uma_zone_reserve()), messages like the following appear on the console:
"Freed UMA keg (Test zone) was not empty (0 items). Lost 528 pages of
memory."
When keg_drain_domain() is draining the zone, it tries to keep the number
of items specified in the reservation. However, when we are destroying the
UMA zone, we do not need to keep those items. Therefore, when destroying a
non-secondary and non-cache zone, we should reset the keg reservation to 0
prior to draining the zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27129
This in particular unbreaks rtkit.
The limitation was a leftover of previous state, to quote a
comment:
/*
* Though lwpid is unique, only current process is supported
* since there is no efficient way to look up a LWP yet.
*/
Long since then a global tid hash was introduced to remedy
the problem.
Permission checks still apply.
Submitted by: greg_unrelenting.technology (Greg V)
Differential Revision: https://reviews.freebsd.org/D27158
This deduplicates 2 sets of caches using the same sizes.
Memory savings fluctuate a lot, one sample result is buildworld on zfs
saving ~180MB RAM in reduced page count associated with zio caches.
Refer to the Linux commit mentioned below for a more detailed description.
Linux commit:
a18177925c252da7801149abe217c05b80884798
Requested by: Isilon
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The revision r342168 broke ABI of ng_nat needlessly and
the change was merged to stable branches breaking ABI there, too.
Unbreak it.
PR: 250722
MFC after: 1 week
In r367327 generic_bs_sr_<n> were derived from mips. Given we are calling
generic_bs_w_<n> and no write directly, we do not have to do the address
calculations ourselves as eneric_bs_w_<n> will do a str val [bsh, offset].
All we actually have to do is increment offset.
MFC after: 3 days
There are workloads with very bursty tid allocation and since unr tries very
hard to have small-sized bitmaps it keeps reallocating memory. Just doing
buildkernel gives almost 150k calls to free coming from unr.
This also gets rid of the hack which tried to postpone TID reuse.
Reviewed by: kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27101
The intent is to replace the current id allocation method and a known upper
bound will be useful.
Reviewed by: kib (previous version), markj (previous version)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27100
* TCP segments without timestamps should be dropped when support for
the timestamp option has been negotiated.
* TCP segments with timestamps should be processed normally if support
for the timestamp option has not been negotiated.
This patch enforces the above.
PR: 250499
Reviewed by: gnn, rrs
MFC after: 1 week
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D27148
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
from a Linux binary. Should come handy for AppImages.
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26959
The MAC address can be set with the optional mac-addr property in the VF
section of the iovctl.conf(5) used to instantiate the VFs.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Query the firmware for the MAC address set by the PF for the VF and use
it instead of the firmware generated MAC if it's available.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The HPT is always stored in big-endian, as it is accessed directly by the
hardware as well as the kernel. As such, it is necessary to convert values
to and from native endian when running on LE.
Some unconverted accesses snuck in accidentally with r367417.
Apply the appropriate conversions to fix boot hanging on powerpc64le.
Sponsored by: Tag1 Consulting, Inc.
Add the missing static keyword present in the declaration.
Reviewed by: melifaro
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27024
Currently there is no locking done to protect this structure. It is
likely okay due to the low-volume nature of IGMP, but allows for
the possibility of underflow. This appears to be one of the only
holdouts of the conversion to counter(9) which was done for most
protocol stat structures around 2013.
This also updates the visibility of this stats structure so that it can
be consumed from elsewhere in the kernel, consistent with the vast
majority of VNET_PCPUSTAT structures.
Reviewed by: kp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27023
Under specific conditions, a window update can be sent with
outdated SACK information. Some clients react to this by
subsequently delaying loss recovery, making TCP perform very
poorly.
Reported by: chengc_netapp.com
Reviewed by: rrs, jtl
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D24237
The goal of the fib support is to provide multiple independent
routing tables, isolated from each other.
net.add_addr_allfibs default tries to shift gears in the opposite
direction, unconditionally inserting all addresses to all of the fibs.
There are use cases when this is necessary, however this is not a
default expected behaviour, especially compared to other implementations.
Provide WARNING message for the setups with multiple fibs to notify
potential users of the feature.
