- Declare mtabhead as an extern in mounttab.h and define it only in
mounttab.c.
- Remove shared global `verbose' and instead pass it as a parameter.
- Remove the `mtabp' argument to read_mtab(). It served no purpose
whatsoever, although read_mtab() did use it as a temporary local
variable.
- Don't check for impossible conditions when parsing mounttab, and
do detect zero-length fields.
- Correctly test for strtoul() failures - just testing ERANGE is wrong.
- Include a field name in syslog errors, and avoid passing NULL to
a syslog %s field.
- Don't test if arrays are NULL.
- If there are duplicates when writing out mounttab, keep the last
entry instead of the first, as it will have a later timestamp.
- Fix a few formatting issues.
Update rpc.umntall and umount to match the mounttab interface changes.
- Remove unnecessary and unused local variables.
- Include useful information in error and warning messages.
- Fix the logic for expiring mounttab entries.
- Remove calls to getaddrinfo - the results were not used.
- Simplify some string handling by using snprintf.
- Fix usage.
than the long-standing -w option in NetBSD, so change it before anyone in
FreeBSD gets used to it. For now, -w is still accepted, but prints out
some warnings via syslog.
MFC after: 1 week
Problem 1 is that the config entry hangup flag is zeroed only at
CONNECT_ACTIVE_IND in msghdl.c. If any (other) call is disconnected
after EV_MDO and before CONNECT_ACTIVE_IND, the cleanup routine will
disconnect the in-progress dialout as well, if its hangup flag is
nonzero (which it is likely to be) after the previous incarnation of the
cfg entry. Patch-1 fixes this by clearing the hangup flag as soon as a
cfg entry is reserved for the call.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Problem 2 is that doing a local hangup (eg. by writing "H" to the
dialout device) to a call which is already disconnected results in isdnd
moving the cfg entry to an illegal state, from which there is no
recovery. This is tricky because there is no way to synchronize local
hangup with the remote end (ie. the callee can always hang up at an
inconvenient time)! Hence, patch-2 alters fsm.c's EV_DRQ state table
such that the local hangup request is processed or ignored in most
states, even for disconnected calls.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Don't set BINMODE to 500. This is not a setuid program.
Note: the dpt utilities have never been attached to the world and
haven't been compilable for a year or two.
- Lose any stray host bits that a user may have entered when providing
a network number and netmask to the `-a' option for IPv6. This is
corresponding to 1.79 that is for IPv4 only.
MFC after: 1 week
another, unknown option.
Submitted by: Naoki Kobayashi <shibata@geo.titech.ac.jp> and
Harti Brandt <brandt@fokus.gmd.de>, respectively.
Pointy hat to: dd
give an example of how to rotate logs at the beginning of the month.
Although they sound the same, since both of them rotate logs at the
beginning of the day, the former ended up taking place on, e.g., July
31 00:00 instead of the expected July 31 23:59. This is contraty to POLA.
Submitted by: Dan Langille <dan@langille.org>
e->cmd. free_entry() now does the right thing with
partially-initialized structures.
load_entry(): Don't call env_free() on e->envp throughout the routine
before jumping to eof; the free_entry() call at that label will take
care of it. The previous behavior resulted in e->envp being free'd
twice (well, the second time would usually result in a crash, but
that's besides the point); once in load_entry(), and once in
free_entry() after the former called the latter. Also note that the
check added to free_entry() (above) doesn't help, since e->envp wasn't
reset to NULL after env_free().
Submitted by: Mark Peek <mark@whistle.com>
this entire subtree would be in src/contrib, but if that isn't going
to happen at least this has a chance of warning off unsuspecting
committers.
Approved by: wollman
for glue records and forces the glue record to be reloaded from the real NS.
The 5% ttl reduction can cause the glue IN A to timeout before the NS
record in certain situations, such as when the domain owner does not match
up NS records with the NIC. This behavior by domain owners is becoming
more common as primary zone serving iterates through another glue level
(i.e. exodus hosts the master NS's but the customer then redirects the
NS's to the real DNS servers). The result is that named would appear to
work properly for about 40 minutes, and then unexpectedly fail for that
zone. This causes named to behave very inconsistently and a google search
shows that it has obviously frustrated many, many people. So until the bind
guys make named behave consistently (either fail instantly or accomodate the
case), we need to set this option to accomodate the case. The result
will be much more consistent behavior and fewer head-scratching failures.
MFC after: 3 days
receives them from other hosts. This is meant to protect from both
nefarious users (which maybe broke into some remote host that we accept
print jobs from), and broken implementations of lpr on other platforms.
