Commit Graph

7814 Commits

Author SHA1 Message Date
Marcel Moolenaar
0662d65037 Don't run verify directly as that would require the perl script to
have execute permissions. Run "perl verify" instead. Replace all
occurences of the hardcoding of ./verify with $(VERIFY) to allow
it to be overridden as well.
2003-08-13 03:59:18 +00:00
David Xu
43ebed5ee6 Always set tcb for bound thread, and switch tcb for M:N thread at correct
time.
2003-08-13 01:49:07 +00:00
David Xu
44498c15e0 Don't forget to set kcb_self. 2003-08-12 22:13:06 +00:00
David Xu
b29699fe04 Correctly set current tcb. This fixes some IA64/KSE problems.
Reviewed by: deischen, julian
2003-08-12 08:01:34 +00:00
Ian Dowse
8a16327d58 Make the documentation of PT_STEP match its implementation: the
`data' parameter is not ignored; if non-zero, it specifies a signal
number to be delivered to the traced process.

MFC after:	1 day
2003-08-11 13:13:46 +00:00
Bruce M Simpson
a57b72b4b9 Add the mlockall()/munlockall() system call manual page from NetBSD.
PR:		kern/42426, standards/54223
Obtained from:	NetBSD
Reviewed by:	jake, alc
Approved by:	jake (mentor)
MFC after:	2 weeks
2003-08-11 07:16:21 +00:00
Bruce M Simpson
abd498aa71 Add the mlockall() and munlockall() system calls.
- All those diffs to syscalls.master for each architecture *are*
   necessary. This needed clarification; the stub code generation for
   mlockall() was disabled, which would prevent applications from
   linking to this API (suggested by mux)
 - Giant has been quoshed. It is no longer held by the code, as
   the required locking has been pushed down within vm_map.c.
 - Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
   to express their intention explicitly.
 - Inspected at the vmstat, top and vm pager sysctl stats level.
   Paging-in activity is occurring correctly, using a test harness.
 - The RES size for a process may appear to be greater than its SIZE.
   This is believed to be due to mappings of the same shared library
   page being wired twice. Further exploration is needed.
 - Believed to back out of allocations and locks correctly
   (tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).

PR:             kern/43426, standards/54223
Reviewed by:    jake, alc
Approved by:    jake (mentor)
MFC after:	2 weeks
2003-08-11 07:14:08 +00:00
David Xu
5f1a6df490 Add some quick pathes to exit process when signal action is default and
signal can causes process to exit.

Reviewed by: deischen
2003-08-10 22:35:46 +00:00
David Xu
b2674f96cc Initialize rtld lock just before turning on thread mode and
uninitialize rtld lock after thread mode shutdown.
2003-08-10 22:30:20 +00:00
David Xu
7292e8d174 If thread mode is not activated yet, just call __sys_fork() directly,
otherwise masks all signals until fork() returns, in child process,
we reset library state before restoring signal masks until we reach
a safe to point.

Reviewed by: deischen
2003-08-10 22:20:41 +00:00
David Xu
3fceb84efd Tweak rtld lock to allow recursive on reader lock and detect recursive
on writer lock. This is first cut at rwlock for rtld.

Submitted by: desichen
2003-08-10 22:15:03 +00:00
David Xu
94fd4648c3 If thread mode is not activated yet, don't do extra work.
Reviewed by: deischen
2003-08-10 22:07:28 +00:00
Andrey A. Chernov
40220dde01 For type 0 rng lower initial drop to 50, it is enough to hide linearity
Reorganize historic #ifdef section
2003-08-10 17:49:55 +00:00
Tim J. Robbins
e43ffa4159 Fix the case of the encoding name in the ENCODING line. Names are
case-sensitive, and MSKANJI does not work.
2003-08-10 11:41:38 +00:00
Tim J. Robbins
dcb2df4c22 Cross-reference gbk(5). 2003-08-10 11:38:28 +00:00
Tim J. Robbins
dd5e8fdef8 Cross-reference gbk(5) now that it exists. Fix a copy & paste error:
one occurrence of GB 18030 should have been 11383.
2003-08-10 11:36:42 +00:00
Tim J. Robbins
f6d8a447d1 Add a fairly minimal manual page for the GBK encoding. 2003-08-10 11:34:35 +00:00
Tim J. Robbins
9e09ac8597 Add a cross reference to Unicode 3.0. 2003-08-10 11:26:18 +00:00
Tim J. Robbins
39e2a81e3f Add cross references to the new character encoding manual pages,
and to mbsinit(3) while I'm at it.
2003-08-10 09:25:52 +00:00
Tim J. Robbins
8ca5fa518c Add manual pages for the BIG5, GB18030 and MSKanji encodings. These may
need to be fleshed out a little, especially big5(5).
2003-08-10 09:23:51 +00:00
Marcel Moolenaar
03bab8d60f o There are 6 trap disable bits in ar.fpsr, not five. Even though we
didn't provide a constant for one of them (non-IEEE denormal trap),
  in an attempt to not support it probably, it's not we are left with
  the lower 5 bits.
o Properly mask the passed or returned fp_except_t. Not doing so
  causes instant core dumps by trying to write an invalid value to
  ar.fpsr. Now that we're masking, stop using exclusive-or to invert
  bits.

