Commit Graph

182 Commits

Author SHA1 Message Date
Bruce Evans
47acf5563c Updated library order and comments about it. This fixes libm not
being built before libf2c and libmd not being built before libatm.
1998-10-13 16:48:43 +00:00
Jordan K. Hubbard
e886e3bd22 Add libdisk back to alpha build. 1998-10-01 14:49:57 +00:00
Justin T. Gibbs
c3deaba902 libscsi is obsoleted by CAM. 1998-09-17 03:56:23 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
9bb268091e Hook up libcam and libdevstat. 1998-09-15 10:22:54 +00:00
Bruce Evans
54020d8a7b Fixed SUBDIR order (libm is no longer a prerequisite for libtcl). 1998-09-07 13:59:15 +00:00
Satoshi Asami
ff5fcc93d4 Remove tcl from /usr/src, according to prior agreement. BTW, tcl-8.0 *is*
a port so there is nothing to be done on that side now.

Approved by:	jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700

>decision is, I'll respect it.

   Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
   Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
   As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
   Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.

-DG

David Greenman
Core-team/Principal Architect, The FreeBSD Project
1998-09-05 12:25:55 +00:00
Bruce Evans
0f09aefa00 csu must be built before all shared libaries for ELF, since ELF shared
libraries are linked to at least crti.o.  Always build it first.
1998-09-02 15:02:18 +00:00
John Birrell
8deb7ff0b0 BINFORMAT -> OBJFORMAT ready for E-day. 1998-08-30 01:57:55 +00:00
Gary Palmer
d78dcde236 Building `compat' on alpha is meaningless (they are i386 libraries) 1998-08-22 14:31:39 +00:00
Mike Smith
a8d0d4d632 Add libstand. 1998-08-20 08:24:07 +00:00
Dag-Erling Smørgrav
163074e1ca Cross my fingers and enable libfetch. 1998-08-17 09:32:07 +00:00
John Birrell
18381dac5f Build libkvm on alpha too. 1998-08-15 12:36:42 +00:00
Peter Wemm
c932f88612 If building and installing libdescrypt, do it first so that the symlinks
point to it rather than libscrypt.

This was how it was done prior to libscrypt being added in.  This should
stop more people getting burnt with the /usr/lib -> /usr/lib/aout
transition, and the same when the ELF libs come online.
1998-05-27 18:42:36 +00:00
John Birrell
d788c4fb65 libtcl now builds (with lots of pointer to int cast warnings) on alpha. 1998-05-13 22:54:03 +00:00
Peter Wemm
8e3465ed9f Add libbind 1998-05-03 05:06:13 +00:00
Mark Murray
efa3929e79 Build both libscrypt and libdescrypt. There is no point in letting
libscrypt stagnate, even if it is superceded by libdescrypt. It is
a tiny library anyway, and building it is inexpensive.
1998-03-21 08:18:57 +00:00
Bruce Evans
c9811e98d6 Build the libraries in a correct order. Reorganized the ifdefs so
that the order is easy to see.
1998-03-19 16:56:58 +00:00
John Birrell
5f160d1454 Can build libc and libc_r on alpha now.
Changed MACHINE to MACHINE_ARCH with the expectation that pc98 will
use elf the same as i386.

Nuked tahoe and vax 'cause the files they reference aren't in the
tree. If you want vax goto NetBSD. If you want tahoe... tough.
1998-03-08 23:24:05 +00:00
John Polstra
f0a8e032c6 Enable csu/i386-elf under the appropriate conditions. 1998-03-07 20:30:18 +00:00
John Birrell
fdbac8827e We can now build libm on Alpha. There is very little MD alpha code. 1998-01-10 22:51:51 +00:00
John Birrell
6a7a98c954 Bruce says that ${.CURDIR}/csu/${MACHINE} will prevent finding a
stale obj directory and we wouldn't want to do that! I trust he knows
what he's talking about. 8-)

