userland via routing socket or sysctl. This eliminates the following
KAME-specific sin6_scope_id handling routine from each userland utility:
sin6.sin6_scope_id = ntohs(*(u_int16_t *)&sin6.sin6_addr.s6_addr[2]);
This behavior can be controlled by net.inet6.ip6.deembed_scopeid. This is
set to 1 by default (sin6_scope_id will be filled in the kernel).
Reviewed by: bz
comma-separated list and/or range specification:
# route add -inet 192.0.2.0/24 198.51.100.1 -fib 1,3-5,6
Although all of the subcommands supports the modifier, "monitor" does not
support the list or range specification at this moment.
Reviewed by: bz
than we're claiming it should still be considered an exact match. This
would previously leak frags that had been extended.
- If there is a sequence number problem in the journal print the sequence
numbers we've seen so far for debugging.
- Clean up the block mask related debuging printfs. Some are redundant.
MFC after: 1 week
seemingly mysterious actions that are not done by ifconfig itself, but
by devd triggering on events caused by ifconfig.
PR: docs/173405
Submitted by: Mateusz Kwiatkowski <mateusz.kwiatkowski@atlashost.eu>
MFC after: 1 week
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.
Suggested by: andre
extended using growfs(8). The problem here is that geom_label checks if
the filesystem size recorded in UFS superblock is equal to the provider
(i.e. device) size. This check cannot be removed due to backward
compatibility. On the other hand, in most cases growfs(8) cannot set
fs_size in the superblock to match the provider size, because, differently
from newfs(8), it cannot recompute cylinder group sizes.
To fix this problem, add another superblock field, fs_providersize, used
only for this purpose. The geom_label(4) will attach if either fs_size
(filesystem created with newfs(8)) or fs_providersize (filesystem expanded
using growfs(8)) matches the device size.
PR: kern/165962
Reviewed by: mckusick
Sponsored by: FreeBSD Foundation
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.
Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks
current version of FreeBSD, this isn't guarenteed by the API. Custom
security modules, or future implementations of the setuid and setgid
may fail.
PR: bin/172289
PR: bin/172290
PR: bin/172291
Submittud by: Erik Cederstrand <erik@cederstrand.dk>
Discussed by: freebsd-security
Approved by: cperciva
MFC after: 1 week
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
This has been developed during 2 summer of code mandates and being revived
by gnn recently.
The functionality in this commit mirrors entirely content of fusefs-kmod
port, which doesn't need to be installed anymore for -CURRENT setups.
In order to get some sparse technical notes, please refer to:
http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html
or to the project branch:
svn://svn.freebsd.org/base/projects/fuse/
which also contains granular history of changes happened during port
refinements. This commit does not came from the branch reintegration
itself because it seems svn is not behaving properly for this functionaly
at the moment.
Partly Sponsored by: Google, Summer of Code program 2005, 2011
Originally submitted by: ilya, Csaba Henk <csaba-ml AT creo DOT hu >
In collabouration with: pho
Tested by: flo, gnn, Gustau Perez,
Kevin Oberman <rkoberman AT gmail DOT com>
MFC after: 2 months
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
First, don't exit when the link goes down on an interface. Instead,
teach dhclient to track changes in link state and to enter the reboot
state when the link on an interface goes up causing dhclient to attempt
to renew its existing lease.
Second, remove the change I added to clear the old lease when dhclient
exits due to an error (such as ifconfig down). If an interface is
using autoconfiguration it should keep its autoconfiguration as much as
possible. If the next time it needs a configuration it is able to reuse
the previous autoconfiguration, then leaving the settings intact allows
existing connections to survive temporary outages, etc.
PR: bin/166656
MFC after: 1 month
Initialize devlist.dev_queue tail queue early enough before its any
potential traversal in freebusdevlist() when in smpphylist error path.
Reported by: Pavel Polyakov <bsd kobyla org> (on irc)
Reviewed by: ken
MFC after: 5 days
link is lost. devd will start a new dhclient instance when link is
restored.