This fixes the illegal instruction fault encountered when building
mozilla.
2003-08-09 17:07:24 +00:00
Daniel Eischen
3d8239856c Add libpthread to the alpha build.
Requested by ru: Since the majority of archs can now support the
build of libpthread, rearrange the Makefile to treat libpthread
as an exception.
2003-08-09 15:29:52 +00:00
Daniel Eischen
530299d144 Add alpha support to libpthread. It compiles but hasn't been tested;
there is still some missing kernel support.

Reviewed by:	marcel
2003-08-09 05:44:27 +00:00
Daniel Eischen
df2edfa20a Add signalcontext() which will be needed by libpthread.
Reviewed by:	marcel
2003-08-09 05:37:54 +00:00
Bruce M Simpson
662d85d6a2 Add the POSIX 1003.1-2001 posix_madvise() interface.
PR:		standards/54634
Reviewed by:	das
Approved by:	jake (mentor)
2003-08-09 03:23:24 +00:00
David Xu
1771242836 o Add code to GC freed KSEs and KSE groups
o Fix a bug in kse_free_unlocked(), kcb_dtor shouldn't be called because
  the KSE is cached and will be resued in _kse_alloc().

Reviewed by: deischen
2003-08-08 22:20:59 +00:00
Daniel Eischen
de1b32cd37 Since it builds and seems to work OK, add libpthread to the amd64 build. 2003-08-08 21:16:06 +00:00
Marcel Moolenaar
10b35e00c9 Remove stale DCE 1.1 pointers to the IBM site. The URLs aren't valid
anymore. This also fixes long line bugs caused by the lengthy URLs :-)
2003-08-08 19:18:43 +00:00
Marcel Moolenaar
38e35b968e Fix markup for uuid_equal() 2003-08-08 19:12:28 +00:00
Marcel Moolenaar
3031a4311e Fix two (2) bugs in one (1) statement:
o  fix the len argument of memcmp(3) to be the size of the node field
   of the uuid structure, not the size of the uuid structure itself.
   We're comparing the node fields...
o  uuid_compare(3) is specified to return -1, 0 or 1, depending on
   the outcome of the comparison. memcmp(3) returns the difference
   between the first differing bytes. Hence, we cannot ever return
   the return value of memcmp(3) as-is.

PR: standards/55370
Submitted by: Konstantin Oznobihin <bork@rsu.ru>
2003-08-08 19:03:37 +00:00
Jake Burkholder
b551cb80d4 Implement signalcontext. 2003-08-08 15:40:28 +00:00
Alexander Kabaev
dd83c5f0a2 Allow gcc driver to process -r option iself, do not use -Wl,-r to
bypass it. Doing otherwise did not allow compiler to detect and disable
conflicting options generated from specs.

Reported by:	jake
2003-08-08 03:41:13 +00:00
Tim J. Robbins
b85aa4e3f7 Implement mblen(s, n) as mbtowc(NULL, s, n) to avoid calling sgetrune()
and to simplify things. This is only valid until we start supporting
state-dependent encodings.
2003-08-07 09:34:51 +00:00
Tim J. Robbins
b69a98d6d3 Implement mbstowcs() as a wrapper around mbsrtowcs(), and wcstombs()
as a wrapper around wcsrtombs().
2003-08-07 08:04:01 +00:00
Marcel Moolenaar
778a4a9dd4 Grok async contexts. When a thread is interrupted and an upcall
happens, the context of the interrupted thread is exported to
userland. Unlike most contexts, it will be an async context and
we cannot easily use our existing functions to set such a
context.
To avoid a lot of complexity that may possibly interfere with
the common case, we simply let the kernel deal with it. However,
we don't use the EPC based syscall path to invoke setcontext(2).
No, we use the break-based syscall path. That way the trapframe
will be compatible with the context we're trying to restore and
we save the kernel a lot of trouble. The kind of trouble we did
not want to go though ourselves...

