RFCOMM channel if needed. There is really no good reason to not to support
this. AT-command exchange can be faked with chat script in ppp.conf.
MFC after: 1 week
from a group without the need to perform the same operation by replacing
the existing list via the '-M' option. The '-M' option requires someone
to fetch the existing members with pw, deleting the undesired members from
the list and sending the altered list back to pw.
Approved by: wes (mentor)
MFC after: 5 days
find the corresponding AS for that IP (-a switch).
We can also choose a different whois server with the -A switch. The
default is whois.radb.net.
Obtained from: NetBSD
Reviewed by: bms, njl (mentor)
Approved by: njl (mentor)
1) Use [AP]F_LOCAL rather than [AP]F_UNIX.
2) When copying a pipe's name, use f->f_un.f_pipe.f_pname, not f->f_un.f_fname.
PR: 20889
Submitted by: Damieon Stark
PR: 116642
Submitted by: Jim Pirzyk
Reviewed by: md5
for rpcbind(8) to crash.
The crash was due to a boolean variable initialized
improperly. Besides fixing the initialization, pick
a better name for the variable so that its meaning is
clear and no more coding errors appear around it.
due to the way watch(8) looks for available snoop devices.
PR: bin/118286
Submitted by: Mykola Zubach <zuborg@advancedhosters.com>
Reviewed by: rwatson, csjp, imp (all a long time ago)
Approved by: imp (mentor) (long time ago)
MFC after: 1 week
FTSENTs and uses only what fts_read() has just returned can rely
on fts_path being NUL-terminated. Under these conditions, a plain
vanilla "%s" format can be safely used to printf an fts_path.
OK'ed by: rwatson
Use ioctl() to get the window size in iostat(8), and force a new
header to be prepended to the output every time the current
window size changes. Change the number of lines before each
header to `rows - 3' when the terminal is resized, so that the
full terminal length can be used for output lines.
PR: bin/119705
Submitted by: keramida
Approved by: maxim
MFC after: 2 weeks
-d destdir option. For an automounted src tree using the logical cwd
in the Makefile keeps amd(8)'s mount timeout refreshed. Code to check
$PWD's validity cribbed from pwd(1).
Discussed on hackers@.
remove the format specification from mtree.8.
I also need to reconcile a few issues between this
mtree.5 and what is actually implemented in FreeBSD's
mtree utility.
MFC after: 30 days
probably the right thing to do a while ago but xorg has progressed
to the point that for novice users (who are the ones expected to think
installing X11 during an install...) it's best to just install the
whole x11/xorg metaport for them. This removes the X11 sub-menus
and sets it up so you just select whether or not you want X11. While
here garbage collect an X11 configuration menu I missed removing when
I removed support for attempting xorg configuration from inside sysinstall
a while ago.
Discussed with: rwatson, kris
No objection from: re
Release build tested by: rwatson
MFC after: 1 week
we would leak a saved screen for every other package we tried to install
that listed perl as one of its dependencies. When installing things
like gnome and kde that wound up being a LOT of leaked memory.
Insta-MFC request coming so this can be tested as part of 6.3-RC2...
Testing help from: kris
paragraph clarifying that portsnap does not behave the same way as
cvs and cvsup where local modifications are concerned.
Submitted by: peter
Feet shot: peter, kris, obrien, + many others
too small for today's standards. While loading packages sysinstall
blows past this by a LOT but I think (hope...) that's caused by other
bugs. I'll look more into why sysinstall's memory use has gotten so
out of control as it loads packages but independent of that there really
is no reason to leave the limits on datasize and stacksize in place. And
they can cause problems for some of the things "modern packages" might
be doing via pkg_add which gets run by sysinstall and would inherit the
limits.
Another insta-MFC probably coming, this is holding up 6.3-RC2. Sysinstall's
memory use is so out of control it blows past the current limit before it
finishes loading either of the meta-packages kde or gnome...
manual's Appendix D ("Old Features Supported but not Encouraged") in
the Seventh Edition Unix Programmer's Manual (January, 1979) by
retiring the " = {" method of of action specification in favor of a
plain "{". It is no longer necessary for this bootstrap program to
be compatible with 6th Edition systems. Some yaccs in the wild do not
support this old syntax any more, and compatibility with those systems
is more important these days (as there are easily 7 orders of magnitude
more of them than real v6 systems today).
Reviewed by: jhb@ and dds@ (the latter gave the reference).
