is compared against the entry expiration time value (that was set based
on time_second) to check if the current time is larger than the set
expiration time. Due to the +/- timer granularity value, the comparison
returns false, causing the alternative code to be executed. The
alternative code path freed the memory without removing that entry
from the table list, causing a use-after-free bug.
Reviewed by: discussed with kmacy
MFC after: immediately
Verified by: rnoland, yongari
1. There is a regression issue in the ARP code. The incomplete
ARP entry was timing out too quickly (1 second timeout), as
such, a new entry is created each time arpresolve() is called.
Therefore the maximum attempts made is always 1. Consequently
the error code returned to the application is always 0.
2. Set the expiration of each incomplete entry to a 20-second
lifetime.
3. Return "incomplete" entries to the application.
Reviewed by: kmacy
MFC after: 3 days
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.
Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months
segment is likely to trigger a TCP state change (i.e., FIN/RST/SYN).
If we later have to upgrade the lock, we acquire an inpcb reference
and drop both global/inpcb locks before reacquiring in-order. In
that gap, the connection may transition into TIMEWAIT, so we need
to loop back and reevaluate the inpcb after relocking.
MFC after: 3 days
Reported by: Kamigishi Rei <spambox at haruhiism.net>
Reviewed by: bz
triggered by a misconfigured host that is sending out gratuious ARPs.
This log message can also be triggered during a network renumbering
event when multiple prefixes co-exist on a single network segment.
MFC after: immediately
this address alias has a prefix matching that of another address
configured on the same interface, then the ARP entry for the alias
is not deleted from the ARP table when that address alias is removed.
This patch fixes the aforementioned issue.
PR: kern/139113
MFC after: 3 days
When authenticating DATA chunks some DATA chunks
might get stuck when the MTU gets decreased via
an ICMP message.
Approved by: rrs (mentor)
MFC after: immediately
feature when you have a seemingly stuck socket and want to figure
out why it has not been closed yet.
No plans to MFC this, as it changes the netstat sysctl ABI.
Reviewed by: andre, rwatson, Eric Van Gyzen
TCP_SORECEIVE_STREAM for the time being.
Requested by: brooks
Once compiled in make it easily switchable for testers by using a tuneable
net.inet.tcp.soreceive_stream
and a corresponding read-only sysctl to report the current state.
Suggested by: rwatson
MFC after: 2 days
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
MFC after: immediately
module tries to install the same address again. This extra code
is removed, which was discovered by the removal of a call to
in_ifscrub() in r196714. This call to in_ifscrub is put back here
because the SIOCAIFADDR command can be used to change the prefix
length of an existing alias.
Reviewed by: kmacy
within the system that owns the interface. Packets destined to
the local end point leak to the wire towards the default gateway
if one exists. This behavior is changed as part of the L2/L3
rewrite efforts. The local end point is now reachable within the
system. The inpcb code needs to consider this fact during the
address selection process.
Reviewed by: bz
MFC after: immediately
1) A lock issue, if we ever had to try again
we would double lock the INP lock.
2) We were allowing (at wrap) associd 0... which really
we cannot allow since 0 normally means in most socket
API calls that we are wishing to effect something on
the INP not TCB.
MFC after: 1 week
This is almost always pilot error.
We don't need to check for group filter UNDEFINED state at t1,
because we only ever allocate filters with their groups, so we
unconditionally reject such calls with EINVAL.
Trying to change the active filter mode w/o going through IP_MSFILTER
is also disallowed.
Deals with the case described in PR 137164 upfront, cumulative
with the fix in svn rev 197132 which only calls imo_match_source()
if the source address family was not unspecified.
PR: 137164
MFC after: 5 days
* Don't try to use the source address, when its family is unspecified.
* If we get a join without a source, on an existing inclusive
mode group, this is an error, as it would change the filter mode.
Fix a problem with the handling of in_mfilter for new memberships:
* Do not rely on imf being NULL; it is explicitly initialized to a
non-NULL pointer when constructing a membership.
* Explicitly initialize *imf to EX mode when the source address
is unspecified.
This fixes a problem with in_mfilter slot recycling in the join path.
PR: 138690
Submitted by: Stef Walter
MFC after: 5 days
* Do not assume that the group lookup performed by imo_match_group()
is valid when ifp is NULL in this case.
* Instead, return EADDRNOTAVAIL if the ifp cannot be resolved for the
membership we are being asked to leave.
Caveat user:
* The way IPv4 multicast memberships are implemented in the inpcb layer
at the moment, has the side-effect that struct ip_moptions will
still hold the membership, under the old ifp, until ip_freemoptions()
is called for the parent inpcb.
* The underlying issue is: the inpcb layer does not get notification
of ifp being detached going away in a thread-safe manner.
This is non-trivial to fix.
But hey, at least the kernel should't panic when you unplug a card.
PR: 138689
Submitted by: Stef Walter
MFC after: 5 days
has not worked since the arp-v2 rewrite.
The event handler will be called with the llentry write-locked and
can examine la_flags to determine whether the entry is being added
or removed.
