sfxge: add new MCDI sensors to common code
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: remove unnecessary pulling out of soft bits from RX events
These bits are changed on Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: remove obsolete common code PKTFILTER module
The pktfilter module has been obsolete for some time, as
it was replaced by newer features in filter module. With
the removal of the storport driver, this module has no
users and can be removed.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt MCDI methods to ef10 and use for Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt nvram methods and use for Medford
Some new partitions have been added, but they shouldn't need to be
handled any differently.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename Huntington VPD methods to ef10 and use for Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt RX methods to ef10 and use for Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt TX methods to ef10 and use for Medford
Rename all except hunt_tx_qdesc_tso_create(), which creates a
fw-assisted TSO v1 descriptor which isn't supported on Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt ev methods to ef10 and use for Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: rename hunt interrupt methods to ef10 and use on Medford
All of these apply to both Huntington and Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: update SRAM methods to be no-ops on Medford as well
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: use NIC config in place of some Huntington specific PIO constants
This should allow these functions to work for Medford as well.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: change hunt specific fields of efx_nic_t to ef10
All these fields will be used in shared ef10 code, so put them in an
ef10 member of a per-architecture union, rather that in the per-chip
union.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: add medford_impl.h, medford_nic.c, ef10_impl.h
Creating some files together to do the build system changes in one go.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: add Medford sensor support
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: add Medford PCI IDs to common code
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: add sanity checking for EFX_OPT_MEDFORD build option to efx_check.h
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: add Medford build option disabled by default
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: unify MCDI response polling
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
sfxge: simplify MCDI methods
It is a part of MCDI rework to share more code among NIC families.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: consolidate privilege check functions
To reduce code duplication in common code, consolidate similar privilege
check functions.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: simplify privilege checks with macro
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: use MAC spoofing TX and MAC change privileges
Update of common code to provide a query on the MAC_SPOOFING_TX and
CHANGE_MAC privileges instead of the deprecated MAC_SPOOFING privilege.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: [6/6] support for MCDI proxy authorization in common code
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: fix pointer parameter/value signedness mismatch warnings
TLV routines use 'uint8_t *', NVRAM code uses caddr_t. Just cast to
required type to fix the warning.
Required to build with -Werror=pointer-signg.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: fix name conflict with crc32_table from sys/crc32.h
The header is not present on FreeBSD, but exists on OmniOS where sfxge
common code is used as well.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: switch to TxQ creation specific flags
It is better do not mix TxQ creation and receive event flags since only
checksum flags are applicable to TxQ.
Also it will allow to add a new TxQ creation specific flags.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: [Sorrento] support writing of MUM firmware
When writing the MUM firmware the chunk size must be equal to the erase
size.
Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: support PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED flag
Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: erase nvram partitions in chunks equal to their erase size
The erase size is reported by the nvram info command.
Submitted by: Paul Fox <pfox at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
sfxge: cleanup: remove set but not used trailer variable
Required to build with -Werror=unused-but-set-variable.
Sponsored by: Solarflare Communications, Inc.
sfxge: cleanup: remove set but not used variable with parse error indication
Required to build with -Werror=unused-but-set-variable.
Keep it under #if 0 as a reminder for parse error processing.
Sponsored by: Solarflare Communications, Inc.
sfxge: cleanup: remove set but not used saved_spec variable
Required to build with -Werror=unused-but-set-variable.
Sponsored by: Solarflare Communications, Inc.
sfxge: cleanup: remove SFL9122 "Huntington" PCI IDs
The SFL9122 "Huntington" controller was never built.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: support for MCDI logging implemented
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
sfxge: [EF10] support RxQ scattering control
If, for example, a VF is configured to use a 1500 byte MTU, but the port
it is attached to is set to 9000 bytes, overlength frames can be received
by the VF. As Huntington scatters by default, these overlength packets
would be scattered across several descriptors, with all except the last
having the CONT bit set.
To avoid this, disable scatter when creating RXQs if the firmware
supports doing so, which all recent versions do. Then we only get
a single descriptor from an overlength frame. This will have the CONT
bit set to indicate it was truncated, so we can discard it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
sfxge: add additional WRITESIZE value for NVRAM_INFO command
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
