One or more ioctl command values can be passed as arguments on the command
line. For each value, the command is broken down into it's components
(direction, group, number, and length). In addition, if a command has a
known name it is output via sysdecode_ioctlname().
Reviewed by: kib, emaste, avg
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6851
This will print a set of variables from make on error using
MAKE_PRINT_VAR_ON_ERROR. It is already enabled for the DIRDEPS_BUILD.
It may make sense to enable this in the non-meta mode as well once
people are more used to its more verbose error output.
This makes it much simpler to see which .meta file is used when a
command files so that it may be inspected for the build command.
Suggested by: sjg
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
In order to allow using utimensat() in install(1), add futimens() and
utimensat() to -legacy.
The files futimens.c and utimensat.c are modified copies of the files under
lib/libc/sys/ since the libc versions use symbols that do not exist in the
libc on the build system (sys_futimens and sys_utimensat) . I expect the
next non-sweeping change to both sets of files to be to delete them, anyway.
This will allow reverting r299942 (which is a revert of r299850) enabling
nanosecond timestamps in install(1).
Reviewed by: bdrewery
makeman doesn't handle this since it would need to enable all
non-default options when checking enabling 1 option, which
then convolutes what is really affecting each other.
Fix typo made when adding the blacklistd.conf file to OptionalObsoleteFiles.inc
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6715
Install the blacklistd.conf man page, missed in the original commit.
Submitted by: Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by: rpaulo
Approved by: rpaulo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6702
For Russian:
- Convert AM/PM which are badly formatted in CLDR to replace it by the proper
cyrillic
- Add a dependency on Text::Iconv so non unicode get the proper encoding for
AM/PM
- fix the date format having 'r.,' and convert it to 'r.' (also fixed in Bulgarian)
For All:
- Use complete Day of Week instead of the abbreviated one
Reported by: ache
- Document missing options
- Sync options with ioatcontrol(8).
- Make it clear that the first 2 parameters are always required.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
There's no current limit on chain-len with Broadwell DE chips; it isn't
enforced in software, and there doesn't appear to be a hardware limitation
either on the Intel Xeon D-1527 (Broadwell-DE) chip.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
t.verify_test = true is always set when -V is specified, regardless of whether
or not the tool is being run in raw mode
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will help ensure that we're not using random garbage on the stack by
accident with respect to the variable
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will still build the compiler for the target but will not build the
bootstrap cross-compiler in the cross-tools phase. Other toolchain
bootstrapping, such as elftoolchan and binutils, currently still occurs.
This will utilize the default CC (cc, /usr/bin/cc) as an external compiler.
This is planned to be on-by-default eventually.
This will utilize the __FreeBSD_cc_version compiler macro defined in the
source tree and compare it to CC's version. If they match then the
cross-compiler is skipped. If [X]CC is an external compiler (absolute
path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped.
If the expected bootstrap compiler type no longer matches the found CC
compiler type (clang vs gcc), then the logic is skipped. As an extra
safety check the version number is also compared from the compiler to
the tree version.
Clang:
The macro FREEBSD_CC_VERSION is defined in:
lib/clang/include/clang/Basic/Version.inc
For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This
is from the current external toolchain logic. There is currently an
assumption that the host compiler can build the TARGET_ARCH. This
will usually be the case since we don't conditionalize target arch
support in clang, but it will break when introducing new
architectures. This problem is mitigated by incrementing the version
when adding new architectures.
GCC:
The macro FBSD_CC_VER is defined in:
gnu/usr.bin/cc/cc_tools/freebsd-native.h
For GCC there is no simple -target support when TARGET_ARCH !=
MACHINE_ARCH. In this case the opportunistic skip is not done. If we
add proper support for this case in external toolchain logic then it
will be fine to enable.
This relies on the macros being incremented whenever any change occurs
to these compilers that warrant rebuilding files. It also should never
repeat earlier values.