Reviewed by: gnn, kmacy
Approved by: gnn (mentor)
MFC after: 1 month
include file, and include this where the previous duplicate definitions were.
Static program checkers like FlexeLint rightfully take a dim view of
duplicate definitions, even if they currently are identical.
does a KASSERT that the group address is multicast, so the
check if this is indeed true and eventually return a EINVAL if not,
should be done before calling inp_lookup_mcast_ifp. This fixes a kernel
crash when calling setsockopt (sock, IPPROTO_IP, IP_ADD_MEMBERSHIP,...)
with invalid group address.
Reviewed by: bms
Approved by: bms
MFC after: 3 days
New counters now exist for:
requests sent
replies sent
requests received
replies received
packets received
total packets dropped due to no ARP entry
entrys timed out
Duplicate IPs seen
The new statistics are seen in the netstat command
when it is given the -s command line switch.
MFC after: 2 weeks
In collaboration with: bz
L2 code does not have the ethernet address for the destination
within the broadcast domain in the table, we remember the
original mbuf in `la_hold' in arpresolve() and send out a
different packet with an arp request.
In case there will be more upper layer packets to send we will
free an earlier one held in `la_hold' and queue the new one.
Once we get a packet in, with which we can perfect our arp table
entry we send out the original 'on hold' packet, should there
be any.
Rather than continuing to process the packet that we received,
we returned without freeing the packet that came in, which
basically means that we leaked an mbuf for every arp request
we sent.
Rather than freeing the received packet and returning, continue
to process the incoming arp packet as well.
This should (a) improve some setups, also proxy-arp, in case it was an
incoming arp request and (b) resembles the behaviour FreeBSD had
from day 1, which alignes with RFC826 "Packet reception" (merge case).
Rename 'm0' to 'hold' to make the code more understandable as
well as diffable to earlier versions more easily.
Handle the link-layer entry 'la' lock comepletely in the block
where needed and release it as early as possible, rather than
holding it longer, down to the end of the function.
Found by: pointyhat, ns1
Bug hunting session with: erwin, simon, rwatson
Tested by: simon on cluster machines
Reviewed by: ratson, kmacy, julian
MFC after: 3 days
- Routing messages are not generated when adding and removing
interface address aliases.
- Loopback route installed for an interface address alias is
not deleted from the routing table when that address alias
is removed from the associated interface.
- Function in_ifscrub() is called extraneously.
Reviewed by: gnn, kmacy, sam
MFC after: 3 days
ip_output() if the cached route was not initialized from the
flow-table. The rt_lle entry is invalid unless it has been
initialized through the flow-table.
Reviewed by: kmacy, rwatson
MFC after: immediately
list/index locks, to protect link layer address tables. This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.
Reviewed by: bz, kmacy
MFC after: 3 days
1) When calculating the table offset for sliding the sack
array, the two byte values must be "ored" together in order
for us to do the correct sliding of the arrays.
2) We were NOT properly doing CC and other changes to things only
NR-Sacked. The solution here is to make a separate function that
will actually do both CC/updates and free things if its NR sack'd.
This actually shrinks out common code from three places (much better).
MFC after: 3 days
from the existing modevent / MOD_UNLOAD handler, and register div_destroy()
in protosw as per-vnet .pr_destroy() handler for options VIMAGE builds. In
nooptions VIMAGE builds, div_destroy() will be invoked from the modevent
handler, resulting in effectively identical operation as it was prior this
change. div_destroy() also tears down hashtables used by ipdivert, which
were previously left behind on ipdivert kldunloads.
For options VIMAGE builds only, temporarily disable kldunloading of ipdivert,
because without introducing additional locking logic it is impossible to
atomically check whether all ipdivert instances in all vnets are idle, and
proceed with cleanup without opening a race window for a vnet to open an
ipdivert socket while ipdivert tear-down is in progress.
While here, staticize div_init(), because it is not used outside of
ip_divert.c.
In cooperation with: julian
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
to allow vnet and non vnet operation. Move some functions from ip_fw_pfil.c
to ip_fw2.c and mode to mostly using the SYSINIT and VNET_SYSINIT handlers
instead of the modevent handler. Correct some spelling errors in comments
in the affected code. Note this bug fixes a crash in NON VIMAGE kernels when
ipfw is unloaded.
This patch is a minimal patch for 8.0
I have a much larger patch that actually fixes the underlying problems
that will be applied after 8.0
Reviewed by: zec@, rwatson@, bz@(earlier version)
Approved by: re (rwatson)
MFC after: Immediatly
CARP tries to free them using M_IFADDR after the last address for a virtual
host is removed and when detaching from the parent interface.
Reviewed by: mlaier
Approved by: re (kib), ken (mentor)
the mbuf for obtaining the fib index
- check that a cached flow corresponds to the same fib index as the
packet for which we are doing the lookup
- at interface detach time flush any flows referencing stale rtentrys
associated with the interface that is going away (fixes reported
panics)
- reduce the time between cleans in case the cleaner is running at
the time the eventhandler is called and the wakeup is missed less
time will elapse before the eventhandler returns
- separate per-vnet initialization from global initialization
(pointed out by jeli@)
Reviewed by: sam@
Approved by: re@
association setup.
