the system to make use of USB device mode / USB OTG to provide a "virtual
serial port" on release images.
Reviewed by: gjb@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15602
than $4. Introduce $BASEBITSDIR for clarity and to avoid repeating this
mistake in the future. Fixing this ensures that we pick up newly built
boot bits native to the target rather for/from the host.
- Apply some of the argument quoting fixes done in r287635 but missing in
later revisions.
A good number of BIOSes have trouble booting from GPT in non-UEFI mode.
This is commonly reported with Lenovo desktops and laptops (including
X220, X230, T430, and E31) and Dell systems. Although UEFI is the
preferred amd64 boot method on recent hardware, older hardware does not
support UEFI, a user may wish to boot via BIOS/CSM, and some systems
that support UEFI fail to boot FreeBSD via UEFI (such as an old
AMD FX-6100 that I have).
With this change amd64 memsticks remain dual-mode (booting from either
UEFI or CSM); the partitioning type is just switched from GPT to MBR.
The "vestigial swap partition" in the GPT scheme was added in r265017 to
work around some issue with loader's GPT support, so we should not need
it when using MBR.
There is some concern that future UEFI systems may not boot from MBR,
but I am not aware of any today. In any case the likely path forward
for our installers is to migrate to CD/USB combo images, and if it
becomes necessary introduce a separate memstick specifically for the
MBR BIOS/CSM case.
PR: 227954
Reviewed by: gjb, imp, tsoome
MFC after: 3 days
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15599
switch the default kldxref_enable to YES.
The reason is that it's required for every image that's being cross-built,
as kldxref(8) cannot handle files for non-native architectures. For the
one that is not - amd64 - having it on by default doesn't change anything;
the script is noop if the linker.hints already exists.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
boot1.efi have some trouble to read MBR partitions, it needs them to be
aligned a certain way while loader.efi can cope with them either way.
We want to switch to loader.efi as the main efi loader everywhere, it seems
that arm64 using MBR partition will be the guinea pig.
Tested On: RPI3, Pine64
Reviewed by: imp
Approved by: gjb
RPI* 32bits and RPI* 64bits have a different config.txt
Copy to correct config.txt to the fat partition of the release image.
Also copy pwm.dtbo as some people want to use it.
Reviewed by: gjb
r332674 raised the size of the FAT partition from 2MB to 41MB for some
boards. But we format them in FAT12 and this size appears to be to big
for FAT12 and some SoC bootrom cannot cope with that.
Format the msdosfs partition as FAT16,
PR: 228285
MFC after: soon
the /boot/kernel/linker.hints file, which breaks loading some of the modules
with dependencies, eg cfiscsi.ko.
This is a minimal fix for ARM images, in order to safely MFC it before
11.2-RELEASE. Afterwards, however, I believe we should actually just change
the default (as in, etc/defaults/rc.conf). The reason is that it's required
for every image that's being cross-built, as kldxref(1) cannot handle files
for non-native architectures. For the one that is not - amd64 - having it
on by default doesn't change anything - the script is noop if the linker.hints
already exists.
The long-term solution would be to rewrite kldxref(1) to handle other
architectures, and generate linker.hints at build time.
Reviewed by: gjb@
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14534
will include license metadata in the resultant GCE image.
GCE_LICENSE is unset by default, as it primarily pertains to images
produced by the FreeBSD Project, but for downstream FreeBSD consumers,
it can be set in the make(1) environment in the format of:
--licenses="projects/PROJECT_ID/global/licenses/LICENSE_NAME"
The "license" is not a license, per se, but required metadata that
is required by the GCE marketplace. For the FreeBSD Project, the
license name is simply 'freebsd', with the description of 'FreeBSD'.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
satisfying a requirement to allow FreeBSD to be considered
a top-tier supported OS in Google Compute Engine.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Recent changes to makefs and mkimg have led to situations where the
disconnect between this script and the versions installed on the host cause
failures. Provide a way to work around this that doesn't require the
installation of new versions to the host system if that's not desired.
With this change mkisoimages.sh will honour the $ETDUMP, $MAKEFS and $MKIMG
environment variables but fall back to the previous behaviour of finding them
within $PATH.
