This fatal mismatch appeared to be absolutely harmless, since both structs
have pointer to struct ifnet as their first member, and they both point to
the same ifnet. And the first member is the only one used from the argument.
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
applying them to em(4).
Rely on iterations through the local timer, and the tx queue state to
determine if an actual hang has occurred. Any time a descriptor is used
(packet sent), the tx queue is flagged as busy. Then when txeof runs, it
either clears the flag when all is clean, or resets it to 1 if ANY are
cleaned, if nothing is cleaned it increments the flag.
Local timer simply checks to see if busy ever reaches MAX (10, which
is compile time configurable), and then sets it as HUNG, at that point
there is one more timer cycle in which to have any cleans, if not a
watchdog reset will occur.
Differential Revision: https://reviews.freebsd.org/D2019
Submitted by: jfv
Reviewed by: hiren
Obtained from: Intel Corporation
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Limelight Networks
stage processing is only allowed after the setup complete event has
been received. Else a race may occur and the OUT data can be corrupted.
While at it ensure resetting a FIFO has the required wait loop.
MFC after: 3 days
NOTE: This is a technology preview, while it has undergone
development testing, Intel has not yet completed full
validation of the feature. It is being integrated for
early access and customer testing.
NOTE: This is a technology preview, while it has undergone development
tests, Intel has not yet completed full validation of the feature.
It is being integrated for early access and customer testing.
tend to be invalid. On a Beaglebone Black, we get 8192 sectors per
track and that causes major breakages.
Differential Revision: D2646
Reviewed by: ian@ imp@
buildkernel run.
Some of them were write-only under some kernel options, e.g. variables
keeping values only used by CTR() macros. It costs nothing to the
code readability and correctness to eliminate the warnings in those
cases too by removing the local cached values used only for
single-access.
Review: https://reviews.freebsd.org/D2665
Reviewed by: rodrigc
Looked at by: bjk
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
DEBUG_FLAGS are set to DEBUG option value when kernel is built.
For example, it is -g in GENERIC config to have debug symbols.
Also DEBUG_FLAGS are used to determine if ctfconvert should keep
debug symbols.
Since we redefined DEBUG_FLAGS, debug symbols were always missing.
ctfconvert complains about it during kernel build.
It is incorrect to append DEBUG_FLAGS, since if DEBUG has no -g (or
similar), we'll have no debug symbols and ctfconvert will complain.
If it incorrect to always have -g in our DEBUG_FLAGS, since debug
symbols presence should be controllable by kernel config.
So, just add disabled by default addition of -DDEBUG=1 to CFLAGS.
Reviewed by: imp
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2666
Leaf drivers should not import the PCI bus interface to add IOV handling.
Instead, move the IOV client methods to a separate kobj interface.
Differential Revision: https://reviews.freebsd.org/D2584
Reviewed by: rstone
- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mpssas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mps driver to 9.255.01.00-fbsd
PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 1 week
message synced to the changes in r283632, those changes are now backed out.
Another commit will be done that is exactly the same as r283632 except it will
have to correct commit message.
Approved by: ken, scottl, asomers, gibbs
amount of memory.
- Don't request segsize of BUS_SPACE_MAXSIZE_32BIT, when maxsize is
MCLBYTES.
With this change bwi_attach() can succeed on i386.
Submitted by: scottl
Smart NICs with firmware (eg wpi, iwn, the new atheros parts, the intel 7260
series, etc) support doing a lot of things in firmware. This includes but
isn't limited to things like scanning, sending probe requests and receiving
probe responses. However, net80211 doesn't know about any of this - it still
drives the whole scan/probe infrastructure itself.
In order to move towards suppoting smart NICs, the receive path needs to
know about the channel/details for each received packet. In at least
the iwn and 7260 firmware (and I believe wpi, but I haven't tried it yet)
it will do the scanning, power-save and off-channel buffering for you -
all you need to do is handle receiving beacons and probe responses on
channels that aren't what you're currently on. However the whole receive
path is peppered with ic->ic_curchan and manual scan/powersave handling.