* Fix a bug where message with illegal stream ids are not deleted.
* Fix a crash when reporting back unsent messages from the send_queue.
* Fix a bug related to INIT retransmission when the socket is already
closed.
* Fix a bug where associations were stalled when partial delivery API
was enabled.
* Fix a bug where the receive buffer size was smaller than the
partial_delivery_point.
Approved by: re, rrs (mentor)
MFC after: One day.
mismatch between the cached entry and the intended destination. The
cached rtentry{} is flushed but the associated llentry{} is not. This
causes the wrong destination MAC address being used in the output
packets. The fix is to flush the llentry{} when rtentry{} is cleared.
Reviewed by: kmacy, rwatson
Approved by: re
Receiving any ip packet for which there is no existing socket will
crash if ipfw has a uid or gid test rule, as the uid/gid
of the non existent owner of said non existent socket is tested.
Brooks introduced this error as part of his >16 gids patch.
It appears to be a cut-n-paste error from similar code a few lines
before. The old code used the 'pcb' variable here, but in the
new code that switched the 'inp' variable, which is often NULL
and what is tested in the code further up. The rest of the multi-gid
patch for ipfw seems solid (and cleaner than previous code).
Reviewed by: brooks
Approved by: re (rwatson)
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
processing code holds the read lock (when processing a
FWD-TSN for pr-sctp). If it finds stranded data that
can be given to the application, it calls sctp_add_to_readq().
The readq function also grabs this lock. So if INVAR is on
we get a double recurse on a non-recursive lock and panic.
This fix will change it so that readq() function gets a
flag to tell if the lock is held, if so then it does not
get the lock.
Approved by: re@freebsd.org (Kostik Belousov)
MFC after: 1 week
- Allow loopback route to be installed for address assigned to
interface of IFF_POINTOPOINT type.
- Install loopback route for an IPv4 interface addreess when the
"useloopback" sysctl variable is enabled. Similarly, install
loopback route for an IPv6 interface address when the sysctl variable
"nd6_useloopback" is enabled. Deleting loopback routes for interface
addresses is unconditional in case these sysctl variables were
disabled after an interface address has been assigned.
Reviewed by: bz
Approved by: re
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
non-vrtiualized sysctls so we cannot used one common function.
Add a macro to convert the arg1 in the virtualized case to
vnet.h to not expose the maths to all over the code.
Add a wrapper for the single virtualized call, properly handling
arg1 and call the default implementation from there.
Convert the two over places to use the new macro.
Reviewed by: rwatson
Approved by: re (kib)
back to the bottom of ip_init() as found in 7.x. I missed the fact that
the bottom half of the init routine only runs in the !VNET case.
Submitted by: zec
Approved by: re (vimage blanket)
nor destructors, as there's no actual work to do.
In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.
Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.
Reviewed by: bz
Approved by: re (vimage blanket)
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use). Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.
Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions. Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.
Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.
Update various consumers of these KPIs based on whether they may sleep
or not.
Reviewed by: bz
Approved by: re (kib)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
which is currently not protected by any type of lock. When triggered, the bug
would sometimes cause a panic when the TCP activity to an affected machine
eventually slowed during a lull. The panic only occurs if INVARIANTS is compiled
into the kernel, and has laid dormant for some time as a result of INVARIANTS
being off by default except in FreeBSD-CURRENT.
Switch to atomic operations in the locations where the variable is changed.
Reads have not been updated to be protected by atomics, so there is a
possibility of accounting errors in any given calculation where the variable is
read. This is considered unlikely to occur in the wild, and will not cause
serious harm on rare occasions where it does.
Thanks to Robert Watson for debugging help.
Reported by: Kamigishi Rei <spambox at haruhiism dot net>
Tested by: Kamigishi Rei <spambox at haruhiism dot net>
Reviewed by: silby
Approved by: re (rwatson), kensmith (mentor temporarily unavailable)
the TCP syncache. This returns struct tcpopt to being private within the TCP
implementation, thus allowing it to be modified without ABI concerns.
The patch breaks the ABI. Bump __FreeBSD_version to 800103 accordingly. The cxgb
driver is the only TOE consumer affected by this change, and needs to be
recompiled along with the kernel.
Suggested by: rwatson
Reviewed by: rwatson, kmacy
Approved by: re (kensmith), kensmith (mentor temporarily unavailable)
back to the 8 branch:
tcp_var.h
- struct sackhint
- struct tcpcb
- struct tcpstat
The patch breaks the ABI. Bump __FreeBSD_version to 800102 accordingly. User
space tools that rely on the size of any of these structs (e.g. sockstat) need
to be recompiled.
Reviewed by: rpaulo, sam, andre, rwatson
Approved by: re & mentor (gnn)
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.
Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.
Reviewed by: bz
MFC after: 6 weeks
in_ifaddrhead and INADDR_HASH address lists.