This is done by changing recvjob.c to call the new ctl_renametf()
routine in the new common_source/ctlinfo.[ch] files. This will not
affect jobs coming via lpr on the local machine.
Reviewed by: freebsd-print@bostonradio.org & freebsd-audit
MFC after: 16 days
often by just telling gcc that some internal routine is "__printflike"
(work done by Kris Kennaway <kris@FreeBSD.org>). Also fix the new warnings
which show up once gcc starts checking the "printf-like parameters" passed
to those routines.
MFC after: 1 week
This fixes a problem with using print filters (if=, of=, etc) that showed
up in -current around June 20th. That problem initially reported by
Georg-W Koltermann <gwk@sgi.com>, while most of the investigation that
led to this fix was done by Anton Berezin <tobez@FreeBSD.org>.
Reviewed by: freebsd-print@bostonradio.org
MFC after: 1 week
- Use '\0' for a char instead of NULL.
- Explicitly compare against the global `nullstring' to determine if
a non-NULL uaddr is not malloc'd.
- Remove some unnecessary casting of the argument to free().
- In rpcbproc_callit_com(), move the freeing of m_uaddr to the
cleanup code at the end of the function.
- To avoid confusion and possible alignment problems, change
netbufdup() to allocate the netbuf struct and the sockaddr buffer
separately, and change netbuffree() accordingly. This makes it
produce netbufs that are consistent with all other netbufs in
rpcbind.
comparing bit by bit.
Make the logic in in6_fillscopeid() match that in our ifconfig(8):
only set the scope ID if there is one in the address and none in
sin6_scope_id.
Correct a comment in network_init() that didn't make sense; it was
probably never updated after it was pasted from similar code in
addrmerge().
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
getopt(3) (and can't be converted without breaking compatibility), and
it's very irritating to have it silently DTWT if one combines options
together (e.g., "-msS domain,server").
to be included into this one. This works the same way as #include
does in C; as far as the user is concerned, the included file is
inlined into the current one.
Since config(8) is no longer limited to working on one user-supplied
file, printing just a line number in an error message is not
sufficient. The new global variable yyfile represents the file
currently being parsed, and must be printed as well.
Reviewed by: imp
Obtained from: OpenBSD
until a 20ms select(2) timeout occurs, but if there is a continuous
stream of movement events, button events can be delayed indefinitely
because the select never has to wait long enough for a timeout.
The delay and mouse event reordering that result are very noticable
and sometimes quite frustrating when dragging windows etc. in X.
Add a simple mechanism that avoids this re-ordering. While a button
event is deferred, we discard up to 3 movement events to allow for
mouse jitter. If more movement events occur, then we immediately
timeout the deferred button event and let the movement proceed.
This change only affects the 3-button emulation case.
perform a key change, *and* our sequence numbers have wrapped,
ensure that the number of key changes is calculated correctly.
The previous code counted down from a negative number to zero,
re-encrypting the current key on each iteration - this took some
time and strangely enough got the answer wrong !!!
Fix a(nother) spelling mistake while I'm there.
Use -tag list in the FILES section to work around the bug
when .Pa font is not restored to its original value if one
of the -hang, -ohang, or -inset lists is used in the FILES
section. (The fix for the bug has just been submitted to
the GNU Groff maintainers.)
Also, fixed the Handbook reference in the SEE ALSO.
reading variable sized blocks of data every second. This should be
more efficient.
Suggested & tested by: se
* Add a syntax for excluding CD-ROM drives etc.
Suggested by: des, se, many others...
Manual page updates coming soon.
envoked -- don't use them (as return values from open()), then
(say) close(STDIN_FILENO) when daemonising.
This is done by grabbing 3 descriptors to /dev/null at startup and
releasing them after we've daemonised.
MFC after: 1 week
This is necessary because MPPE will combine the protocol id with the
payload received on the tun interface, encrypt it, then prepend its
own protocol id, effectively increasing the payload by two bytes.
backslash as nothing, treat it like a space so that adjacent lines
aren't glued together.
PR: 8479
Submitted by: Adrian Filipi-Martin <adrian@ubergeeks.com>
give a bit more information about up to 10 errors encountered during
formatting (unless -q has been specified, of course).
While being here, removed a bitrotten comment in the Makefile, and
kill the old Emacs local variable stuff at the end of fdformat.c
that's no longer useful anway.
names suggest, they perform methods on Device's. In addition, they
check that the pointer passed to them is valid; if it isn't, they
pretend that the action failed. This fixes some crashes due to NULL
dereferences (e.g., PR 26509).