PR: bin/166656
Submitted by: Peter Jeremy (mostly)
Reviewed by: brooks (earlier version from Peter)
MFC after: 1 month
return. This silences a warning from clang 3.2 about uninitialized use
of the variable 'mediasize' in sbin/ggate/shared/ggate.c.
Reviewed by: pjd
MFC after: 1 week
'error' variable to zero, to avoid returning garbage in several cases.
This fixes the following clang 3.2 warnings:
sbin/camcontrol/camcontrol.c:4634:8: warning: variable 'error' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (amt_written == -1) {
^~~~~~~~~~~~~~~~~
sbin/camcontrol/camcontrol.c:4656:10: note: uninitialized use occurs here
return (error);
^~~~~
sbin/camcontrol/camcontrol.c:4619:7: warning: variable 'error' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (fd_response == 0) {
^~~~~~~~~~~~~~~~
sbin/camcontrol/camcontrol.c:4656:10: note: uninitialized use occurs here
return (error);
^~~~~
sbin/camcontrol/camcontrol.c:4617:6: warning: variable 'error' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sbin/camcontrol/camcontrol.c:4656:10: note: uninitialized use occurs here
return (error);
^~~~~
MFC after: 1 week
operate on it if journal size is greater then SUJ_MAX. The later
constant is only to select maximal journal size when user did not
specified size explicitely.
Submitted by: Andrey Zonov <andrey@zonov.org>
Reviewed by: mckusick
MFC after: 1 week
for an uninitialized variable.
unused parameters and variables are annotated with
(void)foo; /* UNUSED */
instead of __unused, because this code needs to build
also on linux and windows.
implementation of RFC 3484 for this purpose for a long time and "prefer_source"
was never implemented actually. ND6_IFF_PREFER_SOURCE macro is left intact.
reads with native speed of the underlying provider.
There are three situations when direct reads are not used:
1. Data is being synchronized and synchronization source is the secondary
node, which means secondary node has more recent data and we should read
from it.
2. Local read failed and we have to try to read from the secondary node.
3. Local component is unavailable and all I/O requests are served from the
secondary node.
Sponsored by: Panzura, http://www.panzura.com
MFC after: 1 month
- Add a note to the ipfw(8) man page about the rules no longer being
case sensitive.
- Fix some typos in the man page.
PR: docs/164772
Reviewed by: bz
Approved by: gabor (doc mentor, src committer)
MFC after: 2 weeks
defect information it has before grabbing the full defect list.
This works around a bug with some Hitachi drives that generate data overrun
errors when they are asked for more defect data than they have.
The change is done in a spec-compliant way, so it should have no negative
impact on drives that don't have this issue.
This is based on work originally done at Sandvine.
scsi_da.h: Add a define for the maximum amount of data that can be
contained in a defect list.
camcontrol.c: Update the readdefects() function to issue an initial
command to determine the length of the defect list, and
then use that length in the request for the full defect
list.
camcontrol.8: Add a note that some drives will report 0 defects available
if you don't request either the PLIST or GLIST.
Submitted by: Mark Johnston <markjdb@gmail.com> (original version)
MFC after: 3 days
ATA/SATA transport. The detection logic is automatic, so it should Just
Work. While here, also improve the progress meter that is displayed
during firmware download.
Submitted by: Alistair Crooks
Obtained from: Netflix, Inc.
MFC after: 3 days
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
must be recalculated. The blk_check pass of suj checker explicitely marks
inodes which owned such blocks as needing block count adjustment. But
ino_adjblks() is only called by cg_trunc pass, which is performed before
blk_check. As result, the block use count for such inodes is left wrong.
This causes full fsck run after journaled run to still find inconsistencies
like 'INCORRECT BLOCK COUNT I=14557 (328 should be 0)' in phase 1.
Fix this issue by running additional adj_blk pass after blk_check, which
updates the field.