Also avoid building libm at all until the NetBSD asm code is imported.
I wrongly commented this out last time. Oops.
1998-01-10 09:09:24 +00:00
John Birrell
b09f41a4b9 Don't build libc, libc_r or libm on Alpha yet. We'll do the other
libraries first and use NetBSD's libc/libm for now.
1998-01-09 19:46:30 +00:00
John Birrell
8d6fec39d2 Build lib/csu/${MACHINE} only if it exists so that when porting FreeBSD
to another architecture (in this case the Alpha) we can continue to use
the host csu objects (from NetBSD). This should be a non-function change
to FreeBSD/i386.
1998-01-09 05:37:41 +00:00
Wolfgang Helbig
974c421176 Add libcalendar. 1997-12-04 10:48:14 +00:00
Mark Murray
0e8089efef Changes for KTH KerberosIV 1997-09-28 09:08:48 +00:00
Søren Schmidt
805af8409d Activate libvgl 1997-08-22 13:20:03 +00:00
Brian Somers
3175d10a96 Hook in alias library. 1997-05-23 04:46:49 +00:00
John Birrell
cb6e7ccbea Change default build to include libc_r, but allow disadvantaged souls
to turn off the build.
1997-05-03 02:51:59 +00:00
Peter Wemm
ff2edf0cf8 Put on my flame proof suit and make libtcl build conditional on
the src/contrib/tcl directory existing, and also have an /etc/make.conf
override (NOTCL) to stop building libtcl.  This is in similar other
things from src/Makefile, eg: NOGAMES, NOLKM, etc.

This is so that people can put in a refuse entry in their cvsup files and
not fetch the tcl code, and have it not built automatically.  I'll do
something similar for perl.
1997-04-12 07:06:08 +00:00
Paul Traina
00a825f736 Activate libopie 1997-02-07 03:58:36 +00:00
Andrey A. Chernov
c4be7158c8 Build ebones/libtelnet only if MAKE_EBONES defined 1997-01-08 11:34:32 +00:00
Peter Wemm
8ff1029282 In the spirit of Christmas, I give ye a gift!
- A major 11th hour, last second,  untested commit!

Build some infrastructure to clean up the compat lib distributions, and
also allow them to be installed from the source tree rather than having
to to and get the tarballs from freefall or a CD.  Some tweaks to
/etc/make.conf are in the pipeline to enable it.

This came about because it became apparent that we'd have to change the
compat21.tgz tarball to fix the NIS problem with 2.1.x binaries.  Since
it's tar..gz.uu, doing this would have caused a huge repository change
and we may as well try and fix it once and for all.  Now, adding/removing
libraries should have MUCH less repository impact.

Peril sensative sunglasses: on!
Flame proof suit: on!
Concept reviewed by a stream of ascii representing the opinion of: jkh
Changes casually reviewed by: jkh (but not actually tested)
1996-12-23 05:07:37 +00:00
Poul-Henning Kamp
d4c468e3fe Don't look for encumbered objects, but encumbered sources. 1996-12-11 10:02:29 +00:00
Mark Murray
58dee85f34 Compile libtelnet from eBones, not secure.
2.2 candidate.
1996-11-03 16:59:04 +00:00
Peter Wemm
92f8a73207 libfakegnumalloc -> libgnumalloc 1996-09-27 07:12:11 +00:00
Peter Wemm
583c43dfe0 add back stub libresolv 1996-09-03 13:24:59 +00:00
Peter Wemm
0f10dec0a6 Knock libresolv out of the SUBDIR for the moment while it doesn't build. 1996-08-29 20:17:12 +00:00
Julian Elischer
0f7d684755 Submitted by: John Birrell <cimaxp1!jb@werple.net.au>
Here are the diffs for libc_r to get it one step closer to P1003.1c
These make most of the thread/mutex/condvar structures opaque to the
user. There are three functions which have been renamed with _np
suffixes because they are extensions to P1003.1c (I did them for JAVA,
which needs to suspend/resume threads and also start threads suspended).