Approved by: jkh (some time ago)
avoid blasting the syslog with error messages from bad floppies. Both
tools have their own error reporting anyway (which could easily be
cluttered by the syslog output on your terminal).
one to see what files would be removed *if* an 'lpc clean' is done. 'tclean'
will remove no files, and is therefore not a privileged command. Also, both
'lpc clean' and 'lpc tclean' will now look for 'core' files in spool directories
(but not remove them). They also print out an extra line of info when a
datafile to be removed is a symlink (from 'lpr -s'), saying what file it is
a symlink to.
The 'lpc clean' commands also now print out a summary line saying how many
queues were checked, how many files were removed (or "would be" removed, for
tclean), and how much disk space is involved. For the benefit of those who
have many print queues, 'lpc clean all' will only print out the names of print
queues where some "interesting" files were found, instead of printing out a
header-line for every queue in your printcap file.
Reviewed by: freebsd-print@bostonradio.orgfreebsd-audit@FreeBSD.org
MFC after: 2 weeks
while -w allows connection from non-reserved ports. Also improves the
helpfulness of various connection-error messages.
The changes for IPv6 added back in the reserved-port check which was mistakenly
dropped from lpd in 1997 (copying a change from openbsd). It is best to have
that check in place, but the check breaks lpr's from some implementations of
lpr/lpd for Windows. The -w option is for those admins who need to accept
jobs from non-reserved ports, the -c option is for admins who would like a
print-server machine to log all failed connection-attempts to syslog.
Reviewed by: freebsd-audit@FreeBSD.orgfreebsd-print@bostonradio.org
MFC after: 2 weeks
contained a number of memory leaks. The changes include:
- Add a comment describing what addrmerge() does.
- Deal with 0.0.0.0./::. or AF_LOCAL callers correctly.
- Use rpcbind_get_conf() instead of getnetconfigent() so we don't
have to remember to free the returned netconfig struct.
- Make just one pass through the ifaddrs list; we can pick up a fallback
interface address in the same pass as the netmask comparison.
- Define and use SA2SIN* macros to avoid the need for loads of
protocol-specific local variables.
- Use mostly protocol-independent code for building the netbuf version
of the address to be returned.
- Use the common cleanup code for virtually all error and non-error
cases, fixing a number of memory leaks.
function has a return type of u_int32_t, into which it was somehow
supposed to encode:
* A valid 32-bit XID (which could be any value including 0).
* 0, meaning a duplicate request.
* -1, meaning a malloc failed (!);
We now ensure that all XIDs are non-zero, and pass the XID out via
a pointer argument.
In forward_find() and free_slot_by_xid(), remove an unnecessary
and confusing test for a negative result from an unsigned modulo
operation, but add an unnecessary cast to highlight why.
itself verbatim from INDEX. This fixes seg. faults with newer INDEX
files which have some gnome ports with outrageously long run deps.
Approved by: jkh
exist, and therefore mm_install is returning the "fail" value of
the test instead of the "success" value for install.
This change is a no-op on HEAD, but since the only harm on RELENG_4
ATM is a spurious warning it can follow the usual MFC practice.
Submitted by: A cast of thousands :-/
encryption compatibility with Windows 2000. Stateful encryption
uses less CPU but is bad on lossy transports.
The ``set mppe'' command has been expanded. If it's used with any
arguments, ppp will insist on encryption, closing LCP if the other
end refuses.
Unfortunately, Microsoft have abused the CCP reset request so that
receiving a reset request does not result in a reset ack when using
MPPE...
Sponsored by: Monzoon Networks AG and FreeBSD Services Limited
allow MRU/MTU negotiations to exceed 1492.
Add an optional ``max'' specifier to ``set m[rt]u'', ie.
set mtu max 1480
Bump the ppp version number.
Sponsored by: Monzoon Networks AG and FreeBSD Services Limited
sends error messages to stderr, normal output to stdout, instead of
logging everything via syslog.
Turn off the FORMAT_AUDIT in the Makefile, until I can figure out how
to disable the check for one single line in the source :(
Reviewed by: dd, silence on -audit
MFC after: 1 month
how to use this feature are in the man page. This is based on work
by Lyndon Nerenberg.
(The only difficult part about this patch is the fact that you
can't fchown a unix domain socket, which means the sockets must be
put in a secure directory).
Reviewed by: dillon