Previously, these lists were used unsynchronized as they were effectively
never changed in steady state, but we've seen increasing reports of
writer-writer races on very busy VPN servers as core count has gone up
(and similar configurations where address lists change frequently and
concurrently).
For the time being, use rwlocks rather than rmlocks in order to take
advantage of their better lock debugging support. As a result, we don't
enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion
is complete and a performance analysis has been done. This means that one
class of reader-writer races still exists.
MFC after: 6 weeks
Reviewed by: bz
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead). Adopt
the code styles and conventions present in netinet where possible.
Reviewed by: gnn, bz
MFC after: 6 weeks (possibly not MFCable?)
'ifa' was used as the TAILQ_FOREACH() iterator argument, and 'ia' was just
derived form it, it could be left non-NULL which confused later
conditional freeing code. This could cause kernel panics if multicast IP
packets were received. [1]
Call 'struct in_ifaddr *' in ip_rtaddr() 'ia', not 'ifa' in keeping with
normal conventions.
When 'ipstealth' is enabled returns from ip_input early, properly release
the 'ia' reference.
Reported by: lstewart, sam [1]
MFC after: 6 weeks
to save the selected source address rather than returning an
unreferenced copy to a pointer that might long be gone by the
time we use the pointer for anything meaningful.
Asked for by: rwatson
Reviewed by: rwatson
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:
ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr
Remove unused macro which didn't have required referencing:
IFP_TO_IA6
This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.
Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.
Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)
stream (TCP) sockets.
It is functionally identical to generic soreceive() but has a
number stream specific optimizations:
o does only one sockbuf unlock/lock per receive independent of
the length of data to be moved into the uio compared to
soreceive() which unlocks/locks per *mbuf*.
o uses m_mbuftouio() instead of its own copy(out) variant.
o much more compact code flow as a large number of special
cases is removed.
o much improved reability.
It offers significantly reduced CPU usage and lock contention
when receiving fast TCP streams. Additional gains are obtained
when the receiving application is using SO_RCVLOWAT to batch up
some data before a read (and wakeup) is done.
This function was written by "reverse engineering" and is not
just a stripped down variant of soreceive().
It is not yet enabled by default on TCP sockets. Instead it is
commented out in the protocol initialization in tcp_usrreq.c
until more widespread testing has been done.
Testers, especially with 10GigE gear, are welcome.
MFP4: r164817 //depot/user/andre/soreceive_stream/
This change should make options VIMAGE kernel builds usable again,
to some extent at least.
Note that the size of struct vnet_inet has changed, though in
accordance with one-bump-per-day policy we didn't update the
__FreeBSD_version number, given that it has already been touched
by r194640 a few hours ago.
Reviewed by: bz
Approved by: julian (mentor)
a pointer to an ifaddr matching the passed socket address, returns a
boolean indicating whether one was present. In the (near) future,
ifa_ifwithaddr() will return a referenced ifaddr rather than a raw
ifaddr pointer, and the new wrapper will allow callers that care only
about the boolean condition to avoid having to free that reference.
MFC after: 3 weeks
- Unify reference count and lock initialization in a single function,
ifa_init().
- Move tear-down from a macro (IFAFREE) to a function ifa_free().
- Move reference count bump from a macro (IFAREF) to a function ifa_ref().
- Instead of using a u_int protected by a mutex to refcount(9) for
reference count management.
The ifa_mtx is now used for exactly one ioctl, and possibly should be
removed.
MFC after: 3 weeks
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
missing it.
Remove the "hidden" kernel only include of vimage.h from ip_var.h added
with the very first Vimage commit r181803 to avoid further kernel poisoning.
1) All bit disappears
2) The two sets of gaps (nr and non-nr) are
disjointed, you don't have gaps struck in
both places.
This adjusts us to coorespond to the new draft. Still
to-do, cleanup the code so that there are only one set
of sack routines (original NR-Sack done by E cloned all
sack code).
t_rcvtime, t_starttime, t_rtttime, t_bw_rtttime, ts_recent_age,
t_badrxtwin.
- Change t_recent in struct timewait from u_long to u_int32_t to match
the type of the field it shadows from tcpcb: ts_recent.
- Change t_starttime in struct timewait from u_long to u_int to match
the t_starttime field in tcpcb.
Requested by: bde (1, 3)
actual implementation.
Remove the accessor functions for the compiled out case, just returning
"unavail" values. Remove the kernel conditional from the header file as
it is no longer needed, only leaving the externs.
Hide the improperly virtualized SYSCTL/TUNABLE for the flowtable size
under the kernel option as well.
Reviewed by: rwatson
Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...
X-MFC: never
Reviewed by: bz
Approved by: gnn(mentor)
Obtained from: NETASQ
instead of unsigned longs. This fixes a few overflow edge cases on 64-bit
platforms. Specifically, if an idle connection receives a packet shortly
before 2^31 clock ticks of uptime (about 25 days with hz=1000) and the keep
alive timer fires after 2^31 clock ticks, the keep alive timer will think
that the connection has been idle for a very long time and will immediately
drop the connection instead of sending a keep alive probe.
