sounds like some kind of horrific theme park. "Hey kids, want to go to
User Land?" "No! We'll be good!"
The obvious replacement is "userland", a compound word replete with
term-of-art meaning and just a hint of cautionary tale. The alternate
terms "flugelhorn" and "bullfrog", while also good, are less well-known
and were voted down in committee.
MFC after: 1 week
deadline mode the divide configuration is not used and
lapic_timer_divisor is not set.
Reported by: dhw, mav
Tested by: mav
Sponsored by: The FreeBSD Foundation
LAPIC timer iinterrupt when TSC reaches the value written to the
IA32_TSC_DEADLINE MSR. To arm or reset the timer in deadline mode, a
single non-serializing MSR write is enough. This is an advance from
the one-shot mode of LAPIC, where timer operated with the FSB
frequency and required two (serialized in case of xAPIC) writes to the
APIC registers.
The LVT_TIMER register value is cached to avoid unneeded writes in the
deadline mode. Unused arguments to specify period (which is passed in
struct lapic as la_timer_period) and interrupt enable (which is always
enabled) are removed from lapic_timer_{oneshot,periodic,deadline}
functions. Instead, special lapic_timer_oneshot_nointr() function for
interrupt-less one-shot calibration is added.
Reviewed by: mav (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5738
The graphic mode is noticeably slow on hypervisors, especially
on Hyper-V (1 second to each line).
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: kib, sephe, royger (early loader version)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5739
program without listening to the devd socket for all events. Define
two new pseudo variables $*, the entire event from devctl and $_,
the entire event without the type character, since it might be easier
to use in some circumstances.
only the first one will actually work and all the others just result in
errors (which would get printed but otherwise ignored).
Instead, wait until we make a choice of which interface will be used to
mount the rootfs, and install the default route associated with it (if any).
After doing the md_mount() call to obtain the needed info, remove the
default route again, and transcribe the route info into the nfs_diskless
structure. If the system eventually chooses to mount the nfs rootfs, the
default route will be installed again when the nfs_diskless code
re-initializes the interface.
The theory here is that since we can only have one default route, the one
most likely to be correct for mounting the rootfs is the one that was
delivered along with the rootpath option.
bootp/dhcp server doesn't provide a router option. Doing so prevents
setting defaultrouter=<ip> in rc.conf (it fails because there's already
a bogus default route installed by bootpc_init).
When an admin wants to use this style of proxy arp on an interface, the
proper mechanism is to set the "use-lease-addr-for-default-route" flag
in the dhcp server config. That causes the lease address to be delivered
in the routers option, and the normal handling of the routers option will
then install the self-ip as the default route.
PR: 187094
doesn't check for errors, and all the errors that can happen result in it
calling panic anyway, except for one that's really more of a warning (and
is going to disappear on an upcoming commit anyway).
server (and not when it came from a fallback method such as the ROOTDEVNAME
option). This makes the code in bootpc_init() choose the first interface
that provided a rootpath name. Previously it was choosing the first
interface that got an IP address, which could be on a different and
potentially unreachable subnet than the server providing the rootfs.
If the rootpath name actually does come from a fallback source, then the
code continues to use the first interface in the list that got configured.
Note that this wasn't directly reported in the PR cited below, but was
discovered while working on that PR.
PR: 187094
[libcxx] Enable noexcept for GCC 4.6 and greater
Summary:
This patch allows GCC 4.6 and above to use `noexcept` as opposed to
`throw()`.
Is it an ABI safe change to suddenly switch on `noexcept`? I imagine
it must be because it's disabled in w/ clang in C++03 but not C++11.
Reviewers: danalbert, jroelofs, mclow.lists
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D15516
This should fix errors from gcc 4.6 and higher when compiling llvm-cov
and/or other llvm tools.
Reported by: bdrewery
In the case the width is less than 0, we are returning an uninitialized
value. For practical purposes the return value is ignored but initialize
it to avoid trouble.
CID: 1341619
Check if pf.ko is loaded (i.e. /dev/pf exists) before trying to use it. This
means that '/etc/rc.d/pf status' will no longer return 'pfctl: /dev/pf: No such
file or directory' but 'pf.ko is not loaded'.
PR: 205671
Submitted by: Johannes Jost Meixner <xmj@FreeBSD.org>
into per-mount taskqueue with the private taskqueue processing thread.
This allows to drain the taskqueue on unmount, to ensure that all
TRIMs are finished before mount structures are freed.
But just draining the taskqueue where TRIM biodone geom-up completions
are processed is not enough, since ffs_blkfree(), called by the task,
might result in more writes. Count inflight delayed blkfree's and
pause() unmount until the counter drains as well.
Reported by: Nick Evans <nevans@talkpoint.com>
Tested by: Nick Evans <nevans@talkpoint.com>, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
with libc++, which is also C++11. Also change one _Static_assert (which
is really C11) back into static_assert, like upstream.
This should help when compiling libcxxrt with newer versions of gcc,
which refuse to recognize any form of static assertions, if not
compiling for C++11 or higher.
While here, add -nostdinc++ to CFLAGS, to prevent picking up any C++
headers outside the source tree.
m_unshare passes on the source mbuf's flags as-is to m_getcl and this
results in a leak if the flags include M_NOFREE. The fix is to clear
the bits not listed in M_COPYALL before calling m_getcl. M_RDONLY
should probably be filtered out too but that's outside the scope of this
fix.
Add assertions in the zone_mbuf and zone_pack ctors to catch similar
bugs.
Update netmap_get_mbuf to not pass M_NOFREE to m_getcl. It's not clear
what the original code was trying to do but it's likely incorrect.
Updated code is no different functionally but it avoids the newly added
assertions.
Reviewed by: gnn@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5698
[X86] Emit a proper ADJCALLSTACKDOWN in EmitLoweredTLSAddr
We forgot to add the second machine operand to our ADJCALLSTACKDOWN,
resulting in crashes in PEI.
This fixes PR27071.
This should fix an assertion failure during buildworld, when using -Os,
and targeting either i386 directly, or building the 32-bit libraries on
amd64.
Reported by: Eric Camachat <eric.camachat@gmail.com>
- in atags
- in DT blob (by using 'fdt chosen' U-Boot command)
The command line must start with guard's string 'FreeBSD:' and can contain
list of comma separated kenv strings. Also, boot modifier strings from
boot.h are recognised and parsed into boothowto.
The command line must be passed from U-Boot by setting of bootargs variable:
'setenv bootargs FreeBSD:boot_single=1,vfs.root.mountfrom=ufs:/dev/ada0s1a'
followed by 'fdt chosen' (only for DT based boot)
- Don't convert atags address passed from U-Boot. It's real physical
address (and we have 1:1 mapping).
- Size of tags is encoded in words, not in bytes
This allow us to boot FreeBSD kernel (using uImage encapsulation) directly
from U-boot using 'bootm' command or by Android fastboot loader.
For now, kernel uImage must be marked as Linux, but we can add support for
FreeBSD into U-Boot later.
