- When operating on a core file (-M) and -c is specified we don't clear
the message buffer of the running system.
- If we don't have permission to clear the buffer print the error message
only. That's what Linux does in this case, where this feature was ported
from, and it ensures that the error message doesn't get lost in the noise.
Discussed with: antoine, cognet
Approved by: cognet
This allows setting attributes on tables. One simply does not provide
an index in that case. Otherwise the entry corresponding the index has
the attribute set or unset.
Use this change to fix a relatively longstanding bug in our GPT scheme
that's the result of rev 198097 (relatively harmless) followed by rev
237057 (damaging). The damaging part being that our GPT scheme always
has the active flag set on the PMBR slice. This is in violation with
EFI. Existing EFI implementions for both x86 and ia64 reject the GPT.
As such, GPT disks created by us aren't usable under EFI because of
that.
After this change, GPT disks never have the active flag set on the PMBR
slice. In order to make the GPT disk bootable under some x86 BIOSes,
the reason of rev 198097, one must now set the active attribute on the
gpt table. The kernel will apply this to the PMBR slice For (S)ATA:
gpart set -a active ada0
To fix an existing GPT disk that has the active flag set in the PMBR,
and that does not need the flag, use (again for (S)ATA):
gpart unset -a active ada0
The EBR, MBR & PC98 schemes, which also impement at least 1 attribute,
now check to make sure the entry passed is valid. They do not have
attributes that apply to the table.
The "failok" option doesn't have any effect at all unless specified in
fstab(5) and combined with the -a flag. The "failok" option is already
documented in fstab(5).
PR: 177630
No objection: eadler
MFC after: 1 week
recreating the filesystem, check for and output the -i, -k, and -l
options if appropriate.
Note the remaining deficiencies of the -m option in the dumpfs(8)
manual page. Specifically that newfs(8) options -E, -R, -S, and -T
options are not handled and that -p is not useful so is omitted.
Also document that newfs(8) options -n and -r are neither checked
for nor output but should be. The -r flag is needed if the filesystem
uses gjournal(8).
PR: bin/163992
Reported by: Dieter <freebsd@sopwith.solgatos.com>
Submitted by: Andy Kosela <akosela@andykosela.com>
MFC after: 1 week
If an expander returns 0x00 (no device attached) in the ATTACHED DEVICE
field of the SMP DISCOVER response, ignore the value of ATTACHED SAS
ADDRESS, because it is invalid. Some expanders zero out the address
when the attached device is removed, but others do not. Section
9.4.3.10 of the SAS Protocol Layer 2 revision 04b does not require them
to do so.
Approved by: ken (mentor)
MFC after: 3 weeks
been printed. This provides compatibility with other *nix systems
(including Linux).
While here use stdbool booleans for 'all'.
PR: bin/178295
Submitted by: Levent Serinol <lserinol@gmail.com>
Reviewed by: will
This adds the support to the config keyword (vlan operation mode), ports
flags, prints the vlan mode and vlan capabilities. It also adds some basic
information to usage() and support the keyword 'help' as a shortcut to
usage(). The manual page is also updated with the new options.
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
Address. Although KAME implementation used FF02:0:0:0:0:2::/96 based on
older versions of draft-ietf-ipngwg-icmp-name-lookup, it has been changed
in RFC 4620.
The kernel always joins the /104-prefixed address, and additionally does
/96-prefixed one only when net.inet6.icmp6.nodeinfo_oldmcprefix=1.
The default value of the sysctl is 1.
ping6(8) -N flag now uses /104-prefixed one. When this flag is specified
twice, it uses /96-prefixed one instead.
Reviewed by: ume
Based on work by: Thomas Scheffler
PR: conf/174957
MFC after: 2 weeks
names within the std namespace (and possibly within the global
namespace).
The main advantage is that the C++ versions can provide optimized
versions or simplified interfaces.
piece them together from multiple reads(). It's as if /dev/devctl is
a datagram device instead of a stream device. However, devd's
internal buffer was too small (1025 bytes) to read an entire
ereport.fs.zfs.checksum event (variable, up to ~1300 bytes). This
commit enlarges the buffer to 8k.
Reviewed by: imp
Approved by: ken (mentor)
MFC after: 2 weeks
than VLAN groups.
Some chips (eg this rtl8366rb) has a VLAN group per port - you first
define a set of VLANs in a vlan group, then you assign a VLAN group
to a port.
Other chips (eg the AR8xxx switch chips) have a VLAN ID array per
port - there's no group per se, just a list of vlans that can be
configured.
So for now, the switch API will use the latter and rely on drivers
doing the heavy lifting if one wishes to use the VLAN group method.
Maybe later on both can be supported.
PR: kern/177878
PR: kern/177873
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
This compiler flag enforces that that people either mark variables
static or use an external declarations for the variable, similar to how
-Wmissing-prototypes works for functions.
Due to the fact that Yacc/Lex generate code that cannot trivially be
changed to not warn because of this (lots of yy* variables), add a
NO_WMISSING_VARIABLE_DECLARATIONS that can be used to turn off this
specific compiler warning.
Announced on: toolchain@