Reviewed by: brooks, bapt, imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6357
`BEFORE: netif` was already in etc/rc.d/atm1, so no additional changes
are needed in that script
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
one linuxulator (32/64bit) and as such may have a space
between both linuxulator locations.
Noticed by: Miltiadis Margaronis <mmargaron@gmail.com>
Tested by: Miltiadis Margaronis <mmargaron@gmail.com>
When building collation database for non unicode encodings use the proper
unicode mapping (this fixes collation not working properly for those encodings)
For locales where new characters are added but only for unicode, stop trying to
map the new characters, directly extract from CLDR the collation files for the
said encoding
Stop trying to generate encoding map from unicode version for GB2312 and encCN
It was not reliable. Instead use the map provide by the CLDR project
Reported by: ache
They were not very useful in their current state. It only ran a fork bomb,
confirmed headers/footers matched, hard-coded the number of expected entries
(rather than ensuring each entry is present when expected), and was missing a
sizeof_long.c file from r251368 which makes its intent for testing 32-bit
binaries unclear.
More extensive tests should be written with ATF now.
which is responsible for filtering and RSS.
Add the ability to use filters that match on PF/VF (aka "VNIC id") while
here. This is mutually exclusive with filtering on outer VLAN tag with
Q-in-Q.
Sponsored by: Chelsio Communications
- Get the list of registers to read during a regdump from the shared
code instead of the OS specific code. This follows a similar move
internally. The shared code includes the list for T6.
- Update cxgbetool to be able to decode T5 VF, T6, and T6 VF register
dumps (and catch up with some updates to T4 and T5 register decode).
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
In case ELF Tool Chain's elfcopy introduces any regressions this knob is
available as a transition aid. It will be removed once we are confident
that any regressions have been fixed.
Each of the ath* commands do their own direct socket/ioctl calls,
which makes it difficult to forklift upgrade things.
So, this is the beginning of abstracting out the stats API calls
in the hope that I can migrate things to use a /dev/athX file for
ioctls and use a more general interface.
Tested:
* QCA9565 NIC, STA mode
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Tools removed from the list are now provided by the ELF Tool Chain
project and are not controlled by the WITHOUT_BINUTILS_BOOTSTRAP knob.
Sponsored by: The FreeBSD Foundation
Although POSIX literally permits failing with [EINVAL] if IPC_CREAT and
IPC_EXCL were both passed, the semaphore set already exists and has fewer
semaphores than nsems, this does not allow an application to retry safely:
if the [EINVAL] is actually because of the semmsl limit, an infinite loop
would result.
PR: 206927
the object directory among all builds where it makes sense. When
building with NANO_CPUTYPE, separate that out to its own object
directory. Put disk files in their own directories.
This should make having multiple variants of the same architecture
saner.
o Make sure we create bsd label for MBR scheme (though we don't
really need it for the efi case, and boot1 can't read it). Add
notes about why we have to do this, at least for BIOS.
o Make the BIOS / UEFI with gpt config work.
o Remove now-moribund packaging stuff
Add support for being able to boot off both UEFI and BIOS firmware,
ala the memstick trick.
Add support for writing to GPT volumes.
Move away from using bsd labels at all for these embedded stuff.
Minor tweaks to README.
spelled ${NANO_SLICE_ROOT}a and ${NANO_SLICE_ALTROOT}a respectively,
and that's the default value. This will allow nanobsd on systems
without a bsd label. That's rarely needed these days, even in an MBR
world. The default will shift to this in the future, but remain an
option.
the second set (increment the original ports by 10)
This avoids issues where the first listening socket might not be torn
down by the time it makes it to the second set of testcases.