Reviewed by: jeff, mckusick
MFC after: 1 week
Currently, 'ifconfig laggX down' does not remove members from this
lagg(4) interface. So, 'service netif stop laggX' followed by
'service netif start laggX' will choke, because "stop" will leave
interfaces attached to the laggX and ifconfig from the "start" will
refuse to add already-existing interfaces.
The real-world case is when I am bundling together my Ethernet and
WiFi interfaces and using multiple profiles for accessing network in
different places: system being booted up with one profile, but later
this profile being exchanged to another one, followed by 'service
netif restart' will not add WiFi interface back to the lagg: the
"stop" action from 'service netif restart' will shut down my main WiFi
interface, so wlan0 that exists in the lagg0 will be destroyed and
purged from lagg0; the "start" action will try to re-add both
interfaces, but since Ethernet one is already in lagg0, ifconfig will
refuse to add the wlan0 from WiFi interface.
Since adding the interface to the lagg(4) when it is already here
should be an idempotent action: we're really not changing anything,
so this fix doesn't change the semantics of interface addition.
Approved by: thompsa
Reviewed by: emaste
MFC after: 1 week
headers for TSO but also for generic checksum offloading. Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.
To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.
Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible). Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation. Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.
This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.
Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.
Individual driver updates will have to follow, as will SCTP.
Reported by: gallatin, dim, ..
Reviewed by: gallatin (glanced at?)
MFC after: 3 days
X-MFC with: r235961,235959,235958
- Add low-level support for SATA Enclosure Management Bridge (SEMB)
devices -- SATA equivalents of the SCSI SES/SAF-TE devices.
- Add some utility functions for SCSI SAF-TE devices access.
Sponsored by: iXsystems, Inc.
- old yacc(1) use to magicially append stdlib.h, while new one don't
- new yacc(1) do declare yyparse by itself, fix redundant declaration of
'yyparse'
Approved by: des (mentor)
Allow tso4 and tso6 be set individually given we have the bits.
This will help with drivers not working as expected during the
transition time and later.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn
MFC After: 1 week
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
them and commit separately.
1. Rewrite the way growfs(8) finds the device and mount point. This makes
it possible to use e.g. "growfs /mnt"; it's also used to display more
helpful messages.
2. Be more user-friendly, using descriptive messages, like this:
OK to grow filesystem on /dev/md0, mounted on /mnt, from 9.8GB to 20GB? [Yes/No]"
3. Allow to specify the size (-s option) just like with mdconfig(8), i.e. with
postfixes ("mdconfig -s 10g").
4. Reload read-only filesystem after growing.
Reviewed by: kib, mckusick (earlier version)
Sponsored by: The FreeBSD Foundation
- Implement "configure" command to allow switching operation mode of
running device on-fly without destroying and recreation.
- Implement Active/Read mode as hybrid of Active/Active and Active/Passive.
In this mode all paths not marked FAIL may handle reads same time,
but unlike Active/Active only one path handles write requests at any
point in time. It allows to closer follow original write request order
if above layers need it for data consistency (not waiting for requisite
write completion before sending dependent write).
- Hide duplicate messages about device status change.
- Remove periodic thread wake up with 10Hz rate.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
summary structure. From now on, when there is no room for it,
we simply allocate new one in a newly added cylinder group.
This patch removes a conditional in updcsloc(), reindents some code
there, and removes unused routines. I decided to do it this way instead
of disabling reallocation when the filesystem is live and leaving it
as it is otherwise, because this allows for removal of lots of complicated
and hard to test code. Also, conditionally disabling it would result
in a different layout in filesystems resized online and offline, which
would look somewhat weird.
Reviewed by: mckusick
No objections from: kib
Sponsored by: The FreeBSD Foundation
reporting a number of bytes rather than a number of pages
PR: misc/165208
Submitted by: Arnaud Lacombe <lacombar@gmail.com>
Approved by: cperciva
MFC after: 3 days
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
Though we should open the TTY with O_NONBLOCK to prevent rc(8) execution
from potentially stalling, we must not forget to clear the flag later
on, to prevent read(2) calls from failing later on.