Reviewed by: gjb
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15181
current size may not be sufficiently large for development and/or
testing.
PR: 227548
Submitted by: trasz
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
EC2 instances from sysctl.conf to loader.conf; these can all be set as
loader tunables, and setting them in loader.conf gives us the right
behaviour in the event of a kernel panic taking place prior to when
sysctl.conf is processed.
MFC after: 1 week
This keeps the existing El Torito entries for BIOS and UEFI boot code and
adds a GPT in the ISO image's System Area containing boot code for BIOS that
will load /boot/loader from the ISO filesystem and execute it. We then use
etdump to find the EFI System Partition image in the El Torito catalog and
add an entry to the GPT that allows EFI to find it.
Reviewed by: gjb, imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15051
Some BIOSes have trouble booting from GPT in non-UEFI mode. This is
commonly reported with Lenovo laptops, including my x220. As we do not
currently support booting FreeBSD/i386 via UEFI there's no reason to
prefer GPT.
The "vestigial swap partition" was added in r265017 to work around an
issue with loader's GPT support, so we should not need it when using
MBR.
We may want to make the same change to amd64, although the issue there is
mitigated by such systems booting via UEFI in the common case.
PR: 227422
Reviewed by: gjb
MFC after: 3 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This makes it easier to identify the individual partition types and
facilitates comparisons across architectures.
Reviewed by: gjb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
have moved from the u-boot-rpi3 share directory to the default
rpi-firmware share directory. Remove the files from UBOOT_FILES
and append the DTB file to a DTB_FILES list so the correct path
is used, fixing a build failure.
Sponsored by: The FreeBSD Foundation
This allows for GCE consumers to easily detect the latest major
version of FreeBSD when using the gcloud command line utility.
To ensure snapshot builds do not conflict with release-style
builds (ALPHA, BETA, RC, RELEASE), the '-snap' suffix is appended
to the GCE image family name.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Latest u-boot update need u-boot script to load and start ubldr.
(See D14230 for more details)
Copy this file for our arm release on the fat partition.
Approved by: gjb
UEFI booting requires an EFI System Partition (ESP). On most storage devices
this will be in a specific partition type. To allow booting from CD/ISO
filesystems, UEFI will look for an ESP in the form of a FAT filesystem image
embedded in the image. Historically FreeBSD has added one of these to its
amd64 ISO images but marked it as simply another i386 boot image. Luckily for
us most UEFI implementations are rather forgiving and work this out for us.
This change adds the ability to mark a boot image as being a UEFI image. It
also modifies our ISO generation to use this marking for the UEFI image we
embed.
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: emaste, imp
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14809
kernel.ucl uses a hardcoded boot/kernel for kldxref, which is the incorrect
directory when we're installing extra kernels that aren't the "default"
kernel (placed at boot/kernel).
Fix this by instead using a new %KERNELDIR% that we now replace in
Makefile.inc1 with "kernel" for the default kernel and "kernel.${_kernel}"
for these extra kernels so that, e.g. /boot/kernel.SHIVA, will get properly
kldxref'd upon update and avoid outdated linker.hints.
Reviewed by: gjb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14689
providing more space for a local buildworld to succeed without
attaching separate disks for /usr/src and /usr/obj.
Reported by: mckusick
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The Pine64 root filesystem was incorrectly created directly on the MBR
partition. This can cause the loader to get confused when loading the
kernel from this filesystem.
The loader will see this as a small partition meaning later checks to
ensure it doesn't read past the end of the disk incorrectly report a
failure. This seems to work mostly by accident with the released images as
they are smaller than the reported size, however after growfs has run the
image may no longer boot.
Reviewed by: gjb, emaste, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14343
within the CHROOTDIR. If it does not exist, unset CHROOTBUILD_SKIP
to prevent build failures.
Requested by: swills
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Since Amazon provides NTP servers within their network, this should
be far superior to using the default NTP pools; and since the service
is provided by Amazon there's very little risk in enabling it by
default. (If someone is able to compromise Amazon's NTP servers and
exploit them to attack EC2 instances, they would almost certainly be
able to compromise EC2 instances even without ntpd running...)
