2 weeks
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files
PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176
For example, without this patch, the following three lines
in /boot/loader.conf would result in /boot/root.img being preloaded
twice, and two md(4) devices - md0 and md1 - being created.
initmd_load="YES"
initmd_type="md_image"
initmd_name="/boot/root.img"
Reviewed by: marcel@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3204
