Commit Graph

55 Commits

Author SHA1 Message Date
markj
f796c58786 Include descriptions of the flags and fields printed when dumping the
IPv6 prefix list.

Reviewed by:	hrs
MFC after:	1 week
2013-05-23 19:50:36 +00:00
glebius
7f832c3059 Retire struct sockaddr_inarp.
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.

New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.

The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.

Reviewed by:	ru, andre, net@
2013-01-31 08:55:21 +00:00
ume
e33acd92c3 Add no_prefer_iface option.
It stops treating the address on the interface as special by source
address selection rule even when the interface is outgoing interface.
This is desired in some situation.

Requested by:	hrs
Reviewed by:	IHANet folks including hrs
MFC after:	1 week
2013-01-09 18:18:08 +00:00
eadler
ba44c5a926 Minor wording improvments to some manual pages
Approved by:	bcr (mentor)
Obtained from:	DragonflyBSD (a5294ca835317c68c919ab43936da4f05ab6e926)
MFC after:	3 days
2012-12-16 23:00:13 +00:00
hrs
377b89c55f - Move definition of V_deembed_scopeid to scope6_var.h.
- Deembed scope id in L3 address in in6_lltable_dump().
- Simplify scope id recovery in rtsock routines.
- Remove embedded scope id handling in ndp(8) and route(8) completely.
2012-12-05 19:45:24 +00:00
hrs
43a17c6d76 Remove "prefer_source" address selection option. FreeBSD has had an
implementation of RFC 3484 for this purpose for a long time and "prefer_source"
was never implemented actually.  ND6_IFF_PREFER_SOURCE macro is left intact.
2012-07-09 06:21:46 +00:00
jeff
2d7d8c05e7 - Merge changes to the base system to support OFED. These include
a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND,
   and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
delphij
3cb53d70b9 Use ether_ntoa instead of home-grown version.
Noticed by:	Boris Kochergin <spawk acm poly edu>
2011-01-08 01:57:23 +00:00
jhb
7909344bdf Ethernet vlan(4) interfaces have valid Ethernet link layer addresses but
use a different interface type (IFT_L2VLAN vs IFT_ETHER).  Treat IFT_L2VLAN
interfaces like IFT_ETHER interfaces when handling link layer addresses.

Reviewed by:	syrinx (bsnmpd)
MFC after:	1 week
2010-08-06 15:09:21 +00:00
ed
073cafdd42 The last big commit: let usr.sbin/ use WARNS=6 by default. 2010-01-02 11:07:44 +00:00
delphij
5973f2f3f4 We use gmt2local code from tcpdump and gnuc.h is no longer being used
there, so remove this dummy header.
2009-12-13 04:08:04 +00:00
hrs
2eb62239d7 Improve flexibility of receiving Router Advertisement and
automatic link-local address configuration:

- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
  default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
  global knob.  The default value of the sysctl is 0.

- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
  sysctl net.inet6.ip6.auto_linklocal to one for its default
  value.  The default value of the sysctl is 1.

- Make ND6_IFF_IFDISABLED more robust.  It can be used to disable
  IPv6 functionality of an interface now.

- Receiving RA is allowed if ip6_forwarding==0 *and*
  ND6_IFF_ACCEPT_RTADV is set on that interface.  The former
  condition will be revisited later to support a "host + router" box
  like IPv6 CPE router.  The current behavior is compatible with
  the older releases of FreeBSD.

- The ifconfig(8) now supports these ND6 flags as well as "nud",
  "prefer_source", and "disabled" in ndp(8).  The ndp(8) now
  supports "auto_linklocal".

Discussed with:	bz and jinmei
Reviewed by:	bz
MFC after:	3 days
2009-09-12 22:08:20 +00:00
bz
fb643392b2 In the NEXTADDR macro use SA_SIZE() rather than directly using
sizeof(), as introduced in r186119, for advancing the current
position into the buffer.
See comment in net/route.h for a description of the difference.
This makes ndp -s work again.