MFC after: 1 week
Relnotes: EC2 instances now keep their clocks synchronized using
the Amazon Time Sync Service (aka. NTP).
EC2 instances are normally launched with an SSH public key specified,
which is then used for logging in (by default, as 'ec2-user'). Having
ChallengeResponseAuthentication enabled (as FreeBSD's default sshd_config
does) has no functional effect in a new EC2 instance, since you can't log
in using a password until a password has been set -- but having this
enabled results in alerts from automated scanning tools which can detect
that sshd advertises support for keyboard-interactive logins (since they
can't detect that accounts have no password set).
EC2 users who want to use passwords to log in to their instances will need
to set 'ChallengeResponseAuthentication yes' in FreeBSD 12.0 and later.
Discussed with: gjb, gtetlow, emaste, des
Requested by: Amazon
X-MFC: No
Relnotes: ChallengeResponseAuthentication is turned off by default in
Amazon EC2 AMIs.
EMBEDDEDPORTS. [1]
Remove and update stale documentation from release(7) while here.
PR: 206344 [1]
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
chroot(8) to avoid mtime changes within the ports checkout,
which can cause checksum differences.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
copied from the build host. It is renamed to /etc/resolv.conf.bak
on boot, so never used anyway.
Noticed by: peter
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
not already exist within ${CHROOTDIR}. This allows re-using a build
chroot with CHROOTBUILD_SKIP set to a non-empty value and CHROOTDIR
set to '/' in release.conf.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The u-boot port for RPI-2 was updated to use u-boot-master, this cause
an update in u-boot version to v2017.09 and changing the filename.
The various firmware files for the RPI* are now in a common ports
sysutils/rpi-firmware as they are shared on all the RPI version.
Update the release files to copy the right files from the right location.
Reviewed by: gjb
MFC after: 3 days
THe u-boot port for RPI-B was updated to use u-boot-master, this cause
an update in u-boot version to v2017.09 and changing the filename.
The various firmware files for the RPI* are now in a common ports
sysutils/rpi-firmware as they are shared on all the RPI version.
Update the release files to copy the right files from the right location.
Reviewed by: gjb
MFC after: 3 days
Update the TARGET/TARGET_ARCH matching in release/release.sh and
release/Makefile.mirrors for simplification.
Discussed with: mmel
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ubldr is the non-pie version of ubldr.bin, do not install two
copies of the same binary. This will allow us to remove ubldr
in the future.
All the u-boot ports know how to load ubldr.bin
Reviewed by: gjb (earlier version)
make(1) invocations following the OBJDIR restructuring to
ensure the output arm SoC image is in the correct directory.
Sponsored by: The FreeBSD Foundation
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
immediately available on instances which are running without internet
access (or which can't rely on firstboot_pkgs to install it for some
other reason).
Note that this agent is not enabled by default; to enable it, add
amazon_ssm_agent_enable="YES" to /etc/rc.conf, e.g., by placing the lines
>>/etc/rc.conf
amazon_ssm_agent_enable="YES"
into the EC2 user-data. In addition to being enabled, the agent requires
keys to be provided via IAM Roles; users are encouraged to be very careful
in using this functionality due to the inherent vulnerability in the idea
of providing credentials via a service accessible to any process which can
open an HTTP connection.
Requested by: Amazon
No objection from: re@
Relnotes: FreeBSD/EC2 AMIs now include the Amazon EC2 Systems Manager
(SSM) Agent.
A recent bug in security/sudo causes segmentation faults when
the system is not configured with a hostname, which causes issues
with some virtual machine setups, notably Vagrant. Set the default
hostname to the output of 'uname -o'.
Submitted by: Nicholas Fiorentini
Sponsored by: The FreeBSD Foundation
The original change was dealing with the build wanting to run a newer
install(1) that was not yet installed. The solution to look into the private
legacy directory of the existing build conflicts with 2 upcoming features: a
changed OBJDIR format, and splitting the host tools into arch-dependent and
arch-independent directories. Rather than hardcoding and changing the paths in
this script, just let kernel-toolchain do the work, while disabling much of the
meat. With -j15 this finishes in 25 seconds for me and 117 seconds with -j1.