Reviewed by: silby, gnn, lstewart
MFC after: 1 week
and use malloc() instead if/when it is necessary.
The problem is less relevant in previous versions because
the variable involved (tmp_pipe) is much smaller there.
Still worth fixing though.
Submitted by: Marta Carbone (GSOC)
MFC after: 3 days
In case of !INET we will not have a timestamp on the trace for now
but that might only affect spx debugging as long as INET6 requires
INET.
Reviewed by: rwatson (earlier version)
- clear the head pointer immediately before using it, so there is
no chance of mistakes;
- call reap_rules() unconditionally. The function can handle a NULL
argument just fine, and the cost of the extra call is hardly
significant given that we do it rarely and outside the lock.
MFC after: 3 days
If packet leaves ipfw to other kernel subsystem (dummynet, netgraph, etc)
it carries pointer to matching ipfw rule. If this packet then reinjected back
to ipfw, ruleset processing starts from that rule. If rule was deleted
meanwhile, due to existed race condition panic was possible (as well as
other odd effects like parsing rules in 'reap list').
P.S. this commit changes ABI so userland ipfw related binaries should be
recompiled.
MFC after: 1 month
Tested by: Mikolaj Golub
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
adjust conf/files and modules' Makefiles accordingly.
No code or ABI changes so this and most of previous related
changes can be easily MFC'ed
MFC after: 5 days
pipes, queues, tags, rule numbers and so on.
These are all different namespaces, and the only thing they have in
common is the fact they use a 16-bit slot to represent the argument.
There is some confusion in the code, mostly for historical reasons,
on how the values 0 and 65535 should be used. At the moment, 0 is
forbidden almost everywhere, while 65535 is used to represent a
'tablearg' argument, i.e. the result of the most recent table() lookup.
For now, try to use explicit constants for the min and max allowed
values, and do not overload the default rule number for that.
Also, make the MTAG_IPFW declaration only visible to the kernel.
NOTE: I think the issue needs to be revisited before 8.0 is out:
the 2^16 namespace limit for rule numbers and pipe/queue is
annoying, and we can easily bump the limit to 2^32 which gives
a lot more flexibility in partitioning the namespace.
MFC after: 5 days
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
structure contents are a bad idea in the kernel for binary
compatibility reasons, and this is a single pointer that is now included
in compiles by default anyway due to options MAC being in GENERIC.
+ move ipfw and dummynet hooks declarations to raw_ip.c (definitions
in ip_var.h) same as for most other global variables.
This removes some dependencies from ip_input.c;
+ remove the IPFW_LOADED macro, just test ip_fw_chk_ptr directly;
+ remove the DUMMYNET_LOADED macro, just test ip_dn_io_ptr directly;
+ move ip_dn_ruledel_ptr to ip_fw2.c which is the only file using it;
To be merged together with rev 193497
MFC after: 5 days
stuff to its own directory, and cleaning headers and dependencies:
In this commit:
+ remove one use of a typedef;
+ document dn_rule_delete();
+ replace one usage of the DUMMYNET_LOADED macro with its value;
No MFC planned until the cleanup is complete.
of the credit of a pipe. On passing, also use explicit
signed/unsigned types for two other fields.
Noticed by Oleg Bulyzhin and Maxim Ignatenko long ago,
i forgot to commit the fix.
Does not affect RELENG_7.
modules are loaded by avoiding mbuf label lookups when policies aren't
loaded, pushing further socket locking into MAC policy modules, and
avoiding locking MAC ifnet locks when no policies are loaded:
- Check mac_policies_count before looking for mbuf MAC label m_tags in MAC
Framework entry points. We will still pay label lookup costs if MAC
policies are present but don't require labels (typically a single mbuf
header field read, but perhaps further indirection if IPSEC or other
m_tag consumers are in use).
- Further push socket locking for socket-related access control checks and
events into MAC policies from the MAC Framework, so that sockets are
only locked if a policy specifically requires a lock to protect a label.
This resolves lock order issues during sonewconn() and also in local
domain socket cross-connect where multiple socket locks could not be
held at once for the purposes of propagatig MAC labels across multiple
sockets. Eliminate mac_policy_count check in some entry points where it
no longer avoids locking.
- Add mac_policy_count checking in some entry points relating to network
interfaces that otherwise lock a global MAC ifnet lock used to protect
ifnet labels.
Obtained from: TrustedBSD Project
count of the number of registered policies.
Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.
This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.
Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.
Obtained from: TrustedBSD Project
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
an accessor function to get the correct rnh pointer back.
Update netstat to get the correct pointer using kvm_read()
as well.
This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.
Reviewed by: julian, rwatson, zec
X-MFC: not possible
* Tighten v1 query input processing.
* Borrow changes from MLDv2 for how general queries are processed.
* Do address field validation upfront before accepting input.
* Do NOT switch protocol version if old querier present timer active.
* Always clear IGMPv3 state in igmp_v3_cancel_link_timers().
* Update comments.