"build dependencies" field is 5,108 characters which overflows the
length of the junk buffer by a teeny bit. This whole section needs
much more error checking but for now just completely ignore stuff
we have no interest in instead of copying it to someplace we don't
use in the process.
Insta-MFC probably coming since this is holding up 7.0-RC1...
1. Start mergemaster
2. Interrupt it
3. < Somehow the temproot directory disappears >
4. mergemaster -r
Many bad things can happen, especially if the -i option is in use.
Therefore, add a check to make sure it still exists before we start
comparing files.
Brought to my attention by:
PR: bin/40538
Submitted by: Cyrille Lefevre <cyrille.lefevre@laposte.net>
xorg-server doesn't include any video drivers so install xorg-drivers as
well. And if font-alias isn't installed the X server won't start,
complaining it can't find the font "fixed".
Insta-MFC coming, this was tested with a RELENG_6_3 release build and
the necessary packages as part of the first round of testing for 6.3-RC2.
for the port to drain).
+ Handle "*" as a priority properly.
+ Test what is free'ed.
+ Dynamically determine length vs. hardcoding it.
+ Free the previous message buffer (f_prevline) only after logging all the
messages and just before the process exit. Also check f_prevline for NULL
before using it.
+ The time displayed is not synchornized with the other log destinations.
+ Fix a comment.
Obtained from: Juniper Networks
approval. These changes were approved by adding it as port to
ports/ tree, but not for src/. I talked to PR submitter and miwi@
some days ago and explained the reasons for it, the both were agree
to add it to ports/ only.
order. This allows direct comparison of the output of two different
runs, regardless of the order in which readdir(2) returns directory
entries.
MFC after: 3 weeks
to autoamu_autofs_prot.h. It is easier to just create shell header within
the Bmake framework.
For now it's a stub - fill out when we know our Autofs direction.
- Print a warning if the version number recorded in the log is not what the
tool expects.
- Print a tidier error message when an unrecognized event is encountered
in the log.
- Don't print a spurious 'Unknown error: 0' when exiting after a parse
error.
doesn't use the default CFLAGS which contain -fno-strict-aliasing.
Until the code is cleaned up, just add -fno-strict-aliasing to the
CFLAGS of these for the tinderboxes' sake, allowing the rest of the
tree to have -Werror enabled again.
shared object files which have the same name as currently-installed
shared object files should be reinstalled after binaries are rolled
back. The order for rolling back updates is therefore
1. Install any old shared object files which can be installed without
overwriting a new shared object file.
2. Rollback everything which isn't a shared object or kernel file.
3. Rollback any shared object files which we didn't deal with in (1).
4. Rollback to the old kernel.
Bug reported by: Jan Henrik Sylvester
MFC after: 3 days
upgrading to new releases. Important parts of this code include
* automatically determining which optional components (e.g., src,
info, proflibs) are installed.
* merging changes in files which are modified locally and have
changed between the currently running and new release.
* prompting the user to rebuild all 3rd party software before
deleting old shared libraries.
Yes, this is compatible with "freebsd-update rollback" -- you can
test a new -BETA and roll back to the old release if you don't
like it.
Subject to re@ approval, this will be MFCed before 7.0-BETA3 and
6.3-RC1.
MFC after: 2 days
* When installing updates, make sure that securelevel <= 0. Otherwise
we can't remove the schg flag from files.
* When preparing to download updates, check to see if we already have
them sitting in the /files/ directory. This saves bandwidth if users
run "freebsd-update fetch" more than once without installing updates
in between.
While I'm here, bump the copyright date.
MFC after: 3 days
wpa_supplicant expects that it has exclusive access to the net80211 state so
when its starts poking in the WEP/WPA settings and the card is already
scanning it can cause net80211 to try and associate incorrectly with a
protected AP.
This is an inconvenience for firmware based cards such as iwi where it can be
sent an auth instruction with incomplete security info and cause a firmware
error.
Remove the 'ifconfig up' from network.subr since wpa_supplicant will
immediately down the interface again.
Reported by: Guy Helmer (and others)
Reviewed by: sam, brooks, avatar
MFC after: 3 days
all ports/UPDATING entries that affect one of the installed ports,
and are relevant on the given machine.
PR: bin/117564
Submitted by: Beat Gaetzi <beat@chruetertee.ch>
MFC after: 14 days
nfsd(8), in mountd(8), and in rpc.statd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.