This prevented the shell pathname prompt from working properly.
Reported by: kib
regardless of whether -F (foreground) option is set or not.
Also, if -P option is specified, ignore pidfile setting from configuration
not only on start but on reload too. This fixes the issue when for hastd
run with -P option reload caused the pidfile change.
Reviewed by: pjd
MFC after: 1 week
net.inet.ip.fw.tables_max is now read-write.
- Bump IPFW_TABLES_MAX to 65535
Default number of tables is still 128
- Remove IPFW_TABLES_MAX from ipfw(8) code.
Sponsored by Yandex LLC
Approved by: kib(mentor)
MFC after: 2 weeks
If the environment doesn't offer a working /dev/console, the existing
version of init(8) will simply refuse running rc(8) scripts. This means
you'll only have a system running init(8) and nothing else.
Change the code to do the following:
- Open /dev/console like we used to do, but make it more robust to use
O_NONBLOCK to prevent blocking on a carrier.
- If this fails, use /dev/null as stdin and /var/log/init.log as stdout
and stderr.
- If even this fails, use /dev/null as stdin, stdout and stderr.
So why us this useful? Well, if you remove the `getpid() == 1' check in
main(), you can now use init(8) inside jails to properly execute rc(8).
It still requires some polishing, as existing tools assume init(8) has
PID 1.
Also it is now possible to use use init(8) on `headless' devices that
don't even have a serial boot console.
- Add support for IPv6 and interface extended tables
- Make number of tables to be loader tunable in range 0..65534.
- Use IP_FW3 opcode for all new extended table cmds
No ABI changes are introduced. Old userland will see valid tables for
IPv4 tables and no entries otherwise. Flush works for any table.
IP_FW3 socket option is used to encapsulate all new opcodes:
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t reserved[3]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
New opcodes added:
IP_FW_TABLE_XADD, IP_FW_TABLE_XDEL, IP_FW_TABLE_XGETSIZE, IP_FW_TABLE_XLIST
ipfw(8) table argument parsing behavior is changed:
'ipfw table 999 add host' now assumes 'host' to be interface name instead of
hostname.
New tunable:
net.inet.ip.fw.tables_max controls number of table supported by ipfw in given
VNET instance. 128 is still the default value.
New syntax:
ipfw add skipto tablearg ip from any to any via table(42) in
ipfw add skipto tablearg ip from any to any via table(4242) out
This is a bit hackish, special interface name '\1' is used to signal interface
table number is passed in p.glob field.
Sponsored by Yandex LLC
Reviewed by: ae
Approved by: ae (mentor)
MFC after: 4 weeks
left-over from ancient C times, and a frequent typo) in growfs.c:
sbin/growfs/growfs.c:1550:8: error: use of unary operator that may be intended as compound assignment (-=) [-Werror]
blkno =- 1;
^~
Use 'blkno = -1' instead, to silence the error.
and fixing the format string in sbin/fsdb/fsdbutil.c instead.
Note the remark "Work around a problem with format string warnings and
ntohs macros" was actually incorrect. The DIP(dp, di_nlink) macro
invocation actually returned an int, due to its ternary expression, even
though the di_nlink members of struct ufs1_dinode and struct ufs2_dinode
are both defined as int16_t.
MFC after: 2 weeks
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.
Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)
As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:
CC=clang
CXX=clang++
CPP=clang-cpp
MFC after: 2 weeks
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.
I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.
MFC after: 1 month
This has the following advantages:
- During boot, the BOOT_TIME record is now written right after the file
systems become writable, but before users are allowed to log in. This
means that they can't cause `hidden logins' by logging in right before
init(8) kicks in.
- The pututxline(3) function may potentially block on file locking,
though this is very rare to occur. By placing it in an rc script, the
user can still kill it with ^C if needed.
- Most importantly: jails don't use init(8). This means that a force
reboot of a system running jails will leave stale entries in the
accounting database of the jails individually.
