in revision 1.48. It is pretty valid and often feasible to use
a non-point-to-point interface as the gateway. One might, for
example, use this to route some hosts through an ARP on a local
interface, without having to assign an additional IP address:
Script started on Tue Jun 12 16:16:09 2001
# ifconfig rl0 inet
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.4.115 netmask 0xffffff00 broadcast 192.168.4.255
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1197
# route add -net 192.168.100 -iface rl0
add net 192.168.100: gateway rl0
# ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes
64 bytes from 192.168.100.1: icmp_seq=0 ttl=255 time=0.551 ms
64 bytes from 192.168.100.1: icmp_seq=1 ttl=255 time=0.268 ms
^C
--- 192.168.100.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.268/0.410/0.551/0.142 ms
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1165
192.168.100 link#1 UCSc 1 0 rl0 =>
192.168.100.1 0:d0:b7:16:9c:c6 UHLW 1 4 rl0 1192
Script done on Tue Jun 12 16:17:12 2001
This is needed to pick up the right headers. Wrong headers from
src/contrib/ipfilter are used otherwise.
The right fix would be to fix contrib/ipfilter C sources to pick up
headers from <sys/netinet>.
Noticed by: peter
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
the individual options to increment argv and decrement argc. This
caused the -T option to swallow an extra argument.
PR: 27982
Submitted by: Samuel Greear <sgreear@vsni.com>
a route to the gateway and caches it in the route structure.
It may happen (if the routing table is screwed) that the gateway
route is the same route as the one being modified, in which case
a kernel reports EDQUOT. Be more verbose about this:
# route add -net 10 192.168.4.65
add net 10: gateway 192.168.4.65
# netstat -rn -finet
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.4.65 UGSc 1 7 rl0
10 192.168.4.65 UGSc 0 0 rl0
127.0.0.1 127.0.0.1 UH 0 178 lo0
192.168.4 link#1 UC 2 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 2 0 rl0 1123
Before:
# route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: Disc quota exceeded
After:
# ./route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: gateway uses the same route
PR: bin/1093, misc/26833
blackhole(4), except that blackhole(4) uses sysctl's. This xref
obviously isn't appropriate unless we want to xref all the other man
pages which mention sysctls, which we obviously don't (we may want to
list those sysctls, but that's another story).
PR: 27937
Submitted by: yar
PR: bin/12489
- Use inet_ntoa(3) where it should have been used. This
part of code simply wasn't converted to the "new" style
after the routename() function was converted from the
protocol-generic version to protocol-specific version
in CSRG revision 5.6.
MFC after: 1 week
but list them if -d was specified).
Avoid listing expired dynamic rules unless the (new) -e option was specified.
If specific rule numbers were listed on the command line, and the -d flag was
specified, only list dynamic rules that match the specified rule numbers.
Try to partly clean up the bleeding mess this file has become. If there is
any justice in this world, the responsible parties (you know who you are!)
should expect to wake up one morning with a horse's head in their bed. The
code still looks like spaghetti, but at least now it's *properly intented*
spaghetti (hmm? did somebody say "tagliatelle"?).
when comparing with the alternate superblock. These fields are used
for temporary in-core information only. This should fix the "VALUES
IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE" error from
fsck_ffs that has been seen a lot recently.
attempting to remove nonexistant exports with MNT_DELEXPORT returns
an error; before this change it always succeeded. This caused
mountd(8) to log "can't delete exports for /whatever" warnings.
Change the error code from EINVAL to a more specific ENOENT, and
make mountd ignore this error when deleting the export list. I
could have just restored the previous behaviour of returning success,
but I think an error return is a useful diagnostic.
Reviewed by: phk
printed on a single, very long, and generally unreadable line. This
isn't very useful. It's also really ugly and most of the time you don't
care what media is supported anyway.
PR: 27701
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
- introduce a -o option that displays opaque variables.
- introduce a -x option that displays opaque variables in full.
- deprecate -A in favor of -ao and -X in favor of -ax.
- remove -A and -X from usage() and SYNOPSIS (but not from DESCRIPTION).
- ignore -a if one or more variables were listed on the command line.
- deprecate -w, it is not needed to determine the user's intentions.
- some language and style cleanup in the man page.
This commit should not break any existing scripts.
MFC after: 4 weeks
despite the fact that most people want to set exactly the same settings
regardless of which card they have. It has been repeatidly suggested
that this configuration should be done via ifconfig. This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers. It also provides partial, untested support for the
awi driver.
PR: 25577
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