Tested by: deeptech71 at gmail dot com
threads:
- Support up to one netisr thread per CPU, each processings its own
workstream, or set of per-protocol queues. Threads may be bound
to specific CPUs, or allowed to migrate, based on a global policy.
In the future it would be desirable to support topology-centric
policies, such as "one netisr per package".
- Allow each protocol to advertise an ordering policy, which can
currently be one of:
NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
an implicit or explicit source (such as an interface or socket).
NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
as well as allowing protocols to provide a flow generation function
for mbufs without flow identifers (m2flow). Falls back on
NETISR_POLICY_SOURCE if now flow ID is available.
NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
each packet handled by netisr (m2cpuid).
- Provide utility functions for querying the number of workstreams
being used, as well as a mapping function from workstream to CPU ID,
which protocols may use in work placement decisions.
- Add explicit interfaces to get and set per-protocol queue limits, and
get and clear drop counters, which query data or apply changes across
all workstreams.
- Add a more extensible netisr registration interface, in which
protocols declare 'struct netisr_handler' structures for each
registered NETISR_ type. These include name, handler function,
optional mbuf to flow ID function, optional mbuf to CPU ID function,
queue limit, and ordering policy. Padding is present to allow these
to be expanded in the future. If no queue limit is declared, then
a default is used.
- Queue limits are now per-workstream, and raised from the previous
IFQ_MAXLEN default of 50 to 256.
- All protocols are updated to use the new registration interface, and
with the exception of netnatm, default queue limits. Most protocols
register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
NETISR_POLICY_FLOW, and will therefore take advantage of driver-
generated flow IDs if present.
- Formalize a non-packet based interface between interface polling and
the netisr, rather than having polling pretend to be two protocols.
Provide two explicit hooks in the netisr worker for start and end
events for runs: netisr_poll() and netisr_pollmore(), as well as a
function, netisr_sched_poll(), to allow the polling code to schedule
netisr execution. DEVICE_POLLING still embeds single-netisr
assumptions in its implementation, so for now if it is compiled into
the kernel, a single and un-bound netisr thread is enforced
regardless of tunable configuration.
In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.
Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.
An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking. It will be enabled once further rmlock
optimization has taken place. However, in practice, netisrs are
rarely registered or unregistered at runtime.
A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.
This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.
Bump __FreeBSD_version.
Reviewed by: bz
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
as there is no more space for more SOL_SOCKET options, but this option also
fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
functionality (currently only unjail root can use it).
Discussed with: julian, adrian, jhb, rwatson, kmacy
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
of ip_forward(), if the IPSEC is compiled in. It is possible that there
is an SPD that this packets will go through, even if there is no matching
route. If not, ICMP will be sent anyway, after ip_output().
This is somewhat similar in purpose to r191621, except that one was
for the packets sent from the host, while this one is for packets
being forwarded by the host.
Reviewed by: bz@
Sponsored by: Wheel Sp. z o.o. (http://www.wheel.pl)
request to arrive. Previously it would end up returning as soon as the
request length stored in the first two bytes had arrived.
Reviewed by: dwmalone
MFC after: 1 week
be named "udp_inpcb" to avoid a naming conflict with tcp[1].
For consistency rename the uma zone for TCP from "inpcb" to "tcp_inpcb".
Found by: rwatson [1]
Discussed with: rwatson
So far the udp_tun_func_t had been (ab)using inp_ppcb for udp in kernel
tunneling callbacks. Move that into the udpcb and add a field for flags
there to be used by upcoming changes instead of sticking udp only flags
into in_pcb flags2.
Bump __FreeBSD_version for ports to detect it and because of vnet* struct
size changes.
Submitted by: jhb (7.x version)
Reviewed by: rwatson
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.
The kernel option is left for a transition period, marked deprecated,
and will be removed soon.
Initially requested by: phk (1 year 1 day ago)
MFC after: 4 weeks
because struct vnet_net holds the rt_tables[][] for MRT and array size
is compile time dependent. If you had ROUTETABLES set to >1 after
r192011 V_loif was pointing into nonsense leading to strange results
or even panics for some people.
Reviewed by: mz
last year or two's work on routing:
- Combine iproute initialization and flowtable lookup blocks, eliminating
unnecessary tests for known-zero'd iproute fields.
- Add a comment indicating (a) why the route entry returned by the
flowtable is considered stable and (b) that the flowtable lookup must
occur after the setup of the mbuf flow ID.
- Assert the inpcb lock before any use of inpcb fields.
Reviewed by: kmacy
route is also being deleted, the link-layer address table
(arp or nd6) will flush those L2 llinfo entries that match
the removed prefix.
Reviewed by: kmacy
net.inet.ip.fw.one_pass is a classic ip_input.c variable and is used in
the pfil and bridge code as well. As ipfw is loadable we need to always
provide it. That is the reason why it lives in struct vnet_inet and
not in struct vnet_ipfw.
to a non loopback/ppp link types) through the loopback interface. Prior
to the new L2/L3 rewrite, this host route is implicitly added by the L2
code during RTM_RESOLVE of that interface address. This host route is
deleted when that interface is removed.