All that is really needed is bootstrap-tools, but the system is not currently
written in a way that all previous dependent steps will have ran. The previous
steps, such as _worldtmp, are being reworked and renamed and so cannot be
relied upon to be right.
Sponsored by: Dell EMC Isilon
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
build on arm/armv6 images.
Pointyhat: gjb (myself)
MFC after: immediate
MFC note: releng/10.4 has broken because of this
Sponsored by: The FreeBSD Foundation
virtual machine images and embedded images, similar to what is
done when extracting base.txz to the target root filesystem in
an new installation.
Noticed by: marius
Tested with: head@r323729
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
There's not much practical difference as far as install media is
concerned but newfs creates UFSv2 by default and it is sensible to use
the contemporary UFS version.
I also intend to change makefs to create UFSv2 by default (to match
newfs) so we'll want make-memstick.sh to be explicit, rather than
relying on the host tool's default.
Reviewed by: andrew, gjb, jhibbits
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12231
This Makefile relies on Makefile.fat providing the correct value for
BOOT1_MAXSIZE and BOOT1_OFFSET. Since BOOT1_OFFSET had no default value
here the build would already fail if Makefile.fat did not provide
correct values.
Sponsored by: The FreeBSD Foundation
Also remove the now-redundant error handling that was only for makefs.
This change applies arm64's r308171 to the other make-memstick.sh
versions.
Reviewed by: gjb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12195
Engine (GCE) images with an updated version of Google's tools.
PR: 221714
Submitted by: helen _dot_ koike _@_ collabora_dot_com (original)
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Disconnect the dependency on the kernel package from the runtime
package. There are a number of problems here:
1) The runtime package installed into a chroot or a jail would
include the kernel package, changing the behavior of how jails
work now [1];
2) As result of (1), it is possible a binary may incorrectly
resolve kernel symbols [2]; in addition, it is possible there
will be unexpected fallout with 32-bit jails on a 64-bit host
kernel [2].
Noticed by: brd [1]
Discussed with: kib [2]
MFC after: 3 days
MFC note: record-only to wipe from the merge tracker
Sponsored by: The FreeBSD Foundation
svnversion metadata to the runtime and kernel packages.
Instead of traversing src/sys, as is done by newvers.sh for uname(1),
a full tree walk is done to prevent userland and/or modifications
from not being reflected in a modified tree (M).
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Use PPID and PID to kill off the pre-install and parent pkg(8)
processes unless 'Y' or 'y' are entered at the prompt if the user
wants to proceed with upgrading the kernel and userland at the same
time.
This restores some of the logic and intent of r322327, with the
caveat of printing "child process terminated unexpectedly."
MFC after: 5 days
MFC with: r322327, r322352
Sponsored by: The FreeBSD Foundation
It appears I misunderstand process forking and signal handling in
how the pre-/post-install scripts are executed internally by pkg(8).
In some cases (not all), ^C when prompted to cancel the kernel
package update will stop the pre-install script from executing, but
allow pkg(8) to continue extracting the package when it is not the
intent.
In order to keep somewhat of an anti-footshooting measure in place,
print the recommendation to install the kernel package first if
ASSUME_ALWAYS_YES is false and TERM is set, then sleep for 5 seconds
to allow the user to see the message.
MFC after: 5 days
MFC with: r322327
X-MFC-Note: Maybe not until I am happy with this..
Sponsored by: The FreeBSD Foundation
The idea here is that, provided upstream pkg(8) maintainers accept
the proposed change, the kernel.ucl will contain a post-install
script causing pkg(8) to emit a message informing to reboot the
system after the kernel is upgraded using 'pkg upgrade', so the
new userland is installed on the running new kernel. At present,
this functionality does not exist in pkg(8), but will help ensure
the upgrade path follows that from UPDATING. To work around this
for now, evaluate ASSUME_ALWAYS_YES, and prompt the user if they
wish to proceed if not set to true.
