options. Bump the version number to 20140927.
While here, use explicit fputc() calls to skip a line in the output.
This to avoid having to hunt for extra '\n' characters in the printf
format strings.
MFC after: 1 week
Relnotes: yes
--version print the version of mkimg and also whether it's
64- or 32-bit.
--formats list the supported output formats separated by space.
--schemes list the supported partitioning schemes separated by
space.
Inspired by a patch from: gjb@
MFC after: 1 week
Relnotes: yes
We have a different ordering for the RC block(s) and L2 tables.
This is expected to be a non-issue, because everything is found
through file offsets in the corresponding RC table and L1 table.
Files that grow organically have RC blocks and L2 tables scattered
all over the place anyway.
The reason for the difference is that mkimg needs to be able to
write to a pipe. We can't seek forward and backward to fill in
the bits in non-sequential order.
variable was assigned the image offset in bytes and not in blocks
(i.e. sectors). This had image_data() return FALSE, which meant that
we didn't assign a cluster when we needed and also meant that we
didn't write parts of the L2 table when we should have. The result
being that the actual data clusters were written at the wrong offset.
Improve support for QCOW version 2. We're having the right layout
and even know how many refcnt blocks we need. All we need to do is
populate the refcnt blocks for every cluster we write and allocate
a cluster when we need a new refcnt block. The allocation part is
tricky in that it'll interleave with the assignment of clusters to
L2 tables and data. Since version 2 is not quite done, keep it
compiled out for now.
Since the code stats and mkdirs in 2 separate steps, it is possible that
the directory will be created in the meantime by something else (e.g.
concurrent install).[1]
While here alter the code to properly report stat failure, previously it
would always claim it was mkdir which failed.
Noted by: royger [1]
MFC after: 1 week
trying to get the test name right, failed, gave up and used a sequence
number instead. When I realized it wasn't because of the number of
underscores in the name that I really started to think. I didn't have
braces around the variable names ...
Thus: test_1 is now called apm_1x1_512_qcow, which gives you all you
need to run mkimg by hand.
Dumb-ass: marcel
to the baseline. Since we don't run gzip with the -n option, the output
of gzip varies for identical result files if and when they are created
at different time. Ouch...
Rather than add -n and commit a 600K+ diff for the changes to all the .uu
files, it's less of a churn to uudecode and gunzip the baseline file and
compare that to the new result file to determine if the baseline file
needs to be updated.
This way, "atf-sh mkimg.sh rebase" can be run as many times as people like
and a subsequent "svn status" will not show unnecessary diffs.
And because of that, it's entirely disabled for now. Both versions
are similar enough that a single header definition works for both
of them. The only "diverting" side-effect is that the union of the
two is larger than the official V1 header.
What this means for our V1 support is that we can't put the L1 table
adjacent to the V1 header (i.e. at offset 0x30 in the file), unless
we revert to hackery and klugery. Let's not. Instead, we align the L1
table at the cluster boundary. This is in line with the V2 layout and
perfectly ok for V1 anyway (ok -- as far as I've seen so far).
Due to the alignment, our V1 image seems to be 1 cluster larger than
the V1 image created by qemu-img (on average).
Compression of the clusters is not supported at this time.
MFC after: 2 months
-T (track size) or -H (number of heads) is given:
o scheme_metadata() always rounded to the block size. This is not
always valid (e.g. vtoc8 that must have partitions start at cylinder
boundaries).
o The bsd and vtoc8 schemes "resized" the image to make it match the
geometry, but since the geometry is an approximation and the size
of the image computed from cylinders * heads * sectors is always
smaller than the original image size, the partition information ran
out of bounds.
The fix is to have scheme_metadata() simply pass it's arguments to the
per-scheme metadata callback, so that schemes not only know where the
metadata is to go, but also what the current block address is. It's now
up to the per-scheme callback to reserve room for metadata and to make
sure alignment and rounding is applied.
The BSD scheme now has the most elaborate alignment and rounding. Just
to make the point: partitions are aligned on block boundaries, but the
image is rounded to the next cyclinder boundary.
vtoc8 now properly has all partitions aligned (and rounded) to the
cyclinder boundary.
Obtained from: Juniper Networks, Inc.
MFC after: 3 days
Makefiles should not assume that source files can be overwritten. This is the
common case for Perforce source trees.
This is a followup commit to r211243 in the same vein.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
numbers or names. This gives more control over the actual layout and
helps to construct BSD disklabels with /usr or /var at dedicated
partitions.
Obtained from: Juniper Networks, Inc.
MFC after: 3 days
Relnotes: yes
the second sector by only clearing the amount of bytes needed for the
disklabel in the second sector. Previously we were clearing exactly 1
sector worth of bytes and as such writing over boot code that may have
been there.
Since we do support more than 8 partitions, make sure to set all fields
in d_partitions. For the first 8 partitions this is unneeded, but for
partitioons 9 and up this compensates for the fact that we don't clear
an entire sector anymore.
Obviously, one cannot use more than 8 partitions when using boot code
that starts right after the disk label.
Relevant GRNs:
107879 - Employ unused bytes after the disklabel in the second sector.
189500 - Revert the part of change 107879 that employs the unused bytes
after the disklabel in the 2nd sector for boot code.
Obtained from: Juniper Networks, Inc.
MFC after: 3 days
1. Iterate over all partitions counted in the label, which can be more
than the number of partitions given to mkimg(1).
2. Start the checksum from the beginning of the label; not the beginning
of the bootarea.
Tested with bsdlabel(8).
MFC after: 3 days
It affects the IPv6 source address selection algorithm (RFC 6724)
and allows override the last rule ("longest matching prefix") for
choosing among equivalent addresses. The address with `prefer_source'
will be preferred source address.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Also, add a missing LIBPANEL dependency for lldb
Approved by: rpaulo (mentor)
Suggested by: brooks
MFC after: 5 days
Phabric: D675 (as part of a larger diff)
PR: 192762
This provides a minor cleanup in elfdump; there are otherwise no
consumers in the tree. Old SUN documentation can be found for either
variant, but GNU binutils switched to DT_FEATURE around 2000.
Sponsored by: The FreeBSD Foundation
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
mount_nfs effectively uses mount protocol v3 by default already.
v1 mount protocol is being removed along with nfsv2 by a high profile NFS
appliance vendor and our legacy v1 mount protocol usage causes rpc errors.
submitted via r268811
- Install the Kyuafile by adding FILES to FILESGROUPS
- Run the testcases with an unprivileged user
Some of the testcases depend upon behavior that's broken when
run as root on FreeBSD because of how permissions are treated
with access(2) vs eaccess(2), open(2), etc
- Simplify the test driver to just inspect the exit code from
run_test because it now exits with 0 if successful and exits
with !0 if unsuccessful
- Don't do ad hoc temporary directory creation/deletion; let Kyua
handle that
- Add entries for files removed in r268811 to
OptionalObsoleteFiles.inc
PR: 191020
X-MFC with: r268811
Approved by: jmmv (mentor)
Reviewed by: bapt
Sponsored by: EMC / Isilon Storage Division