Reviewed by: kmacy
'net.inet.ip.fw.default_to_accept'. The current value can also be queried
via a read-only sysctl of the same name.
Requested by: plosher
MFC after: 1 week
(i.e. seems to be) already set.
This should reduce console noise due to curvnet recursion reports.
This change has no impact on nooptions VIMAGE builds.
Approved by: julian (mentor)
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:
1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:
options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet
2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:
INIT_VNET_NET(ifp->if_vnet); becomes
struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];
3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.
4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.
5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.
6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.
Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.
Reviewed by: bz, rwatson
Approved by: julian (mentor)
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
incorrectly output, if the RB-tree enumeration happened to reuse the
same chain for a mode switch: that is, both ALLOW and BLOCK records
were appended for the same group, in the same mbuf packet chain.
This was introduced during an mbuf chain layout bug fix involving
m_getptr(), which obviously cannot count from offset 0 on the
second pass through the RB-tree when serializing the IGMPv3
group records into the pending mbuf chain.
Cut over to KTR_INET for IGMPv3 CTR usage.
processed by ipfw once - avoid second ipfw_chk() call.
This saves us from unnecessary IPFW_RLOCK(), m_tag_find() calls and
ip/tcp/udp header parsing.
MFC after: 2 month
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.
Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)
(colloquially known as if_addrlist). Currently not acquired around
interface address loops that call out to the routing code due to
potential lock order issues.
MFC after: 3 weeks
lookup of 'ia' from if_addrhead through most use. Note that we
currently have to drop it prematurely in some cases due to calls out to
the routing and interface code while using 'ia', but this closes many
races. Annotate several potential races that persist after this change.
Move to using M_NOWAIT for allocating new interface addresses due to
lock(s) being held.
MFC after: 3 weeks
of the implementation of ioctls. This makes the mapping of ioctls to
specific privileges more explicit, and also simplifies the
implementation by reducing the use of FALLTHROUGH handling in switch.
While this is not intended to be a functional change, it does mean
that certain privilege checks are now performed earlier, so EPERM
might be returned in preference to EADDRNOTAVAIL for management
ioctls that could have failed for both reasons.
MFC after: 3 weeks
that it is easier to lock:
- Handle the unsupported ioctl case at the beginning of in_control(),
handing off to ifp->if_ioctl, rather than looking up interfaces and
addresses unnecessarily in this case.
- Make it an invariant that ifp is always non-NULL when running
in_control()-implemented ioctls, simplifying the code structure.
MFC after: 3 weeks
Match the bracketing in netstat.
Since the cleanup of MROUTING, ports have broken because they
expect to include <netinet/ip_mroute.h> without including
<sys/queue.h>. Fix breakage at source.
The real fix, of course, is to fix the MROUTING APIs by blowing them
away and replacing them with something else...
variable. Acquire the interface address list lock when iterating over
the interface address list searching for a matching received broadcast
address.
MFC after: 2 weeks
we recognize its a retransmit, ahead of the PR-SCTP
work. Without this fix, we end up NOT reducing flight
size and causing an miscalculation when PR-SCTP is active
and data is skipped.
Obtained from: Michael Tuexen.
and CARPSTATS_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the implementation
of these statistics, such as using per-CPU versions of the data
structure.
MFC after: 3 days
and PIMSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
and MRTSTAT_INC(), rather than directly manipulating the fields of
the structure. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structure.
MFC after: 3 days
IGMPSTAT_ADD() and IGMPSTAT_INC(), rather than directly
manipulating the fields of the structure. This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.
MFC after: 3 days
macros: ICMPSTAT_ADD(), ICMPSTAT_INC(), ICMP6STAT_ADD(), and
ICMP6STAT_INC(), rather than directly manipulating the fields
of these structures across the kernel. This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.
In on case, icmp6stat members are manipulated indirectly, by
icmp6_errcount(), and this will require further work to fix
for per-CPU stats.
MFC after: 3 days
and UDPSTAT_INC(), rather than directly manipulating the fields
across the kernel. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structures.
MFC after: 3 days
IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly
manipulating the fields across the kernel. This will make it easier
to change the implementation of these statistics, such as using
per-CPU versions of the data structures.
MFC after: 3 days
TCPSTAT_INC(), rather than directly manipulating the fields across the
kernel. This will make it easier to change the implementation of
these statistics, such as using per-CPU versions of the data structures.
MFC after: 3 days
-UdpAliasIn(): correctly check return code after modules ran.
-alias_nbt: in case of malformed packets (or some other unrecoverable
error), toss the packet.
dependency tracking and ordering enforcement.
With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.
The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.
The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.
For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.
A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.
Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.
The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.
Reviewed by: bz
Approved by: julian (mentor)
types of MAC overheads such as preambles, link level retransmissions
and more.
Note- this commit changes the userland/kernel ABI for pipes
(but not for ordinary firewall rules) so you need to rebuild
kernel and /sbin/ipfw to use dummynet features.