Differential Revision: https://reviews.freebsd.org/D26076
The ZIL will be opened on the first write, not earlier.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11152
PR: 250934
- map those IPv4 / IPv6 socket options which exist in FreeBSD
+ most of them visually verified to have the same type/layout of arguments
+ not tested with linux programs to behave as intended
- be more human readable for known options which are not handled
- be more verbose for unhandled socket message flags we know about
- print the jail ID in linux_msg if run in a jail
- add possibility to print debug message about known missing parts only once
- add multiple levels of sysctl linux.debug:
1: print debug messages, tell about unimplemented stuff (only once)
2: like 1, but also print messages about implemented but not tested
stuff (only once)
3+: like 2, but no rate limiting of messages
- increase default linux debug level from 1 to 3
We are a lot more verbose in as we need to be (e.g. some of the IP socket
options which are the same, and share the same memory layout, and are
believed to work). The reason is that we have no good testsuite to test those
linux-bits. The LTP or other test suites like the python one, are not fully
up to the task we need. As such the excessive messages about emulated but not
tested socket options.
IMO any MFC (possible, but most probably not by me) should set the default
debug level to 1.
Discussed with: trasz
imgact_binmisc matches magic/mask from imgp->image_header, which is only a
single page in size mapped from the first page of an image. One can specify
an interpreter that matches on, e.g., --offset 4096 --size 256 to read up to
256 bytes past the mapped first page.
The limitation is that we cannot specify a magic string that exceeds a
single page, and we can't allow offset + size to exceed a single page
either. A static assert has been added in case someone finds it useful to
try and expand the size, but it does seem a little unlikely.
While this looks kind of exploitable at a sideways squinty-glance, there are
a couple of mitigating factors:
1.) imgact_binmisc is not enabled by default,
2.) entries may only be added by the superuser,
3.) trying to exploit this information to read what's mapped past the end
would be worse than a root canal or some other relatably painful
experience, and
4.) there's no way one could pull this off without it being completely
obvious.
The first page is mapped out of an sf_buf, the implementation of which (or
lack thereof) depends on your platform.
MFC after: 1 week
access the socket send or receive buffer. This is not possible for
listening sockets since r319722.
Because send()/recv() calls fail on listening sockets, fail also ioctl()
indicating EINVAL.
PR: 250366
Reported by: Yong-Hao Zou
Reviewed by: glebius, rscheff
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D26897
The offset we need to account for in the interpreter string comes in two
variants:
1. Fixed - macros other than #a that will not vary from invocation to
invocation
2. Variable - #a, which is substitued with the argv0 that we're replacing
Note that we don't have a mechanism to modify an existing entry. By
recording both of these offset requirements when the interpreter is added,
we can avoid some unnecessary calculations in the exec path.
Most importantly, we can know up-front whether we need to grab
calculate/grab the the filename for this interpreter. We also get to avoid
walking the string a first time looking for macros. For most invocations,
it's a swift exit as they won't have any, but there's no point entering a
loop and searching for the macro indicator if we already know there will not
be one.
While we're here, go ahead and only calculate the argv0 name length once per
invocation. While it's unlikely that we'll have more than one #a, there's no
reason to recalculate it every time we encounter an #a when it will not
change.
I have not bothered trying to benchmark this at all, because it's arguably a
minor and straightforward/obvious improvement.
MFC after: 1 week
This adds a dedicated counter updated with atomics when INVARIANTS
is used. As a side effect one can reliably determine the lock is held
for reading by at least one thread, but it's still not possible to
find out whether curthread has the lock in said mode.
This should be good enough in practice.
Problem spotted by avg.
This doesn't change anything at the moment since the out-of-order elements
were a pair of uint32_t, but future additions may have caused unnecessary
padding by following the existing precedent.
MFC after: 1 week
When using the ALT+CTRL+ESC sequence to break into kdb, the keyboard is
completely borked when you return. watch(8) shows that it's working, but
it's inserting escape sequences.
Further investigation revealed that VT_ALT_TO_ESC_HACK is the default and
directly conflicts with this sequence, so upon return from the debugger
ALKED is set.
If they triggered the break to debugger, it's safe to assume they didn't
mean to use VT_ALT_TO_ESC_HACK, so just unset it to reduce the surprise when
the keyboard seems non-functional upon return.
Reviewed by: tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27109
If we hadn't been traced in the first place when syscallenter()
started executing, we can ignore TDB_USERWR. TDB_USERWR can get set,
sure, but if it does, it's because the debugger raced with the syscall,
and it cannot depend on winning that race.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26585
