This uses relative paths to make it more specific to avoid any potential
future problems with .PATH and leverages CONFS.
libc was picked as the destination location for these because of the syscalls
that use these files as the lowest level place they are referenced.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17163
This uses relative paths to make it more specific to avoid any potential
future problems with .PATH and leverages CONFS.
libc was picked as the destination location for these because of the syscalls
that use these files as the lowest level place they are referenced.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17164
The change resembles what was done in r334537 for kernel routines.
While here take care of i386 variants. Note that primitives remain
suboptimal.
Reviewed by: kib (previous version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17167
and transfer prints. Make sure the debug level comes from the
correct USB context.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231264
MFC after: 1 week
Approved by: re (kib)
Sponsored by: Mellanox Technologies
Not all event descriptions have a sample rate (such as inst_retired.any)
this will restore the legacy behavior of using 65536 in that case. It also
prevents accidental API misuse that could lead to panic.
PR: 230985
Reported by: markj
Reviewed by: markj
Approved by: re (gjb)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16958
I had disabled building of the aforementioned targets due to warnings breaking
tinderbox. This silences the warning and restores them to the build.
Reported by: jhibbits
Reviewed by: jhibbits
Approved by: re (gjb)
been detached. When a USB device has been detached the kernel file handle
stops responding to commands. USB applications which continue to run after
the USB device has been detached, depend on LibUSB generated events to tear
down its pending USB transfers. Add code to handle the needed cleanup when
processing the USB transfer(s) fails and prevent new USB transfer(s) from
being submitted.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231076
MFC after: 1 week
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
Apply some fixes post rS336659, which allowed multiple provders to be
initialized in a single command.
- Fix issue where second and subsequent providers would fail init.
This was due to the metadata struct being zeroed after the first
provider init was completed, despite containing common data required
for subsequent providers.
- Fix issue where -B "none" would still result in the metadata being
backed-up if multiple providers had been specified. This was due to
the backupfile of "none" being incorrectly made unique for each
provider by appending "-<prov>".
Approved by: asomers
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17096
Instead of relying on PROT_NONE mappings with MAP_ANON, use MAP_GUARD
to reserve address space around guest memory ranges including the
guard ranges of address space around mappings.
Submitted by: Shawn Webb
Reviewed by: araujo
Approved by: re (rgrimes)
MFC after: 1 month
Sponsored by: HardendBSD and G2, Inc
Differential Revision: https://reviews.freebsd.org/D16822
passing the authentication token to the external program.
Approved by: re (kib)
Submitted by: Thomas Munro <munro@ip9.org>
MFC after: 1 week
Differential Revision: D16950
Some paths through be_exists will set the error state, others will not
There are multiple reasons that a call can fail, so clean it up a bit: all
paths now return an appropriate error code so the caller can attempt to
distinguish between a BE legitimately not existing and just having the wrong
mountpoint. The caller is expected to bubble the error through to the
internal error handler as needed.
This fixes some unfriendliness with bectl(8)'s activate subcommand, where
it might fail due to a bad mountpoint but the only message output is a
generic "failed to activate" message.
Approved by: re (gjb)
For users who have a seperate zfs mount of /usr or /usr/lib, this will
cause dynamic loading failures when attempting to execute zfs mount on
bootup. E.g. the system won't boot.
Including <src.opts.mk> sets SHLIBDIR, so SHLIBDIR?= has no
effect. The other lib/ Makefiles solve this problem by moving the
SHLIBDIR assignment to before .include <src.opts.mk>.
Submitted by: jilles
Reviewed by: allanjude
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D16910
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
This fixes building libmd on MacOS/Linux. The real fix is probably to
build it as a .S file with $CC instead. It might also be better to just
compile the C file in userspace since the compiler can the use SSE/AVX.
Reviewed By: emaste, brooks
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16844
This adds it to devctl, libdevctl, defines the two IOCTLs and
implements the kernel bits. causes any new drivers that are added via
kldload to be deferred until a 'thaw' comes in. These do not stack: it
is an error to freeze while frozen, or thaw while thawed.