Please check the manpage for details on the new feature.
The MFC would be trivial but it breaks the ABI, so it will
be postponed until after 7.2 is released.
Interested users are welcome to apply the patch manually
to their RELENG_7 tree.
Work supported by the European Commission, Projects Onelab and
Onelab2 (contract 224263).
more adequate TCP performance with IPv6.
Changes for IPv4, r166403 and r172795, both ignored the
IPv6 counterpart and left it in the state of art of year 2000.
The same logic in syncache already shares code between v4 and v6 so
things do not need to be adapted there.
Reported by: Steinar Haug (sthaug nethelp.no)
Tested by: Steinar Haug (sthaug nethelp.no)
MFC after: 3 days
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
in the case where a single mbuf is allocated due to
m_getcl() returning NULL, we already call MH_ALIGN,
so do not increment m->m_data in this case.
Found during MLDv2 port.
- PR-SCTP had major issues when skipping through a multi-part message.
o Did not look at socket buffer.
o Did not properly handle the reassmebly queue.
o The MARKED segments could interfere and un-skip a chunk causing
a problem with the proper FWD-TSN.
o No FR of FWD-TSN's was being done.
- NR-Sack code was basically disabled. It needed fixes that
never got into the real code.
- CMT code had issues when the two paths were NOT the same b/w. We
found a few small bugs, but also the critcal one here was not
dividing the rwnd amongst the paths.
Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
they were passed uninitialized to in6_pcblookup_hash. Instead, do as is done
for IPv4 and use the addresses within the sockaddr structure, which are
correctly populated.
This fixes tcpdrop(8) for IPv6 address pairs.
Reviewed by: bz
This is purely a forwarding plane cleanup; no control plane
code is involved.
Summary:
* Split IPv4 and IPv6 MROUTING support. The static compile-time
kernel option remains the same, however, the modules may now
be built for IPv4 and IPv6 separately as ip_mroute_mod and
ip6_mroute_mod.
* Clean up the IPv4 multicast forwarding code to use BSD queue
and hash table constructs. Don't build our own timer abstractions
when ratecheck() and timevalclear() etc will do.
* Expose the multicast forwarding cache (MFC) and virtual interface
table (VIF) as sysctls, to reduce netstat's dependence on libkvm
for this information for running kernels.
* bandwidth meters however still require libkvm.
* Make the MFC hash table size a boot/load-time tunable ULONG,
net.inet.ip.mfchashsize (defaults to 256).
* Remove unused members from struct vif and struct mfc.
* Kill RSVP support, as no current RSVP implementation uses it.
These stubs could be moved to raw_ip.c.
* Don't share locks or initialization between IPv4 and IPv6.
* Don't use a static struct route_in6 in ip6_mroute.c.
The v6 code is still using a cached struct route_in6, this is
moved to mif6 for the time being.
* More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c.
v4 path tested using ports/net/mcast-tools.
v6 changes are mostly mechanical locking and *have not* been tested.
As these changes partially break some kernel ABIs, they will not
be MFCed. There is a lot more work to be done here.
Reviewed by: Pavlin Radoslavov
any IPv4 multicast operations which reference it.
There is a potential race because ifma_protospec is set to NULL
when we discover the underlying ifnet has gone away. This write
is not covered by the IF_ADDR_LOCK, and it's difficult to widen
its scope without making it a recursive lock. It isn't clear why
this manifests more quickly with 802.11 interfaces, but does not
seem to manifest at all with wired interfaces.
With this change, the 802.11 related panics reported by sam@
and cokane@ should go away. It is not the right fix, that requires
more thought before 8.0.
Idea from: sam
Tested by: cokane
in FreeBSD 5.x to allow network device drivers to run with Giant
despite the network stack being Giant-free. This significantly
simplifies calls into ioctl() on network interfaces, especially
in the multicast code, as well as eliminates deferred invocation
of interface if_start routines.
Disable the build on device drivers still depending on
IFF_NEEDSGIANT as they no longer compile. They will be removed
in a few weeks if they haven't been made MPSAFE in that time.
Disabled drivers:
if_ar
if_axe
if_aue
if_cdce
if_cue
if_kue
if_ray
if_rue
if_rum
if_sr
if_udav
if_ural
if_zyd
Drivers that were already disabled because of tty changes:
if_ppp
if_sl
Discussed on: arch@
certain flags that should have been in inp_flags ended up in inp_vflag,
meaning that they were inconsistently locked, and in one case,
interpreted. Move the following flags from inp_vflag to gaps in the
inp_flags space (and clean up the inp_flags constants to make gaps
more obvious to future takers):
INP_TIMEWAIT
INP_SOCKREF
INP_ONESBCAST
INP_DROPPED
Some aspects of this change have no effect on kernel ABI at all, as these
are UDP/TCP/IP-internal uses; however, netstat and sockstat detect
INP_TIMEWAIT when listing TCP sockets, so any MFC will need to take this
into account.
MFC after: 1 week (or after dependencies are MFC'd)
Reviewed by: bz