The beacon parsing code also checks ic->ic_curchan to determine if the
received beacon is on the correct channel or not.[1]
So:
* add freq/ieee values to ieee80211_rx_stats;
* change ieee80211_parse_beacon() to accept the 'current' channel
as an argument;
* modify the iv_input() and iv_recv_mgmt() methods to include the rx_stats;
* add a new method - ieee80211_lookup_channel_rxstats() - that looks up
a channel based on the contents of ieee80211_rx_stats;
* if it exists, use it in the mgmt path to switch the current channel
(which still defaults to ic->ic_curchan) over to something determined
by rx_stats.
This is enough to kick-start scan offload support in the Intel 7260
driver that Rui/I are working on. It also is a good start for scan
offload support for a handful of existing NICs (wpi, iwn, some USB
parts) and it'll very likely dramatically improve stability/performance
there. It's not the whole thing - notably, we don't need to do powersave,
we should not scan all channels, and we should leave probe request sending
to the firmware and not do it ourselves. But, this allows for continued
development on the above features whilst actually having a somewhat
working NIC.
TODO:
* Finish tidying up how the net80211 input path works.
Right now ieee80211_input / ieee80211_input_all act as the top-level
that everything feeds into; it should change so the MIMO input routines
are those and the legacy routines are phased out.
* The band selection should be done by the driver, not by the net80211
layer.
* ieee80211_lookup_channel_rxstats() only determines 11b or 11g channels
for now - this is enough for scanning, but not 100% true in all cases.
If we ever need to handle off-channel scan support for things like
static-40MHz or static-80MHz, or turbo-G, or half/quarter rates,
then we should extend this.
[1] This is a side effect of frequency-hopping and CCK modes - you
can receive beacons when you think you're on a different channel.
In particular, CCK (which is used by the low 11b rates, eg beacons!)
is decodable from adjacent channels - just at a low SNR.
FH is a side effect of having the hardware/firmware do the frequency
hopping - it may pick up beacons transmitted from other FH networks
that are in a different phase of hopping frequencies.
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Causually read by: gnn
Differential Revision: https://reviews.freebsd.org/D2618
https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.txt
Without this booting the VSATV102 causes the blue "working" led to turn
off when the kernel starts up. With this the led (which is turned on by
the firmware) stays on since that's the default state specified in the FDT.
Expanded the meaning of the led_create_state state parameter in order
to implement support for "keep". The original values were:
== 0 Off
!= 0 On
The new values are:
== -1 don't change / keep current setting
== 0 Off
!= -1 && != 0 On
This should have no effect on acpi_asus_attach which only calls
led_create_state with state set to 1. Updated acpi_ibm_attach
in order to avoid surprises.
Differential Revision: https://reviews.freebsd.org/D2615
Submitted by: John Wehle
Reviewed by: gonzo, loos
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
Kernel under stress load, mixed MC reboot and sfupdate really
generates TSO packet with RST flag.
It will generate many TCP packets with RST flag set.
May be RST flag should be set in the last segment only, but it could be
dropped. So, it is safer to keep the flag in all packets to be sure that
connection is reset.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2609
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).
Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update
GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3
On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is
Differential Revision: https://reviews.freebsd.org/D2146
Reviewed by: rpaulo, ian, Michal Meloun, Svatopluk Kraus
Some FDT nodes have complex properties organized as a child sub-nodes
(e.g. timing for LCD panel) we need easy way to obtain handles for
these sub-nodes
Also remove the checks for IFCAP_LRO in bxe_alloc_fp_buffers() and bxe_pf_rx_q_prep() since both TPA and Jumbo can use SGE ring.
Submitted by:gary.zambrano@qlogic.com
Approved by:davidcs@freebsd.org
MFC after:5 days
MTU + any required pad. Now when this size greater than MJUMPAGESIZE, the packet is spanned across multiple buffers and the
mbufs are stiched together.
Submitted by:gary.zambrano@qlogic.com
Approved by:davidcs@freebsd.org
this value at runtime.
The SD card specification says that a block write or a block erase can take
up to 250ms to complete and thus, under some circumstances, the existent 2
seconds timeout was triggering with normal usage.
This change fixes the sporadic controller timeout that happens on RPi and
RPi 2.
Discussed with: ian (some time ago)