The sockets should likely only be setup once, but this keeps in the
spirit of the original testcases, so this will be easier to backport
to ^/stable/9
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
It always fails when trying to send through the sendit(9) private KPI in the
kernel due to a size mismatch between the msghdr and data being sent [*], which
suspiciously seems like it's related to sizeof pointers instead of scalars, or
something of that ilk
MFC after: 1 week
PR: 206543, 206544 [*]
Sponsored by: EMC / Isilon Storage Division
check_scm_creds_sockcred after initial != NULL checks have been done for
debugging purposes
- Use more terse names for bintime (bt), cmesgcred (cmcred),
sockcred (sc), and timeval (tv) [*]
- Add some debug messages to better understand some of the flow of the test
program
MFC after: 1 week
Requested by: bde [*]
Use of the word "terse" (^.^) corrected by: jhb, rpokala [*]
Sponsored by: EMC / Isilon Storage Division
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
This is needed to be able to run check-links.sh against a "sysrooted"
binary while ensuring that the ldd(1) call done on the host uses the
host libc. It is not possible to set LD_LIBRARY_PATH before calling
check-links.sh as then the "sysrooted" libc would be incorrectly used.
A LD_PRELOAD=libc.so is used to ldd(1) as it needs to use the host libc
to run. ldd(1) is a simple wrapper around execve(2) and dlopen(2) with
env LD_TRACE_LOADED_OBJECTS set. Due to the dlopen(2) restriction on
shared library tracing ldd(1) is still required for this lookup.
Sponsored by: EMC / Isilon Storage Division
- Get rid of unused argc/argv variables in main
- Exit on failure with a return code of 1 instead of -1 with err/errx as a
return code of -1 is implementation dependent
- Bump WARNS to 6
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
reconnect.c:
- Convert the K&R prototype of main to an ANSI prototype to mute a
warning from gcc 4.2.1
- Close s_sock2 after finishing off the last test to plug a leak and
mute a warning from gcc 5.0 about a -Wunused-but-set variable
sendfile.c:
- Fix a -Wunused-but-set warning with gcc 5.0 with pagesize in main(..)
MFC after: 5 days
Sponsored by: EMC / Isilon Storage Division
- `SOCK_RAW` is the implied supported type parameter for socket(2) per route(4)
- localsw in `sys/kern/uipc_usrreq.c` doesn't have an entry for `SOCK_RAW`, so
the prototype is invalid (this isn't explicitly documented anywhere I could
find)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will help ensure that scripts/parsers don't get confused when the message
is printed out
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
- Add a conf.sh file for executing common functions with geom_gate
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
- Add/increase sleeps to try and improve synchronization
- Add debug output for when checksums fail
test-1.t:
- Use pkill for killing ggated
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
It is built in libgcc_s.so and libgcc_eh.a to simplify transition.
It is enabled by default on arm64 (where we previously had no other
unwinder) and may be enabled for testing on other platforms by setting
WITH_LLVM_LIBUNWIND in src.conf(5).
Also add compiler-rt's __gcc_personality_v0 implementation for use with
the LLVM unwinder.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4787
(geom_test_cleanup, etc) down so the testcases don't emit noise when
bailing
- Conform to the TAP protocol better when dealing with classes that can't
be loaded and with temporary files that can't be allocated for tracking
md(4) devices.
MFC after: 2 weeks
X-MFC with: r293028, r293029, r293048
Sponsored by: EMC / Isilon Storage Division
- Delete test-2.sh as it was an incomplete testcase, and the contents were
basically a subset of test-1.sh
- Add a conf.sh file for executing common functions with geom_uzip
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
-- Use linear probing to find the first unique md(4) device, unlike the other
code which uses attach_md, as geli(8) allocates the md(4) devices itself
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
- Add a geom_concat specific cleanup function and trap on that function at
exit so things are cleaned up properly
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
only. You need to remount / rw and export TMPDIR=/pkg/tmp. pkg will
then work. It's slow though: 15 minutes to pkg install git on an RPi 2
with a decently fast SD card. Since this is for testing, we set
DEFAULT_ALWAYS_YES and ASSUME_ALWAYS_YES to YES.
- Implement a gmirror_test_cleanup function, which in turn calls
geom_test_cleanup to clean up all md(4) providers allocated in the test
run.
- Remove duplicate logic in test scripts for removing md(4) providers.
- Don't create files in /tmp (outside the kyua sandbox); use the current
directory instead
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