Differential Revision: https://reviews.freebsd.org/D16735
The current invocation of unifdef causes the build to fail when using a shell
with -o pipefail on by default since unifdef will return a non-zero exit status
if it changes something. The only thing this call to unifdef does is remove 5
lines that will be ignored by the compiler anyway. Furthermore, it is the only
make rule in the source tree that requires unifdef. Removing this call also
makes it slightly easier to build without inhering $PATH (D16815) since we
don't need unifdef anymore.
I also noticed that the sed call to replace the include guard has been broken
for over 10 years since the import of expat 2.0.1 changed it from
`XmlParse_INCLUDED` to `Expat_INCLUDED`. I could also fix this but since it's
been broken for so long and no one noticed, it's probably not necessary.
Reviewed By: emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14317
This helps with pkgbase by switching to CONFS so they are properly tagged as
config files.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16833
the domain of a socket.
This is helpful when testing and Solaris and Linux have the same
socket option using the same name.
Reviewed by: bcr@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16791
The assembly files use directives that only work for ELF targets so skip
them when bootstrapping on MacOS.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14247
Using find -s will not work with the Linux or MacOS find command. We pipe
to sort instead since the only real requirement here is that the order
stays the same. While I am touching this file I also fixed a `==` construct
which is not supported by POSIX sh but appears to work on FreeBSD.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14246
This will only work if the caller already handles SIGSYS, which is not
always the case.
Address this by checking osreldate instead. Note that because there
was not __FreeBSD_version bump when the system call was added, use
1200061 (r332100) which is the first bump after the introduction of
the system call.
PR: 230762
Reported by: Jenkins via Mark Millard
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D16807
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
Mention abort_handler_s(3) and ignore_handler_s(3), provide
cross-reference from memset(3).
Submitted by: Yuri Pankov <yuripv@yuripv.net>
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D16797
Some background: in the GSoC project, libbe/Makefile lived in lib/libbe. I
created projects/bectl branch, maintained the above for all of five
minutes before I misread Makefile.inc1 and decided that it couldn't possibly
build outside of cddl/, so I kicked the Makefile out into the cddl/ build
and all was good. The misreading was of the bit where .WAIT is added to
SUBDIR after lib, libexec but prior to building bin and cddl *only during
the install targets*, which is the critical part.
Fast forward- buildworld was still broken in my branch unbeknownst to me
because I didn't nuke my OBJDIR. Combing through Makefile.inc1 eventually
revealed the necessary magic to make sure that libbe's dependencies are
specified well enough, and it becomes clear what needs done to make a
non-cddl/ build work. This is an interesting prospect, because the build
split is kind of annoying to work with.
IGNORE_PRAGMA is added to avoid dropping WARNS by one more. This was
previously pulled in via cddl/Makefile.inc.
This basically adds makes use of the C99 restrict keyword, and also
adds some 'const's to four threading functions: pthread_mutexattr_gettype(),
pthread_mutexattr_getprioceiling(), pthread_mutexattr_getprotocol(), and
pthread_mutex_getprioceiling. The changes are in accordance to POSIX/SUSv4-2018.
Hinted by: DragonFlyBSD
Relnotes: yes
MFC after: 1 month
Differential Revision: D16722
The function retrieves the thread name previously set by
pthread_set_name_np(3). The name is cached in the process memory.
Requested by: Willem Jan Withagen <wjw@digiware.nl>
Man page update: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: ian (previous version)
Discussed with: arichardson, bjk (man page)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16702
Document efidev(4), provider of userland access to EFI Runtime Services. A link is created to efirtc(4), which handles the time-of-day clock side.
efirt(9) is the kernel side of this.
Reviewed by: imp, kib (earlier version)
Differential Revision: https://reviews.freebsd.org/D16696
Previously, we only validated names for character restrictions. This is
helpful, but we should've also checked length restrictions- dataset names
must be restricted to MAXNAMELEN.
While here, move validation before doing a bunch of concatenations and fix
error handling in be_rename. It was previously setting the error state based
on return value from a libzfs function, which is wrong: libzfs errors don't
necessarily match cleanly to libbe errors. This would cause the assertion in
be_error to hit when the error was printed.
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