Since there is a kernel dependency, and a non-GENERIC kernel may
be in use, update Makefile.inc1 to replace '%KERNCONF%' in the
runtime.ucl with the first-built kernel set either via command line
or in make.conf(5).
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
- Update ATLAS_UPLOAD_URL to avoid various regular expressions
from failing to match due to redirections.
- Use ATLAS_UPLOAD_URL throughout the script.
- Adjust several regular expression patterns.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
- Rename chroot_arm_armv6_build_release() to chroot_arm_build_release()
and make it hardware agnostic (such as armv6 -vs- armv7 -vs- arm64).
- Evaluate EMBEDDED_TARGET differently so release/tools/arm.subr can
be used for arm/armv6 and arm64/aarch64.
- Update comments and copyright.
In release/tools/arm.subr:
- In arm_create_disk(), change the default alignment from 63 to 512k,
fixing a boot issue on arm64 and EFI. [1]
- Update comments and copyright.
Add a RPI3 configuration file, pieces obtained from Crochet.
Obtained from: Crochet [1]
MFC after: 5 days
X-MFC-Note: maybe
Sponsored by: The FreeBSD Foundation
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
otherwise with 'CLOUDWARE=vagrant-virtualbox', the path to the
configuration file may be incorrect.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
made recently by Atlas Hashicorp. The data returned from GET and
POST requests has changed, which caused a number of regex patterns
to fail to be properly identified as 'success' or 'failure', which
ended up in upload/publish failures.
Tested with: 12-CURRENT
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
to 1.5G.
- Use the 'conv=sync' dd(1) option to fix writing the u-boot.imx
file to the md(4) device for IMX6-based boards.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
install to prepare an AMI image. This can be used to create a ZFS AMI disk
image using a virtual machine.
Change ec2.conf to use the pkg tool from a chroot rather than trying to
bootstrap it and fail from the livecd readonly filesystem.
Reviewed by: gjb
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
- Speeds up the boot process by disabling sendmail.
- Allows an user to ssh as root with a public key.
- Make ssh(1) respond faster by disabling DNS lookups.
- Enable DHCP on the vtnet(4) interface.
Note: The CLOUDWARE list has not yet been changed to include the
OpenStack target by default yet.
Submitted by: Diego Casati
PR: 215258
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
During the upgrade of clang/llvm etc to 3.9.0 in r309124, the PACKAGE
directive in the usr.bin/clang/*.mk files got dropped accidentally.
Restore it, with a few minor changes and additions:
* Correct license in clang.ucl to NCSA
* Add PACKAGE=clang for clang and most of the "ll" tools
* Put lldb in its own package
* Put lld in its own package
Reviewed by: gjb, jmallett
X-MFC-With: 309124
Differential Revision: https://reviews.freebsd.org/D8666
The default pkg(8) from pkg.freebsd.org requires libjail.so,
so mark the jail package as vital along with the runtime
package to avoid errors when libjail.so is removed. This is
a no-op for systems with WITHOUT_JAIL in src.conf(5) and pkg(8)
built from the Ports Collection.
In order to make this work without marking packages such as
the jail-lib32, for example, the jail.ucl file needed to be
split out into separate files similarly to the runtime-*.ucl
files.
Glanced at by: brd
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Also remove the now-redundant error handling that was only for makefs.
This script was run on an older FreeBSD host that lacked efi-on-mbr
support in makefs. A warning was emitted on the console (from makefs)
but the script continued running and exited with 0.
Reviewed by: gjb
Sponsored by: The FreeBSD Foundation
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
targets, similar to what is done for the run-autotools-fixup
override for non-arm targets.
MFC after: 3 days
Tested on: 12-CURRENT building 10-STABLE
Sponsored by: The FreeBSD Foundation
Notably, this removes the toolchain from the CD-ROM image (it remains on DVD
images) and pushes the CD-ROM image well below the 700 MB mark.
MFC after: 10 days
running on EC2. Due to improvements in EC2, the performance penalty which
was present on some EC2 instances no longer exists, and enabling this
feature now consistently yields ~20% higher throughput with equal or lower
latency.