PR: bin/98500
MFC after: 1 week
and in mountd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.statd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.statd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
(coming for rpc.lockd too)
PR: bin/98500
MFC after: 1 week
caused a segfault. It turns out that in pre-7.0 systems if you do
getenv("amd_enable=YES") it will return the setting of the environment
variable "amd_enable" but now it returns NULL. I think I found the
places where sysinstall was potentially relying on that old behavior.
Fix is to make a copy of the string to be used for the getenv(3) call,
look for a '=' character in it, and replace it with '\0' if one is
found. Stuck to sysinstall's typical coding standards despite urges
to do otherwise.
PR: 117642
MFC after: 2 days
argv[1] to mimic crt0 behaviour. Do the job by a direct assignment
to __progname in order to stay compatible with NetBSD, whose
setprogname() is a deliberate no-op.
The reason for this change is that some programs (usually those
imported from NetBSD) use getprogname() to distinguish between their
aliases. (See pkill aka pgrep for example.)
This change can be useful, and applicable, to NetBSD, too.
pkg_version tried to open instead of just "INDEX" to make the actual
problem more clear (e.g. missing INDEX-8).
MFC after: 3 days
Reviewed by: portmgr (pav)
own line. We made this change in traceroute(8) some time ago. This
is particularly useful when you are not resolving hostnames since ip6
addresses can be quite long, and lines wrap fairly easily in the
multi-path router case.
Discussed with: bz
MFC after: 1 month
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, mountd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, mountd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
PR: bin/114097
Reviewed by: pjd (an eariler version of the patch)
MFC after: 1 week
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
gets cleaned up upon receiving SIGINT. This un-breaks subsequent
executions of ipfwpcap and helps when debugging network/divert
issues like this:
ipfwpcap -r 6000 - | tcpdump -r -
MFC after: 1 week
with identical meaning as the colon ":". This is to support a syntax
that is more similar to a PCI device specification in the device hints
file. The selector is not fully compatible with the specification in
the hints file, since entries in that file use a different prefix,
which needs to be added to the getsel() routine, if full support of
that syntax is found to be desirable.
Approved by: re (Ken Smith)
PCI selectors with 2 or 3 elements behave exactly as before (i.e. the
domain is 0 and in the 2 element case, the function is also 0).
The form with 4 selector elements works as in the previous revision
and provides the PCI domain number as the left-most selector element.
This change allows old scripts (which used the 2 or 3 selector element
formats) to be kept. Without this patch, the 3 element form was parsed
as starting with a domain number (and the function was assumed to be 0),
with this patch, the domain is assumed to be 0 (and the last value is
used as the function number).
The man page is updated to describe the new selector semantics.
Approved by: re (Ken Smith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
WPA_SUPPLICANT_CFLAGS, etc. (consult the Makefile's for details)
o enable ipv6 support in hostapd (for communication w/ a radius backend)
PR: bin/116164
Submitted by: "Scot Hetzel" <swhetzel@gmail.com>
Approved by: re (gnn)
MFC after: 2 weeks
from EoL minus 6 months to EoL minus 3 months, in order to increase the odds
of there actually being a more recent release to which users can upgrade.
(In particular, for releases which are only supported for 12 months, it's
quite likely that the next release will occur between 6 and 9 months later.)
Discussed with: kensmith
Approved by: re (bmah)
MFC after: 3 days
message and then dumps core because the subsequent code assumes that
mmap() succeeded. Since rpc.statd does not have fallback code to
implement the functionality needed to operate on the status file if
it is not memory mapped, rpc.statd should use err() to force the process
to exit if the mmap() call fails.
PR: bin/115430 (mmap() failure previously fixed in statd.c 1.15)
Approved by: re (kensmith)
MFC after: 1 week
object to control the value of the new 'PRIVATE' bridge members' flag.
While here, remove stale '__unused' compiler directives.
Reviewed by: bz
Approved by: re (bmah), bz (mentor)
patching and for rolling back updates, don't copy a file if it has already
been stored. This provides a significant speedup to the "Preparing to
download files" stage of "freebsd-update fetch" if many updates have already
been applied or if a file being updated is linked many times (such as
/rescue/*).
Reported by: Paul Dekkers
MFC after: 1 week
Approved by: re (bmah)
otherwise mmap() gets called multiple times, which eventually fails due
to address space exhaustion on i386.
Approved by: re (kensmith)
MFC after: 1 week
variable bug that's hidden by the precense of the hint_acpi_0_rsdp
hint on 386 and amd64. There's never a need for such hint on ia64.
Approved by: re (kensmith)
This tool allows fine grained enabling of the debugging output in net80211 and
its useful to have it available to everyone to diagnose wifi issues.