I've created a new header (pthread_np.h) for the non-POSIX stuff.

The egrep tags stuff in /usr/src/lib/libc_r/Makefile that I uncommented
doesn't work. I think its best to delete it. I don't think libc_r needs
tags anyway, 'cause most of the source is in libc which does have tags.

also:

Here's the first batch of man pages for the thread functions.
The diff to /usr/src/lib/libc_r/Makefile removes some stuff that was
inherited from /usr/src/lib/libc/Makefile that should only be done with
libc.

also:

I should have sent this diff with the pthread(3) man page.
It allows people to type

make -DWANT_LIBC_R world

to get libc_r built with the rest of the world. I put this in the
pthread(3) man page.  The default is still not to build libc_r.


also:
The diff attached adds a pthread(3) man page to /usr/src/share/man/man3.
The idea is that without libc_r installed, this man page will give people
enough info to know that they have to build libc_r.
1996-08-20 08:22:01 +00:00
Peter Wemm
d3065f15eb insert libipx and libdisk into correct order, add libz 1996-08-18 18:57:00 +00:00
Peter Wemm
450c478593 Add back missing backslash in SUBDIR list, it got lost when libtcl was
added.  (also align the text block, it looked odd with variable indent)
1996-06-28 12:07:01 +00:00
Poul-Henning Kamp
3510f44474 Add libtcl to makefile 1996-06-28 05:35:44 +00:00
Jordan K. Hubbard
cd9a2f5c28 Bring in my changes for removing the pestilent obj links (unless you
really want them) from /usr/src.  This is the final version of the
patches, incorporating the feedback I've received from -current.
1996-06-24 04:26:21 +00:00
Jordan K. Hubbard
eeb1baccd6 Remove libforms - it's unused. 1996-06-19 21:18:24 +00:00
Poul-Henning Kamp
9d762dcebc Add tcl. 1996-06-18 16:53:59 +00:00
Jordan K. Hubbard
9dc1ac56fc Bring in libftpio. 1996-06-17 20:18:11 +00:00
Joerg Wunsch
85e04d81f6 Add libdisk. 1996-03-18 18:59:08 +00:00
Joerg Wunsch
eb5bc2e765 Include both, the regular and the `secure' libtelnet, when building
a release.
1996-02-13 09:17:42 +00:00
Poul-Henning Kamp
cbbe7584d8 Add libfakegnumalloc. 1996-02-11 18:13:35 +00:00
Joerg Wunsch
7c2f56cca5 Build libscrypt in addition to libdescrypt if RELEASEDIR is set.
Releases do need both libraries (they go into different distributions).
1996-01-24 21:32:46 +00:00
Mark Murray
3fcee20fa4 Removed reference to missing libmp in a comment. We have GNU MP now. 1995-11-12 19:32:24 +00:00
Julian Elischer
cc6a66f20e Reviewed by: julian and jhay@mikom.csir.co.za
Submitted by:	Mike Mitchell, supervisor@alb.asctmd.com

This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..

Mikes been using it for a year or so
but on 2.0

more changes and stuff will be merged in from other developers now that this is in.

Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
Andrey A. Chernov
0975d201e0 libxpg4 added 1995-10-23 01:50:11 +00:00
Andrey A. Chernov
e6af2dc882 Build secure libcrypt if available and allowed 1995-09-29 19:56:05 +00:00
Andrey A. Chernov
153193f392 Build secure libtelnet if available and allowed 1995-09-29 19:45:25 +00:00
Mark Murray
f547de18d3 Only build libtelnet if the secure libtelnet is not going to be built.
Reviewed by:	rgrimes
1995-08-06 11:14:09 +00:00
Jordan K. Hubbard
083cb36a3f Remove libftp from Makefile 1995-08-04 07:27:24 +00:00
Jordan K. Hubbard
25f15401b9 Add libftp to list of targets. 1995-04-25 15:08:52 +00:00
Poul-Henning Kamp
72b799a9a3 msun becomes the default -lm the right way now. 1995-03-21 02:52:05 +00:00
Bruce Evans
9ee337da19 Add libpcap. I don't know what it is doing in the tree, but it has
settled for too long.  Compiling it gives 142 lines of compiler
warnings.  Perhaps the dirt will be fixed if it is visible.
1995-02-08 20:46:53 +00:00
Peter Dufault
10ee7eaff2 added libscsi 1995-01-24 12:10:42 +00:00
Garrett Wollman
a6066145ff *** empty log message *** 1995-01-21 23:01:33 +00:00
Garrett Wollman
8a256cf77b Add libss. 1995-01-19 22:32:05 +00:00
Paul Richards
0d18307afc The start of a forms editor library. Currently implements text and
input fields. It reads a template file passed to init_forms(char *)
and creates a curses based form editor. See the examples directory
for a basic demo.
1994-11-13 06:45:44 +00:00
L Jonas Olsson
f2b209421e Added libf2c, the library for f2c. 1994-10-27 11:07:34 +00:00
Andrey A. Chernov
6dabd3aad2 Restore leading tabs 1994-10-09 02:09:14 +00:00
Andrey A. Chernov
b25aa8a037 libncurses added 1994-10-07 09:28:33 +00:00
Andrey A. Chernov
626cdf0fd1 libmytinfo added.
PS: don't forget 'make beforeinstall' if you want to play with it
1994-10-06 23:41:24 +00:00
Rodney W. Grimes
601284ae58 libterm is now libtermcap 1994-09-11 22:28:45 +00:00
Paul Richards
f06e7c2ed8 Moved the csu directory to be first on the SUBDIR list. This is
because libmd builds a test program before installation and if
you've used CLOBBER there's no crt.0 to link with. This ensures
that in a make world the csu objects will get installed before
reaching the libmd directory.

Reviewed by:
Submitted by:
1994-08-25 13:39:18 +00:00
Geoff Rehmet
4714bb15be LDADD= -lcrypt
Submitted by:	Geoff
1994-08-20 21:19:46 +00:00
Guido van Rooij
21f0f67278 Add entry for libskey
Reviewed by:
Submitted by:	guido
1994-08-19 18:16:40 +00:00
Jordan K. Hubbard
b605997937 Make libmsun a switchable option, as before.
Submitted by:	jkh
1994-08-19 10:24:56 +00:00
Garrett Wollman
ae6bbc9a7b Add back librpcsvc. It builds fine on both my machine and thud, I don't
know what Jordan's problem was.
1994-08-09 16:29:20 +00:00
Jordan K. Hubbard
9b9185af8d Comment out librpcv. Not there.
Submitted by:	jkh
1994-08-09 00:37:16 +00:00
Garrett Wollman
0d096f62f7 Make librpcsvc. 1994-08-07 23:27:27 +00:00
Garrett Wollman
12199686e6 Don't try to build librpc in a separate directory. 1994-08-07 18:52:47 +00:00
Poul-Henning Kamp
99fa41fb52 Reviewed by: phk
Added libmd.
1994-07-24 03:30:47 +00:00
Rodney W. Grimes
1ece12e5f0 Enable csu/${MACHINE} now that I have copied in our crt* files. 1994-05-28 09:24:46 +00:00
Rodney W. Grimes
f227112c93 Make the comments about what is missing and not done consistent with
my other Makefile comments so they can easily be found with grep.
1994-05-28 04:32:21 +00:00
Rodney W. Grimes
1cb16b68b3 Comment out missing libmp and libplot, disable csu until it is ported. 1994-05-27 11:00:20 +00:00
Rodney W. Grimes
58f0484fa2 BSD 4.4 Lite Lib Sources 1994-05-27 05:00:24 +00:00