Reverts: r286063
Approved by: re (gjb)
MFC after: 2 weeks
Relnotes: Improved disk throughput on EC2
30m isn't enough for pkg anymore to extract packagesite.txz.
40m is fine for now but let's take a safer way as we don't know when pkg will need more.
Reported by: many
Approved by: re (gjb), andrew (mentor)
avoid environment pollution problems. That port uses <bsd.prog.mk> but
is not compatible with the latest mk bits in HEAD.
Reported by: gjb
No rush, but make sure it's in the tree before tomorrow by: gjb
it's defined, installation image is shipped without source distribution
(src.txz)
Add the hability of defining NOSRC in release.conf and pass it to
'make release' argument
Approved by: gjb
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D6710
on performance, especially with SD cards on certain SoCs.
Requested by: trasz
Discussed with: ian, kientzle
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
All operations are performed on the original output file,
and nothing is ever done with the copied file (as in, no
modifications and/or publication from the copied file).
Sponsored by: The FreeBSD Foundation
This was reported to not work as expected, and feedback
following the report was never received. In addition, we
do not publish these anywhere publicly.
The configuration file is not (yet) removed, in hopes that
the remaining details on the original issues can be resolved,
and we can publish the resulting images in the future.
Sponsored by: The FreeBSD Foundation
Microsoft has graciously overtaken publication of FreeBSD
on Azure since 10.3-RELEASE.
Many thanks to Microsoft for their support of FreeBSD on
Azure.
The configuration file and Makefile.azure are not (yet)
planned to be removed, as they may be useful in the future.
Sponsored by: The FreeBSD Foundation
it is expected in pkg-1.8.0, which will cause 'pkg del -afy' to not
destroy a system by forcefully removing everything.
As there are valid use cases for doing such (test jails, for example),
it will be overrideable.
In addition, ensure /dev and /tmp exist, as /dev is not created by
default currently, and pkg(8) requires /tmp to exist, which is also
not created by default.
This needs to be moved to the clibs package, since runtime depends on
that package, however I need to first verify that it will work as it
is expected.
Sponsored by: The FreeBSD Foundation
architectures we do not provide upstream pkg(8) packages.
This is not tied to anything as-is, and likely will break
your system if used (based on experience with testing with
powerpc).
There is an overwhelming amount of evil happening here,
so until the issues are fixed, it will not be tied into the
'packages' target.
Sponsored by: The FreeBSD Foundation
the constraints on what needs to be installed in a specific to
maintain consistency during upgrades.
Create a new clibs package containing libraries that are needed
as a bare minimum for consistency.
With much help and input from: kib
Sponsored by: The FreeBSD Foundation
libedit is needed for sh(1), which if updated before runtime,
can cause undesirable behavior.
For the rest, the installation order needs to be:
1) librtld
2) libc
3) libthr
The dependency listing and shilbs_required entries ensure this
behavior.
Sponsored by: The FreeBSD Foundation
One of the major pain points with how this was implemented
is the requirement of in-tree, hard-coded <name>.ucl, as
well as <name>-<suffix>.ucl where <suffix> can be lib32,
profile, development, debug, or any combination of the four.
This created significant overhead when adding new packages
and any of the files in any of the combinations were missing.
Instead of test(1)-ing if the <packagename>.ucl file exists,
hand off to a script to figure out what the final ucl file
name should be before invoking pkg(8).
The default behavior is 'template.ucl' is used as a fallback.
This affects only the userland packages, as the kernel code
is already smart enough to handle these variations.
Sponsored by: The FreeBSD Foundation
with -DNO_ROOT to create the METALOG mtree(8) file.
Separate the default STAGEDIR for world (WSTAGEDIR) and kernel
(KSTAGEDIR).
Fix the 'create-kernel-packages' target to work properly.
Evaluate if 'kernel' is set when invoking mtree-to-plist.awk,
which splits the kernel and kernel.debug into separate plist
files.
Fix METALOG creation when building/packaging multiple kernels.
Sponsored by: The FreeBSD Foundation