Approved by: re (rwatson)
FreeBSD 6.2, but it didn't make it into RELENG_6_2.
Update the manual page to say "FreeBSD 6.3".
PR: docs/114429
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
MFC after: 3 days
Approved by: re (bmah)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
o unix domain socket to wpa_cli is configured w/ CONFIG_CTRL_IFACE_UNIX
o terminate on last interface option is configured w/ CONFIG_TERMINATE_ONLASTIF
o ndis/Packet32.c fixups to force roaming mode to manual
o document new mixed_cell config knob
Submitted by: thompsa (Packet32.c)
Reviewed by: thompsa, sephe
Approved by: re (hrs)
This was needed during the IPSEC->FAST_IPSEC->IPSEC transition
period to not break the build after picking up netipsec header
files. Now that the FAST_IPSEC kernel option is gone and the
default is IPSEC again those defines are superfluous.
Approved by: re (rwatson)
setenv(3) by tracking the size of the memory allocated instead of using
strlen() on the current value.
Convert all calls to POSIX from historic BSD API:
- unsetenv returns an int.
- putenv takes a char * instead of const char *.
- putenv no longer makes a copy of the input string.
- errno is set appropriately for POSIX. Exceptions involve bad environ
variable and internal initialization code. These both set errno to
EFAULT.
Several patches to base utilities to handle the POSIX changes from
Andrey Chernov's previous commit. A few I re-wrote to use setenv()
instead of putenv().
New regression module for tools/regression/environ to test these
functions. It also can be used to test the performance.
Bump __FreeBSD_version to 700050 due to API change.
PR: kern/99826
Approved by: wes
Approved by: re (kensmith)
be marked as HTTP/1.1 but "Connection: Keep-Alive" is added; this convinces
HTTP/1.0 servers and proxies to hold the TCP connection open despite not
being able to use HTTP pipelining.
This dramatically cuts down on the number of TCP connections (and thus port
numbers) used by portsnap when talking to an HTTP/1.0 proxy (e.g., squid),
and has the side benefit of improving performance in those cases.
Tested by: simon
Approved by: re (kensmith)
MFC After: 1 week
The man page part of the patch is my fault, the changes to the
periodic script is Dominik's.
PR: 88486
Submitted by: Dominik Brettnacher <domi@saargate.de>
Reviewed by: brian
Approved by: re
MFC after: 1 month
Improvements:
* /etc/rc.suspend,rc.resume are always run, no matter the source of the
suspend request (user or kernel, apm or acpi)
* suspend now requires positive user acknowledgement. If a user program
wants to cancel the suspend, they can. If one of the user programs
hangs or doesn't respond within 10 seconds, the system suspends anyway.
* /dev/apm is clonable, allowing multiple listeners for suspend events.
In the future, xorg-server can use this to be informed about suspend
even if there are other listeners (i.e. apmd).
Changes:
* Two new ACPI ioctls: REQSLPSTATE and ACKSLPSTATE. Request begins the
process of suspending by notifying all listeners. acpi is monitored by
devd(8) and /dev/apm listener(s) are also counted. Users register their
approval or disapproval via Ack. If anyone disapproves, suspend is vetoed.
* Old user programs or kernel modules that used SETSLPSTATE continue to
work. A message is printed once that this interface is deprecated.
* acpiconf gains the -k flag to ack the suspend request. This flag is
undocumented on purpose since it's only used by /etc/rc.suspend. It is
not intended to be a permanent change and will be removed once a better
power API is implemented.
* S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z.
This restores previous behavior of halt/shutdown -p being the interface.
* Miscellaneous improvements to error reporting
Approved by: re
This speeds up registration of packages considerably.
- style(9) police welcome!
PR: bin/112630
Submitted by: Stephen Montgomery-Smith <stephen@cauchy.math.missouri.edu>
Tested by: bento i386 experimental run
MFC after: 14 days
when linear acceleration (-a) was enabled with a <1 value to slow them down.
Previously, rounding errors would eat small movements so the mouse had to be
moved a certain distance to get any movement at all. We now calculate the
rounding errors and take them into account when reporting movement.
PR: bin/113749
Submitted by: Oliver Fromme <olli -at- secnetix.de>
MFC after: 3 days
by unavailable accounts, e.g., those locked, expired, not allowed in at
the moment by nologin(5), or whatever, depending on cron's pam.conf(5).
This applies to personal crontabs only, /etc/crontab is unaffected.