Reviewed by:	qingli
X-MFC after:	now
2009-09-05 16:51:51 +00:00
qingli
1d851edfc0 This checkin addresses a couple of issues:
1. The "route" command allows route insertion through the interface-direct
   option "-iface". During if_attach(), an sockaddr_dl{} entry is created
   for the interface and is part of the interface address list. This
   sockaddr_dl{} entry describes the interface in detail. The "route"
   command selects this entry as the "gateway" object when the "-iface"
   option is present. The "arp" and "ndp" commands also interact with the
   kernel through the routing socket when adding and removing static L2
   entries. The static L2 information is also provided through the
   "gateway" object with an AF_LINK family type, similar to what is
   provided by the "route" command. In order to differentiate between
   these two types of operations, a RTF_LLDATA flag is introduced. This
   flag is set by the "arp" and "ndp" commands when issuing the add and
   delete commands. This flag is also set in each L2 entry returned by the
   kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
   is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
   in the fields for a "rtm" object, which is reinjected into the kernel by
   a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
   is a prefix route, so the RTF_LLDATA flag must be specified when issuing
   the RTM_ADD/DELETE messages.

2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
   specification for retrieving L2 information. Also optimized the
   code logic.

Reviewed by:   julian
2008-12-26 19:45:24 +00:00
qingli
ec826ad5c7 This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
kevlo
fa3791e1a7 Cleanup of userland __P use 2007-11-07 10:53:41 +00:00
kevlo
8c9d3c018a Use sizeof() for calculating the buffer size instead of hard-coded values. 2007-03-06 09:32:41 +00:00
maxim
202535955d o Remove duplicate includes.
Obtained from:	Slava Semushin via NetBSD
2007-01-20 08:24:02 +00:00
yar
b8f7c89828 These IPv6-only tools have no explicit dependency on the INET6 macro.
Tested with:	cmp(1)
2006-07-27 15:31:13 +00:00
ru
8a2652d669 -mdoc sweep. 2005-11-18 10:56:28 +00:00
suz
44730c0a96 supported an ndp command suboption to disable IPv6 in the given interface
Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 week
2005-10-19 16:20:18 +00:00
suz
fe91d8d38d sync with KAME in the following point:
- fixed a bug that "ndp ... proxy" command does not work

Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 weeks
2005-10-19 15:58:23 +00:00
suz
a74e8eb45a sync with KAME in the following points:
- removed compilation warnings
- suppress a redundant error message when a default-router-list is empty

Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 weeks
2005-10-19 15:52:00 +00:00
suz
7cb7aed97b added an ioctl option in kernel so that ndp/rtadvd can change some NDP-related kernel variables based on their configurations (RFC2461 p.43 6.2.1 mandates this for IPv6 routers)
Obtained from: KAME
Reviewd by: ume, gnn
MFC after: 2 weeks
2005-10-19 15:05:42 +00:00
ru
114ea39c76 Fixed the misplaced $FreeBSD$. 2005-02-09 18:07:17 +00:00
ru
3666aefb6a Fixed xref. 2005-01-21 10:48:35 +00:00
ru
6cc4b6c220 Added the EXIT STATUS section where appropriate. 2005-01-17 07:44:44 +00:00
imp
9fbed704d5 Per letter dated July 22, 1999 remove 3rd clause of Berkeley derived software
(with permission of addtional copyright holders where appropriate)
2004-08-07 04:28:56 +00:00
ru
4ef5873a10 Markup and grammar nits. 2004-06-05 20:21:58 +00:00
ru
99db664fda Trim whitespace at EOL. 2004-06-04 19:24:21 +00:00
bms
ec79f6e2f0 Unbreak the build by dealing with an unexpected dependency on tcpdump source
present in ndp(8).

