If a disk's SIM doesn't support polling, then it can't be used to
store crashdumps. Leave d_dump NULL in that case so that dumpon(8)
fails gracefully rather than having dumps fail at crash time.
Reviewed by: scottl, mav, imp
MFC after: 2 weeks
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D28454
Some CAM sim drivers do not support polling (notably iscsi(4)).
Rather than using a no-op poll routine that always times out requests,
permit a SIM to set a NULL poll callback. cam_periph_runccb() will
fail polled requests non-pollable sims immediately as if they had
timed out.
Reviewed by: scottl, mav (earlier version)
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D28453
RFC 7143 (11.7.4):
The Target Transfer Tag values are not specified by this protocol,
except that the value 0xffffffff is reserved and means that the
Target Transfer Tag is not supplied.
MFC after: 1 month
There are no non-MPSAFE SIM drivers left in the tree, verified with
coccinelle.
Reviewed by: scottl, imp
Differential Revision: https://reviews.freebsd.org/D27853
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
Before this CTL always allocated MAXPHYS-sized buffers, even for 4KB I/O,
that is even more overkill for MAXPHYS of 1MB. This change limits maximum
allocation to 512KB if MAXPHYS is bigger, plus if one is above 128KB, adds
new 128KB UMA zone for smaller I/Os. The patch factors out alloc/free,
so later we could make it use more zones or malloc() if we'd like.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
There are two ways to propagate the error in MMCCAM:
* Using cmd.error which is set by the peripheral driver;
* Using CCB status which is... also set by the driver.
The problem is that those two error conditions don't necessarily match.
This leads to the confusion when handling the MMC reply. So enforce the consistency
by panicking if request is marked as completed successfully but MMC-level error
is present (this hints to the programming error).
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D26925
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
SAM-3 specification introduced concept of Task Priority, that was renamed
to Command Priority in SAM-4, and supported by all modern SCSI transports.
It provides 15 levels of relative priorities: 1 - highest, 15 - lowest and
0 - default. SAT specification for SATA devices translates priorities 1-3
into NCQ high priority.
This change adds new "priority" field into empty spots of struct ccb_scsiio
and struct ccb_accept_tio of CAM and struct ctl_scsiio of CTL. Respective
support is added into iscsi(4), isp(4), mpr(4), mps(4) and ocs_fc(4) drivers
for both initiator and where applicable target roles. Minimal support was
added to CTL to receive the priority value from different frontends, pass it
between HA controllers and report in few places.
This patch does not add consumers of this functionality, so nothing should
really change yet, since the field is still set to 0 (default) on initiator
and not actively used on target. Those are to be implemented separately.
I've confirmed priority working on WD Red SATA disks connected via mpr(4)
and properly transferred to CTL target via iscsi(4), isp(4) and ocs_fc(4).
While there, added missing tag_action support to ocs_fc(4) initiator role.
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
Instead, add arguments to vmapbuf. Since this argument is
always a pointer use a type of void * and cast to vm_offset_t in
vmapbuf. (In CheriBSD we've altered vm_fault_quick_hold_pages to
take a pointer and check its bounds.)
In no other situtation does b_data contain a user pointer and vmapbuf
replaces b_data with the actual mapping.
Suggested by: jhb
Reviewed by: imp, jhb
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26784
Sometimes, this drive will be present in the system such that the the
firmware identification string doesn't start with ATA, such as when
it's behind a SATA-to-SAS interposer. Add another quirk for that.
Submitted by: github user mr44er
Github PR: 423
I had failed to notice that sgsendccb() was using cam_periph_mapmem()
and thus was not passing down user pointers directly to drivers. In
practice this broke requests submitted from userland.
PR: 249395
Reported by: Trenton Schulz <trueos@norwegianrockcat.com>
Reviewed by: scottl
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26550
This is a fix to r334065.
Without this change I once got stuck I/O with endless partition switching:
(sdda0:aw_mmc_sim2:0:0:0): sddastart
(sdda0:aw_mmc_sim2:0:0:0): Partition 0 -> -525703168
(sdda0:aw_mmc_sim2:0:0:0): xpt_action: func 0x91d XPT_MMC_IO
(sdda0:aw_mmc_sim2:0:0:0): xpt_done: func= 0x91d XPT_MMC_IO status 0x1
(sdda0:aw_mmc_sim2:0:0:0): sddadone
(sdda0:aw_mmc_sim2:0:0:0): Card status: 00000000
(sdda0:aw_mmc_sim2:0:0:0): Current state: 4
(sdda0:aw_mmc_sim2:0:0:0): Compteting partition switch to 0
Note that -525703168 (an int) is 0xe0aa6800 in binary representation.
The partition indexes are actually stored as uint8_t, so that value
was converted / truncated to zero.
MFC after: 1 week
cam_sim_free(), cam_sim_release(), and cam_sim_hold() all assign
a mtx variable during declaration and then if NULL or the mtx is
held may re-asign the variable and/or acquire/release a lock.
Harmonize the code, avoiding double assignments and make it look
the same for all three function (with cam_sim_free() not needing
an extra case).
No functional changes intended.
Reviewed by: imp; no-objections by: mav
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26286
It allows to report GEOM::lunid for nda(4) same as for nvd(4). Since
NVMe now allows multiple LUs (namespaces) with multiple paths unique
LU identification is important. The serial_num field is filled same
as before with the controller serial number, while device_id is based
on namespace GUID and/or EUI64 fields as recommended by "NVM Express:
SCSI Translation Reference" and matching nvd(4) at the end.
MFC after: 1 week
In case we are failing to allocate mmcdata, we are returning with
a softc allocated but not attached to anything and thus leak the
memory.
Reviewed by: scottl
MFC after: 2 weeks
X-MFC: only if we also mfc other mmccam changes?
Differential Revision: https://reviews.freebsd.org/D25987
It allows to report to initiator LU identifying information, preset via
"ident_info" and "text_ident_info" options.
Unfortunately it is impossible to implement SET IDENTIFYING INFORMATION,
since we have no persistent storage it requires, so the information is
read-only for initiator and has to be set out-of-band.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
* Downgrade some CAM debug messages from _INFO to _DEBUG level;
* Add KASSERT for the case when we suspect incorrect CAM SIM initialization (using cam_sim_alloc() instead of cam_sim_alloc_dev());
* Use waiting version of xpt_alloc_ccb(), we are not in hurry;
* With the waiting version we cannot get NULL return, so remove the NULL check;
* In some csses, the name of mmcprobe_done has been written as mmc_probedone();
* Send AC_LOST_DEVICE if we, well, lost the device;
* Misc style(9) fixes.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25843
We cannot sleep during cam proto_announce and sbuf sleeps so use
a static length buffer like nvme(4)
Reviewed by: kibab
Differential Revision: https://reviews.freebsd.org/D25949
This is a generic function start a scan request for the given
cam_sim.
Other driver can now just use this function to request a new rescan.
Submitted by: kibab