In other words, now the account management policy will apply to
commands scheduled by users via crontab(1) so that a user can no
longer use cron(8) to set up a delayed backdoor and run commands
during periods when the admin doesn't want him to.
The PAM check is done just before running a command, not when loading
a crontab, because accounts can get locked, expired, and re-enabled
any time with no changes to their crontabs. E.g., imagine that you
provide a system with payed access, or better a cluster of such
systems with centralized account management via PAM. When a user
pays for some days of access, you set his expire field respectively.
If the account expires before its owner pays more, its crontab
commands won't run until the next payment is made. Then it'll be
enough to set the expire field in future for the commands to run
again. And so on.
Document this change in the cron(8) manpage, which includes adding
a FILES section and touching the document date.
X-Security: should benefit as users have access to cron(8) by default
- Add and document the KVM and KVM_SUPPORT options that
are needed for the ifmcstats(3) makefile
- Garbage collect unused variables
- Add missing inclusion of bsd.own.mk where needed
Approved by: kan (mentor)
Reviewed by: ru
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
ntpd's "-4" and "-6" options are described in the original documentation
(contrib/ntp/html/ntpd.html). It may be original's doc bug.
PR: docs/112642
Submitted by: Seth Hieronymus<shieronymus@speakeasy.net>
Discussed with: ume
MFC after: 1 week
id used by sysinstall when enabling anonymous FTP.
Change the default group used by sysinstall for setting up anonymous FTP
from operator to ftp; there is no reason to use operator and there are
potential security issues when doing so.
PR: 93284
Approved by: ru (mentor)
Reviewed by: simon
change the way of what ppp submits to the RADIUS server
as NAS-Port-Id. Possible options are: the PID of the process
owning the corresponding interface, tun(4) interface number,
interface index (as it would get returned by if_nametoindex(3)),
or it's possible to keep the default behavior. Check the ppp(8)
manual page for details.
PR: bin/112764
Submitted by: novel (myself)
Reviewed by: flz
Approved by: flz
MFC after: 1 month
this bug and submitted these patches to dunstan@. He sent them to me
to test, and I discovered they were needed for the atmel kernel config
files. Since we were playing with them in the terminal room after the
developer's summit today, I thought I'd go ahead and commit them to
allow those folks that now have atmel hardware (thanks Andre) a chance
to try it out w/o my help. Since dunstan@ is asleep right now, risk
stepping on his toes a little by going ahead and committing this
change.
Submitted by: dunstan@, bde@
Tested by: bde@
operating with the "-b basedir" option would not correctly update files
which had flags set or were hardlinked.
Submitted by: Karsten Schmidt
Pointy hat to: cperciva
MFC after: 1 week
is caused by my latest changes to config(8). You're supposed to install new
config(8) in order to prevent yourself from seeing a warning about old
version of that tool.
You should configure the kernel with a new config(8) then.
Oked by: rwatson, cognet (mentor)
Remember about tricky cases, where options contain unfriendly characters,
from the ANSI-C string point of view ('"' in this case). The x09 build
breakage was caused by SC_CUT_SEPCHARS options.
I did test this patch number of times; each time unprofessionally and
inappropriately.
OKed by: cognet (mentor)
This change will let us to have full configuration of a running kernel
available in sysctl:
sysctl -b kern.conftxt
The same configuration is also contained within the kernel image. It can be
obtained with:
config -x <kernelfile>
Current functionality lets you to quickly recover kernel configuration, by
simply redirecting output from commands presented above and starting kernel
build procedure. "include" statements are also honored, which means options
and devices from included files are also included.
Please note that comments from configuration files are not preserved by
default. In order to preserve them, you can use -C flag for config(8). This
will bring configuration file and included files literally; however,
redirection to a file no longer works directly.
This commit was followed by discussion, that took place on freebsd-current@.
For more details, look here:
http://lists.freebsd.org/pipermail/freebsd-current/2007-March/069994.htmlhttp://lists.freebsd.org/pipermail/freebsd-current/2007-May/071844.html
Development of this patch took place in Perforce, hierarchy:
//depot/user/wkoszek/wkoszek_kconftxt/
Support from: freebsd-current@ (links above)
Reviewed by: imp@
Approved by: imp@
Not because I admit they are technically wrong and not because of bug
reports (I receive nothing). But because I surprisingly meets so
strong opposition and resistance so lost any desire to continue that.
Anyone who interested in POSIX can dig out what changes and how
through cvs diffs.