The vendor branch import uses a _U_ macro to apply the GCC 'unused' attribute
to the rcs ids embedded in each source file.  Teach ndp about this.
2004-03-31 20:58:39 +00:00
sumikawa
640645291f Flush stdout when -A option is used.
Obtained from:	KAME
MFC after:	1 week
2004-02-10 22:50:57 +00:00
suz
343f6ce16b fixed improper routing-message flag
Obtained from: KAME
2004-01-08 07:25:04 +00:00
ume
59af8d55c7 - make command line argument parsing POSIX compliant. comment from
deraadt NOTE: -I needs to take an arg (there's no way we can take no
  arg/an arg with a single option)
- sscanf overrun
- no variable name on prototype.
- u_int32_t may not be u_long.
- skipped non-host route when printing neighbor cache entries.
- valid and preferred lifetimes are unsigned.
- wording.

Obtained from:	KAME
2003-11-13 16:02:44 +00:00
ume
0b2009d038 show maxmtu.
Obtained from:	KAME
2003-10-24 18:00:17 +00:00
ume
bdcd869c50 don't print ndp -i result if the interface is not
initialized

Obtained from:	KAME
2003-10-17 16:17:47 +00:00
ume
bb5e84f881 - NI_WITHSCOPEID was deprecated
- use strlcpy() and snprintf()
- use err()
- style

Obtained from:	KAME
2003-10-17 11:46:40 +00:00
ume
324045a3c2 introduced a flag bit "ND6_IFF_ACCEPT_RTADV" in the nd_ifinfo structure to
control whether to accept RAs per-interface basis.
the new stuff ensures the backward compatibility;
- the kernel does not accept RAs on any interfaces by default.
- since the default value of the flag bit is on, the kernel accepts RAs
  on all interfaces when net.inet6.ip6.accept_rtadv is 1.

Obtained from:	KAME
MFC after:	1 week
2003-08-05 14:57:11 +00:00
schweikh
86f7487fb6 Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
jmallett
5dbc18b460 Change 'int pid' to 'pid_t pid'
Submitted by:	Bruce "Allah" Dang <bruce@research.teamxor.org>
2002-07-25 01:48:19 +00:00
charnier
d2168fe021 The .Nm utility 2002-07-14 14:47:15 +00:00
sumikawa
a3649b3839 Do not delete 'goto ours' routes when using -c option.
Obtained from:	KAME
2001-08-09 19:40:35 +00:00
ru
4345758876 mdoc(7) police:
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
2001-08-07 15:48:51 +00:00
obrien
9c97c8f02d Perform a major cleanup of the usr.sbin Makefiles.
These are not perfectly in agreement with each other style-wise, but they
are orders of orders of magnitude more consistent style-wise than before.
2001-07-20 06:20:32 +00:00
ume
832f8d2249 Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
  - The definitions of SADB_* in sys/net/pfkeyv2.h are still different
    from RFC2407/IANA assignment because of binary compatibility
    issue.  It should be fixed under 5-CURRENT.
  - ip6po_m member of struct ip6_pktopts is no longer used.  But, it
    is still there because of binary compatibility issue.  It should
    be removed under 5-CURRENT.

Reviewed by:	itojun
Obtained from:	KAME
MFC after:	3 weeks
2001-06-11 12:39:29 +00:00
ru
afd506414e - Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:42:20 +00:00
ru
f10dc9aca1 Set the default manual section for usr.sbin/ to 8. 2001-03-20 18:17:26 +00:00
ru
66cd8f698e mdoc(7) police: split punctuation characters + misc fixes. 2001-02-01 16:44:04 +00:00
ru
71e2293ad4 mdoc(7) police: use the new features of the Nm macro. 2000-11-20 20:10:44 +00:00
sumikawa
3231981619 - simplify option flags
- do not print header when using -c
- linklocal address are not cleared when using -c

Obtained from:	KAME
2000-10-09 09:28:49 +00:00