However, we also need to set the threads mailbox and there's no
syscall to help us out. To avoid creating a new syscall, we use
the context itself to pass the information to the kernel so that
the kernel can update the mailbox. This involves setting a flag
(_MC_FLAGS_KSE_SET_MBOX) and setting ifa (the address) and isr
(the value).
2003-08-07 08:03:05 +00:00
Tim J. Robbins
998e124837 Implement mbtowc() in terms of mbrtowc(), and wctomb() in terms of wcrtomb(). 2003-08-07 07:59:36 +00:00
Tim J. Robbins
dab4fca49b Implement btowc() in terms of mbrtowc() instead of sgetrune(), and
wctob() in terms of wcrtomb() instead of sputrune(). There should be
no functional differences, but there may be a small performance hit
because we make an extra function call.

The aim here is to have as few functions as possible calling
s{get,put}rune() to make it easier to remove them in the future.
2003-08-07 07:45:35 +00:00
Yaroslav Tykhiy
92a9c0bd86 Document that connect(2) can return EINTR, and that it
can return EALREADY for a socket in blocking mode as well.
2003-08-06 14:21:06 +00:00
Daniel Eischen
39521cdb3c Fix a typo. s/Line/Like/ 2003-08-06 06:12:54 +00:00
Marcel Moolenaar
d7c68311ee Avoid a level of indirection to get from the thread pointer to the
TCB. We know that the thread pointer points to &tcb->tcb_tp, so all
we have to do is subtract offsetof(struct tcb, tcb_tp) from the
thread pointer to get to the TCB. Any reasonably smart compiler will
translate accesses to fields in the TCB as negative offsets from TP.

In _tcb_set() make sure the fake TCB gets a pointer to the current
KCB, just like any other TCB. This fixes a NULL-pointer dereference
in _thr_ref_add() when it tried to get the current KSE.
2003-08-06 04:17:42 +00:00
Daniel Eischen
fc40494359 Don't call kse_set_curthread() when scheduling a new bound
thread.  It should only be called by the current kse and
never by a KSE on behalf of another.

Submitted by:	davidxu
2003-08-06 00:43:28 +00:00
Marcel Moolenaar
4a997ca96e Fix an off by one error in the number of arguments passed to
makecontext(). We only supply 3, not 4. This is mostly harmless,
except that on ia64 the garbage can include NaT bits, resulting
in NaT consumption faults.
2003-08-06 00:23:40 +00:00
Marcel Moolenaar
119fb38770 Define the static TLS as an array of long double. This will guarantee
that the TLS is 16-byte aligned, as well as guarantee that the thread
pointer is 16-byte aligned as it points to struct ia64_tp. Likewise,
struct tcb and struct ksd are also guaranteed to be 16-byte aligned
(if they weren't already).
2003-08-06 00:17:15 +00:00
Daniel Eischen
199d58cbfc Use auto LDT allocation for i386. 2003-08-05 23:09:22 +00:00
Daniel Eischen
59c3b99b8f Rethink the MD interfaces for libpthread to account for
archs that can (or are required to) have per-thread registers.

Tested on i386, amd64; marcel is testing on ia64 and will
have some follow-up commits.

Reviewed by:	davidxu
2003-08-05 22:46:00 +00:00
Marcel Moolenaar
9a3ea63e79 Define THR_GETCONTEXT and THR_SETCONTEXT in terms of the userland
context functions. We don't need to enter the kernel anymore. The
contexts are compatible (ie a context created by getcontext() can
be restored by _ia64_restore_context()).

While here, make the use of THR_ALIGNBYTES and THR_ALIGN a no-op.
They are going to be removed anyway.
2003-08-05 19:37:20 +00:00
Marcel Moolenaar
50be3a75cc o In _ia64_save_context() clear the return registers except for r8.
We write 1 for r8 in the context so that _ia64_restore_context()
   will return with a non-zero value. _ia64_save_context() always
   return 0.
o  In _ia64_restore_context(), don't restore the thread pointer. It
   is not normally part of the context. Also, restore the return
   registers. We get called for contexts created by getcontext(),
   which means we have to restore all the syscall return values.
2003-08-05 19:33:01 +00:00
John-Mark Gurney
95aab9cc49 add support for using kqueue to watch bpf sockets.
Submitted by:	Brian Buchanan of nCircle, Inc.
Tested on:	i386 and sparc64
2003-08-05 07:12:49 +00:00
Andrey A. Chernov
90862ca23d LANG->LC_ALL
Pointed by:     ru
2003-08-04 21:31:53 +00:00
Julian Elischer
5774db75bd Allow foot shooting as Linux emulation needs it.
Also change "Auto mode" to use a "special" value
instead of 0, and define and document it.
I had thought libpthread had already been switched to use auto mode but
it appears that patch hasn't been committed yet.

Discussed with:	 Davidxu
2003-08-04 19:11:56 +00:00